This add clipdistance support like the non-llvm draw paths,
if we have a clip distance we compare with it instead of doing
the dot4.
We also have to put the have_clipvertex bit into the emitted
vertex header.
Fixes vs-clip-distance-all-planes-enabled, vs-clip-distance-const-reject,
vs-clip-distance-enables, vs-clip-distance-implicitly-sized,
vs-clip-distance-in-param, vs-clip-distance-uint-index.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
This fixes the rest of the piglit clipvertex tests.
v2: fixup comments.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
We incorrectly setup clipmask for gl_ClipVertex, this fixes the clipmask
setup.
v2: fix comment
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
fix comment
This is just a simple text file containing a list of goals for gallivm/llvmpipe
and some info on what is required to get there along with some info on who
is looking at things.
v2: add EXT_texture_array.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
_mesa_max_texture_levels() is also used to test valid texture target
in _mesa_GetTexLevelParameteriv(). GL_TEXTURE_CUBE_MAP is not allowed
as texture target in glGetTexLevelParameter(). So, this should throw
GL_INVALID_ENUM error.
Few other functions which use _mesa_max_texture_levels() like
getcompressedteximage_error_check() and getteximage_error_check()
also don't accept GL_TEXTURE_CUBE_MAP.
Above fix makes piglit fbo-cubemap test to fail. This is because of
incorrect texture target passed to _mesa_max_texture_levels() in
framebuffer_texture(). Fixing that as well
Note: This is a candidate for the stable branches
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
"Use -no-undefined to assure libtool that the library has no
unresolved symbols at link time, so that libtool will build a shared
library on platforms require that all symbols are resolved when the
library is linked."
If I had a dollar for every time I wrote this patch, I'd have about
$10 :-)
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Acked-by: Kenneth Graunke <kenneth@whitecape.org>
There's even a comment in the code containing the right swizzling
computations!
Previously this has not been noticed because we need to manually
enabled swizzling on snb/ivb (kernel 3.4 will do that) and we
don't use the separate stencil on ilk (where the bios enables
swizzling). This fixes
piglit ./bin/fbo-stencil readpixels GL_DEPTH32F_STENCIL8 -auto
on recent drm-intel-next kernels.
Also remove the comment about ivb, it's stale now.
Swizzling detection is done by allocating a temporary x-tiled
buffer object. Unfortunately kernels before v3.2 lie on snb/ivb
because they claim that swizzling is enable, but it isn't. The
kernel commit that fixes this for backport to pre-v3.2 is
commit acc83eb5a1e0ae7dbbf89ca2a1a943ade224bb84
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Mon Sep 12 20:49:16 2011 +0200
drm/i915: fix swizzling on gen6+
But if the kernel doesn't lie, this now works on swizzling and
not swizzling machines.
NOTE: This is a candidate for the 8.0 branch.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
That is when building with --disable-opengl.
Fix for commit cb045880b1.
CC: Paul Berry <stereotype441@gmail.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
That is when building with --disable-opengl.
Fix for commit c5f4024a79.
CC: Chad Versace <chad@chad-versace.us>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
This replaces the previously used wl_display_destroy.
wl_display_destroy was povided by wayland-client.so and
wayland-server.so, to resolve that conflict its renamed client-side.
Otherwise streamout with rasterizer discard will make the kernel upset
if the state tracker doesn't set a depth-stencil-alpha state.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Unused by the current stack and APIs, therefore untestable.
It was used to facilitate the transition to integers.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Eventually I'd like to make every format blittable, so that the function
can go away.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
For polygons, we have been using face culling with success, but that doesn't
work for points and lines.
Setting the point size and line width to 0 fixes it.
Also improve it even more by setting SCREEN_SCISSOR to a zero area.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Implement it right using STRMOUT_CONFIG.RAST_STREAM. This fixes rasterizer
discard with points and lines.
This also adds another derived state. It's a combination of rasterizer discard
and streamout enable.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
We only need one scissor for the framebuffer.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
We must use VPORT_SCISSOR, because that's the only one we can use for multiple
scissor rectangles in ARB_viewport_array.
R700 can use the VPORT_SCISSOR_ENABLE bit, but R600 doesn't have that and must
emit a 8192x8192 rectangle if scissor is disabled.
This commit also cleanups magic numbers in create_rs_state.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
VPORT_SCISSOR is the OpenGL scissor. How do I know? Because there are
16 of them just like GL4.1 has multiple scissor rectangles.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Also use XXX in the other ones, because it's the most used word for that
purpose in Mesa.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Timer queries should be able to measure the time spent in u_blitter as well.
Queries are split into two groups: the timer ones and the others (streamout,
occlusion), because we should only suspend non-timer queries for u_blitter,
and later if the non-timer queries are suspended, the context flush should
only suspend and resume the timer queries.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
This fixes a memory leak introduced with the rework.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
And rename or inline functions where appropriate.
There is no reason to keep this stuff in r600_hw_context.c.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
The current code would ignore the point size specified by gl_PointSize
builtin variable in vertex shader on Pineview. This patch servers as
fixing that.
This patch fixes the following issues on Pineview:
webglc: https://cvs.khronos.org/svn/repos/registry/trunk/public/webgl/sdk/tests/conformance/rendering/point-size.html
piglit: glsl-vs-point-size
NOTE: This is a candidate for stable release branches.
v2: pick Eric's nice tip for fixing this issue in hardware rendering.
v3: the last arg of EMIT_ATTR specify the size in _byte_. (Eric)
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
We may specify the point size in a glsl vertex shader.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=46311
piglit: glsl-vs-point-size
NOTE: This is a candidate for stable release branches.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
This fixes the egl_gallium.so driver build when no system libEGL.so is
present, since it's relying on the lib/ to build against until it gets
converted to automake.
We were looking at the size of batch.map for how big the batchbuffer
was, but on 865 we just use a single-page batchbuffer due to hardware
limits.
v2: Removed check for sizeof map < bo->size, since that's always false.
[change by anholt]
NOTE: This is a candidate for release branches.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=41495
In order to prevent an overflow of the batch buffer when emitting
triangles, we need to limit the initial primitive to fit within the
current batch. To do we need to measure the remaining space and thence
compute the maximum number of vertices that fit into that space.
Reported-by: Kurt Roeckx <kurt@roeckx.be>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=41495
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Eric Anholt <eric@anholt.net>
NOTE: This is a candidate for release branches.
The hardware, like i915, uses an inclusive bounds on min and max for
the drawing rectangle, but we were providing a number for exclusive.
The number of bits used by the hardware only covers this value going
up to the maximum size, so when we programmed 2048 as the maximum
inclusive X, it saw a maximum X of 0 and clipped all rendering. This
caused rendering failures in gnome-shell.
Fixes piglit fbo-maxsize.
v2: dropped changes to the blitter, which does use an exclusive x2, y2.
[change by anholt]
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=45558
Reviewed-by: Eric Anholt <eric@anholt.net>
NOTE: This is a candidate for release branches.
Dave Airlie
Anuj Phogat
Jon TURNEY
Daniel Vetter
Benjamin Franzke
Roland Scheidegger
Christian König
Marek Olšák
Yuanhan Liu
Tom Stellard
Eric Anholt
Kurt Roeckx
Chris Wilson
Alban Browaeys