Commit 968ffd6c86 stored the last subpass
index of all the attachments but that of the depth-stencil attachment.
This could cause depth buffers used in multiple subpasses not to be in
the requested final layout. Fix this error.
Cc: "17.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Signed-off-by: Nanley Chery <nanley.g.chery@intel.com>
Make the cap consistent with PIPE_CAP_INT64.
Aside from the hypothetical case of using draw for vertex shaders (and
actually caring about doubles...), every implementation supports doubles
either nowhere or everywhere.
Also, st/mesa didn't even check the cap correctly in all supported
shader stages.
While at it, add a missing LLVM version check for 64-bit integers in
radeonsi. This is conservative: judging by the log, LLVM 3.8 might be
sufficient, but there are probably bugs that have been fixed since then.
v2: fix clover (Marek)
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Since we already have the functionality in place and games
like Game of Thrones seem to depend on this extension, I
think it makes sense to enable it by making it part of
the extension string even though it's still a draft:
https://www.khronos.org/registry/gles/extensions/EXT/EXT_compressed_ETC1_RGB8_sub_texture.txt
Note: OES_compressed_ETC1_RGB8_sub_texture seems to be listed
in gl2ext.h, but there's no documentation for it in the KHR
registry
Signed-off-by: Plamena Manolova <plamena.manolova@intel.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
v2: use define for buffer ID (Jason)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Up to now on Gen8+ we only allocated a vertex element for
gl_InstanceIndex or gl_VertexIndex when a vertex shader uses
gl_BaseInstanceARB or gl_BaseVertexARB. This is because we would
configure the VF_SGVS packet to make the VF unit write the
gl_InstanceIndex & gl_VertexIndex values right behind the values
computed from the vertex buffers.
In the next commit we will also write the gl_DrawIDARB value. Our
backend expects to pull the gl_DrawIDARB value from the element
following the element containing gl_InstanceIndex, gl_VertexIndex,
gl_BaseInstanceARB and gl_BaseVertexARB (see
vec4_vs_visitor::setup_attributes). Therefore we need to allocate an
element for the SGVS elements as long as at least one of the SGVS
element is read by the shader. Otherwise our shader will use a
gl_DrawIDARB value pulled from the URB one element too far (most
likely garbage).
v2: Fix my english (Lionel)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
v2: use define for buffer ID (Jason)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
These changes set the correct llvm version and elf include path
which differ for Marshmallow and Nougat
Cc: "17.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
For RGB formats in Vulkan, we use the corresponding RGBA format with a
swizzle of RGB1. While this swizzle is exactly what we want for
texturing, it's not allowed for rendering according to the docs. While
we haven't been getting hangs or anything, we should probably obey the
docs. This commit just sanitizes all render swizzles so that the alpha
channel maps to ALPHA.
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
The CTS tests at least are using this, and we were totally
ignoring it.
This hopefully fixes the bouncing multisample CTS tests.
v2: get family mask in ignored case from command buffer.
v3: only change things in one place, use logic from Bas.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Otherwise we were writing these as 4 components, and things went bad.
Fixes (the remaining):
dEQP-VK.clipping.user_defined.*.vert_geom.*
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This fixes clip distance fetches as they are single item loads
with a const_index like float[1].
Fixes:
dEQP-VK.clipping.user_defined.*.vert_geom.[0-6]
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This code should be used in radv, so move it to a shared location
in advance of doing that.
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
In the past I've gotten this function confused with the one in
ir_to_mesa.cpp of the same name. Now that the affected flag setting
has move into a helper it makes sense just to inline this remaining
code.
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
This will be used when restoring tgsi from the on-disk shader
cache.
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Add assert checking that num_sources is never larger than 3.
This prevents Coverity from concluding that the unhandled
cases of num_sources not being 0-3 are relevant.
Coverity-Id: 1399480-1399489
Signed-off-by: Robert Foss <robert.foss@collabora.com>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
The kernel driver reports correct values now.
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
fixes to issues spotted by Emil Velikov:
- set ANV_TIMESTAMP corretly
- fix typo with VULKAN_GEM_FILES
v2: update to use Makefile.sources under vulkan
instead of having own
v3: update to changes to generate from vk.xml
(commit c7fc310)
v4: remove 'hw' relative path
cleanups, remove unnecessary cruft
review from Emil Velikov:
- move to vulkan folder
- remove timestamp gen, no longer necessary
- more cleanups
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
All the other calls to retrieve the attachment have been covered except
this one - return the proper error for attachment points that are valid
enums but out of bound for the driver.
Fixes GL45-CTS.geometry_shader.layered_fbo.fb_texture_invalid_attachment
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
It is not clear from the docs exactly how pipelined STATE_BASE_ADDRESS
actually is. We know from experimentation that we need to flush the
render cache prior to emitting STATE_BASE_ADDRESS and invalidate the
texture cache afterwards. The only thing the PRM says is that, on gen8+
we're supposed to invalidate the state cache after STATE_BASE_ADDRESS
but experimentation has indicated that doing so does nothing whatsoever.
Since we don't really know, let's do just a bit more flushing in the
hopes that this won't be a problem again. In particular:
1) Do a CS stall before we emit STATE_BASE_ADDRESS since we don't
really know whether or not it's pipelined.
2) Do a data cache flush in case what runs before STATE_BASE_ADDRESS
is a compute shader.
3) Invalidate the state and constant caches after STATE_BASE_ADDRESS
because the state may be getting cached there (we don't really know).
Reported-by: Mark Janes <mark.a.janes@intel.com>
Tested-by: Mark Janes <mark.a.janes@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Cc: "13.0 17.0" <mesa-stable@lists.freedesktop.org>
We had no good reason for *not* doing this on gen7 before but we didn't
know it was needed. Recently, when trying update to Vulkan CTS version
1.0.2 in our CI system, Mark discovered GPU hangs on Haswell that appear
to be STATE_BASE_ADDRESS related. This commit fixes them.
Reported-by: Mark Janes <mark.a.janes@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Cc: "13.0 17.0" <mesa-stable@lists.freedesktop.org>
This causes hangs on Broadwell if you try to render to it. I have no
idea how we managed to not hit this earlier.
Tested-by: Mark Janes <mark.a.janes@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Cc: "13.0 17.0" <mesa-stable@lists.freedesktop.org>
No f16 support as I'm not quite sure about alignment yet.
Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
The addition of Neon assembly breaks on arm64 builds because the assembly
syntax is different. For now, restrict Neon to ARMv7 builds.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Nanley Chery
Nicolai Hähnle
Plamena Manolova
Vinson Lee
Lionel Landwerlin
Mauro Rossi
Jason Ekstrand
Micah Fedke
Dave Airlie
Timothy Arceri
Boyuan Zhang
Bas Nieuwenhuizen
Robert Foss
Emil Velikov
Michel Dänzer
Tapani Pälli
Ilia Mirkin
Tom Stellard
Rob Herring