Provide a dummy stub when the user has opted w/o said platform, thus
we can build the binaries without unnecessarily requiring X11/other
headers.
In order to avoid build and link-time issues, we remove the HAVE_DRI3
guards in the VA and VDPAU state-trackers.
With this change st/va will return VA_STATUS_ERROR_ALLOCATION_FAILED
instead of VA_STATUS_ERROR_UNIMPLEMENTED. That is fine since upstream
users of libva such as vlc and mpv do little error checking, let
alone distinguish between the two.
Cc: Leo Liu <leo.liu@amd.com>
Cc: Guttula, Suresh <Suresh.Guttula@amd.com>
Cc: mesa-stable@lists.freedesktop.org
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Vulkan supports only DRI3 enabled X11 platforms. Make it obvious,
should one consider building without it.
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Pretty much every other place does the same.
Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Currently we are having the XCB_DRI3 dependencies duplicated,
partially.
Just do a once-off check and add all of the respective CFLAGS/LIBS
where needed.
As a nice side effect this helps us solve a couple of FIXMEs.
DRI3 is not a thing w/o X11 so disable it in such cases.
Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Building EGL/Vulkan/other without X11, while GLX is enabled is confusing
and misleading. In practise anyone aiming at the former will also
disable GLX.
The inverse (some examples below) should still work:
./configure --disable-glx --with-platforms=x11 --with-vulkan-drivers=intel
./configure --disable-glx --with-platforms=x11 --enable-egl
Keep in mind that the X11 platform is enabled, by default.
Cc: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Rather than having multiple places that define the macros, do it just
once in configure. Makes existing code a bit shorter and easier to
manage as we fix the VL targets with follow-up commits.
Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
A simple platform that you want to use in a many usecases. See the
spec file details.
It has no special requirements plus it takes less than a second to
build.
Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Acked-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Remove the enable-egl pre-requirement. Platform selection does not
depend on EGL.
Cc: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Rename the remaining references to omit the egl part.
Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Analogous to others earlier, these will be used to control the platform
for more than the EGL driver.
Cc: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
We'll need it for the Vulkan drivers and the VL targets.
Cc: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
There's still an error after my recent clean-up if LLVM is not patched to
enable AMDGPU target:
external/mesa3d/src/amd/common/ac_llvm_util.c:38:2: error: implicit declaration of function 'LLVMInitializeAMDGPUTargetInfo' is invalid in C99 [-Werror,-Wimplicit-function-declaration]
LLVMInitializeAMDGPUTargetInfo();
^
external/mesa3d/src/amd/common/ac_llvm_util.c:39:2: error: implicit declaration of function 'LLVMInitializeAMDGPUTarget' is invalid in C99 [-Werror,-Wimplicit-function-declaration]
LLVMInitializeAMDGPUTarget();
^
external/mesa3d/src/amd/common/ac_llvm_util.c:40:2: error: implicit declaration of function 'LLVMInitializeAMDGPUTargetMC' is invalid in C99 [-Werror,-Wimplicit-function-declaration]
LLVMInitializeAMDGPUTargetMC();
^
external/mesa3d/src/amd/common/ac_llvm_util.c:41:2: error: implicit declaration of function 'LLVMInitializeAMDGPUAsmPrinter' is invalid in C99 [-Werror,-Wimplicit-function-declaration]
LLVMInitializeAMDGPUAsmPrinter();
^
We need to drop libmesa_amd_common when LLVM is disabled, however there's
still a dependency on include paths for ac_binary.h. So explicitly add the
include path when LLVM is disabled.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Commit 3dfe61ed6e ("gallium: decrease the size of pipe_box - 24 -> 16
bytes") changed the size of pipe_box, but the virgl code was relying on
pipe_box and drm_virtgpu_3d_box structs having the same size/layout doing
a struct copy. Copy the fields one by one instead.
Cc: Marek Olšák <marek.olsak@amd.com>
Cc: Dave Airlie <airlied@redhat.com>
Fixes: 3dfe61ed6e ("gallium: decrease the size of pipe_box - 24 -> 16 bytes")
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Function droid_swap_buffers may get called without dri2_surf->buffer set,
in these cases we don't have a back buffer set either. Patch fixes segfault
seen with 3DMark that uses android.opengl.GLSurfaceView for rendering it's UI.
backtrace:
#00 pc 00013f88 /system/lib/egl/libGLES_mesa.so (droid_swap_buffers+104)
#01 pc 000117b2 /system/lib/egl/libGLES_mesa.so (dri2_swap_buffers+50)
#02 pc 000058b2 /system/lib/egl/libGLES_mesa.so (eglSwapBuffers+386)
#03 pc 00011329 /system/lib/libEGL.so (eglSwapBuffersWithDamageKHR+553)
#04 pc 000118e7 /system/lib/libEGL.so (eglSwapBuffers+55)
#05 pc 000754dc /system/lib/libandroid_runtime.so
Note, this is v1 as v2 caused dEQP regressions.
