This fixes piglit shaders@glsl-fs-uniform-array-loop-unroll with immediate
shader compilation - it's a compiler test, so it has never been translated
to TGSI before.
Cc: 10.4 10.5 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Brian Paul <brianp@vmware.com>
The ir_tex opcode turns into a sample or sample_c message, which will try to
compute derivatives to determine the lod. This produces garbage for
non-fragment shaders where the sample coordinates don't correspond to
subspans.
We fix this by rewriting the opcode from ir_tex to ir_txl and setting the
lod to 0.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=89457
Cc: "10.5" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Kristian Høgsberg <kristian.h.kristensen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
As mentioned by Michel Dänzer for LLVM >= 3.6 we create the
LLVMTargetMachine (with triple amdgcn--), as we setup the radeonsi
context. For older LLVM or hardware (r600) the triple is always r600--
and is created at a later stage - radeon_llvm_compile()
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Commit 5a06ee738 added a step to the generator to set up the message
header when generating the VS_OPCODE_PULL_CONSTANT_LOAD_GEN7
instruction. That pseudo opcode is implemented in terms of multiple
actual opcodes, one of which writes to one of the source registers in
order to set up the message header. This causes problems because the
scheduler isn't aware that the source register is written to and it
can end up reorganising the instructions incorrectly such that the
write to the source register overwrites a needed value from a previous
instruction. This problem was presenting itself as a rendering error
in the weapon in Enemy Territory: Quake Wars.
Since commit 588859e1 there is an additional problem that the double
register allocated to include the message header would end up being
split into two. This wasn't happening previously because the code to
split registers was explicitly avoided for instructions that are
sending from the GRF.
This patch fixes both problems by splitting the code to set up the
message header into a new pseudo opcode so that it will be done
outside of the generator. This new opcode has the header register as a
destination so the scheduler can recognise that the register is
written to. This has the additional benefit that the scheduler can
optimise the message header slightly better by moving the mov
instructions further away from the send instructions.
On Skylake it appears to fix the following three Piglit tests without
causing any regressions:
gs-float-array-variable-index
gs-mat3x4-row-major
gs-mat4x3-row-major
I think we actually may need to do something similar for the fs
backend and possibly for message headers from regular texture sampling
but I'm not entirely sure.
v2: Make sure the exec-size is retained as 8 for the mov instruction
to initialise the header from g0. This was accidentally lost
during a rebase on top of 07c571a39f.
Split the patch into two so that the helper function is a separate
change.
Fix emitting the MOV instruction on Gen7.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=89058
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
There were three places in the visitor that had a similar chunk of
code to emit the VS_OPCODE_PULL_CONSTANT_LOAD opcode using a register
for the offset. This patch combines the chunks into a helper function
to reduce the code duplication. It will also be useful in the next
patch to expand what happens on Gen9+. This shouldn't introduce any
functional changes.
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
`interface` is a define on Windows -- an alias for `struct` keyword,
used when declaring COM interfaces in C or C++.
So use instead `programInterface`, therefore matching the name used
in GL_ARB_program_interface_query spec/headers, which was renamed exactly
for the same reason:
"Revision 10, May 10, 2012 (pbrown)
- Rename the formal parameter <interface> used by the functions in this
extension to <programInterface>. Certain versions of the Microsoft
C/C++ compiler and/or its headers cause "interface" to be treated as a
reserved keyword."
Trivial.
Use _mesa_program_resource_index to get index.
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Martin Peres <martin.peres@linux.intel.com>
Use _mesa_program_resource_index to get indices.
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Martin Peres <martin.peres@linux.intel.com>
Use _mesa_program_resource_location to get location.
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Martin Peres <martin.peres@linux.intel.com>
Use _mesa_get_program_resource_name to get name.
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Martin Peres <martin.peres@linux.intel.com>
Use _mesa_get_program_resource_name to get name.
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Martin Peres <martin.peres@linux.intel.com>
Patch adds new function 'mesa_bufferiv' and refactors existing
GetActiveUniformBlockiv and GetActiveAtomicCounterBufferiv to
use it.
corresponding Piglit tests:
arb_uniform_buffer_object*
arb_shader_atomic_counters*
(Many tests hit the corresponding queries.)
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Martin Peres <martin.peres@linux.intel.com>
Use _mesa_program_resource_location_index to fetch index.
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Martin Peres <martin.peres@linux.intel.com>
Use program_resource_location to fetch location.
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Martin Peres <martin.peres@linux.intel.com>
Use program_resource_location to fetch location.
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Martin Peres <martin.peres@linux.intel.com>
Instead of iterating IR, retrieve required information through
the new program resource functions.
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
(and mark it as DONE in docs/GL3.txt + 10.6.0 relnotes)
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Martin Peres <martin.peres@linux.intel.com>
Patch adds required helper functions to shaderapi.h and
the actual implementation.
The property query functionality can be tested with tests for
following functions that are refactored by later patches:
GetActiveAtomicCounterBufferiv
GetActiveUniformBlockiv
GetActiveUniformsiv
v2: code cleanup (Ilia Mirkin)
add bufSize < 0 check and error out
fix is_resource_referenced to return bool
check for propCount and bufSize, fixes in buffer_prop
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Martin Peres <martin.peres@linux.intel.com>
Patch adds required helper functions to shaderapi.h and
the actual implementation.
The added functionality can be tested by tests for following
functions that are refactored by later patches:
GetFragDataIndex
v2: return -1 if output not referenced by fragment stage
(Ilia Mirkin)
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Martin Peres <martin.peres@linux.intel.com>
Patch adds required helper functions to shaderapi.h and
the actual implementation.
corresponding Piglit test:
arb_program_interface_query-resource-location
The added functionality can be tested by tests for following
functions that are refactored by later patches:
GetAttribLocation
GetUniformLocation
GetFragDataLocation
v2: code cleanup, changes to array element
syntax checking (Ilia Mirkin)
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Martin Peres <martin.peres@linux.intel.com>
Patch adds required helper functions to shaderapi.h and
the actual implementation.
Name generation copied from '_mesa_get_uniform_name' which can
be removed later by refactoring functions to use resource list.
The added functionality can be tested by tests for following
functions that are refactored by later patches:
GetActiveUniformName
GetActiveUniformBlockName
v2: no index for geometry shader inputs (Ilia Mirkin)
add bufSize < 0 check and error out
validate enum
corresponding Piglit test:
arb_program_interface_query-getprogramresourcename
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Martin Peres <martin.peres@linux.intel.org>
Patch adds required helper functions to shaderapi.h and
the actual implementation.
v2: code cleanup (Ilia Mirkin)
corresponding Piglit test:
arb_program_interface_query-getprogramresourceindex
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Martin Peres <martin.peres@linux.intel.org>
Patch adds required helper functions to shaderapi.h and
the actual implementation.
v2: code cleanup (Ilia Mirkin)
fix array size fo xfb varyings
validate programInterface and throw error
v3: put GL_MAX_NUM_COMPATIBLE_SUBROUTINES where
it belongs
corresponding Piglit test:
arb_program_interface_query-getprograminterfaceiv
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Martin Peres <martin.peres@linux.intel.com>
Patch adds ProgramResourceList to gl_shader_program structure.
List contains references to active program resources and is
constructed during linking phase.
This list will be used by follow-up patches to implement hooks
for GL_ARB_program_interface_query. It can be also used to
implement any of the older shader program query APIs.
v2: code cleanups + note for SSBO and subroutines (Ilia Mirkin)
v3: code cleanups + assert(MESA_SHADER_STAGES < 8) (Martin Peres)
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Martin Peres <martin.peres@linux.intel.com>
v2: update dispatch_sanity test (Jason Ekstrand)
+ small code cleanups
v3: xml and Makefile fixes (Ilia Mirkin, Matt Turner)
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Martin Peres <martin.peres@linux.intel.com>
Previously linker did not take in to account case where one would
have only gs and fs (with SSO), patch adds the case by refactoring
code around assign_varying_locations. This makes sure locations for
gs get populated correctly.
This was found with some of the SSO subtests of Martin's upcoming
GetProgramInterfaceiv Piglit test which passes with the patch, no
Piglit regressions.
v2: code cleanups (Martin Peres)
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Martin Peres <martin.peres@linux.intel.com>
Previously GLX_EXT_create_context_es2_profile was marked as "direct
only" so that it would not depend on server support. Since the
extension required functions that are part of
GLX_ARB_create_context_profile, support for the EXT was disabled if the
ARB was not supported.
This was complete rubbish. If the server supported the ARB but not the
EXT, sending a request with GLX_CONTEXT_ES2_PROFILE_BIT_EXT would result
in GLXBadProfileARB.
Instead of the misguided hack, make GLX_EXT_create_context_es2_profile
properly depend on server support by not marking it as "direct only."
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Acked-by: José Fonseca <jfonseca@vmware.com>
Reviewed-by: Chad Versace <chad.versace@intel.com>
Cc: Emil Velikov <emil.l.velikov@gmail.com>
We could potentially support the right combination of 8888 to 565, but the
important thing for now is to not mix up our orderings of 8888. Fixes
fbo-copyteximage regressions.
Now, if we set MESA_LOG_FILE and MESA_GLSL=dump, all the shader info
will get logged to the named file instead of stderr.
Reviewed-by: José Fonseca <jfonseca@vmware.com>
_mesa_log() simply writes log information to stderr or MESA_LOG_FILE.
_mesa_get_log_file() returns the file handle to use for logging.
This will be used for shader dumping/logging instead of always printing
to stderr.
Reviewed-by: José Fonseca <jfonseca@vmware.com>