Fixes: 2acc69d ("EGL/Android: Add EGL_EXT_buffer_age extension")
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
Cc: "17.1" <mesa-stable@lists.freedesktop.org>
Commit 9ca6711faa changed the Wayland winsys to only block for the
frame callback inside SwapBuffers, rather than get_back_bo. get_back_bo
would perform a single non-blocking Wayland event dispatch, to try to
find any release events which we had pulled off the wire but not
actually processed. The blocking dispatch was moved to SwapBuffers.
This removed a guarantee that we would've processed all events inside
get_back_bo(), and introduced a failure whereby the server could've sent
a buffer release event, but we wouldn't have read it. In clients
unconstrained by SwapInterval (rendering ~as fast as possible), which
were being displayed directly without composition (buffer release delayed),
this could lead to get_back_bo() failing because there were no free
buffers available to it.
The drawing rightly failed, but this was papered over because of the
path in eglSwapBuffers() which attempts to guarantee a BO, in order to
support calling SwapBuffers twice in a row with no rendering actually
having been performed.
Since eglSwapBuffers will perform a blocking dispatch of Wayland
events, a buffer release would have arrived by that point, and we
could then choose a buffer to post to the server. The effect was that
frames were displayed out-of-order, since we grabbed a frame with random
past content to display to the compositor.
Ideally get_back_bo() failing should store a failure flag inside the
surface and cause the next SwapBuffers to fail, but for the meantime,
restore the correct behaviour such that get_back_bo() no longer fails.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reported-by: Eero Tamminen <eero.t.tamminen@intel.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98833
Fixes: 9ca6711faa ("Revert "wayland: Block for the frame callback in get_back_bo not dri2_swap_buffers"")
During display initialisation, we need a separate event queue to handle
the registry events, which is correctly handled. But we also need
separate per-surface event queues to handle swapchain-related events,
such as surface frame events and buffer release events. This avoids two
surfaces from the same EGLDisplay, both current on separate threads,
dispatching each other's events.
Create separate per-surface event queues, create wl_surface and wl_drm
proxy wrapper objects per surface, so we eliminate the race around
sending events to the wrong queue. swrast buffers do not need a
dedicated proxy wrapper, as the wl_shm_pool used to create the
wl_buffers, being transient, can itself be assigned to a queue.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: 36b9976e1f ("egl/wayland: Avoid race conditions when on non-main thread")
Cc: mesa-stable@lists.freedesktop.org
wl_display_roundtrip_queue() exists and can replace roundtrip(). The
API was introduced with wayland 1.6, while we currently require 1.11.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: mesa-stable@lists.freedesktop.org
Though most swapchain operations used a queue, they were racy in that
the object was created with the queue only set later, meaning that its
event could potentially be dispatched from the default queue in between
these two steps.
Use proxy wrappers to avoid this race, also assigning wl_buffers created
for the swapchain to the event queue.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: mesa-stable@lists.freedesktop.org
Calling random callbacks on the display's event queue is hostile, as
we may call into client code when it least expects it. Create our own
event queue, one per wsi_wl_display, and use that for the registry.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: mesa-stable@lists.freedesktop.org
There's no need to call wl_display_roundtrip() after trying to create a
buffer through wl_drm; if it succeeds then everything is fine, and if it
fails, then we get a fatal protocol error so can't recover anyway.
Additionally, doing a roundtrip on the default / main application queue,
is destructive anyway, so would need to be its own queue.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: mesa-stable@lists.freedesktop.org
Untangle the exit cleanup paths so we don't try to use the registry
variable before it's been initialised.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: mesa-stable@lists.freedesktop.org
The procedure for decompressing an opaque DXT1 OpenGL format is
dependant on the comparison of two colors stored in the first 32 bits of
the compressed block. Here's the specified OpenGL behavior for
reference:
The RGB color for a texel at location (x,y) in the block is given by:
RGB0, if color0 > color1 and code(x,y) == 0
RGB1, if color0 > color1 and code(x,y) == 1
(2*RGB0+RGB1)/3, if color0 > color1 and code(x,y) == 2
(RGB0+2*RGB1)/3, if color0 > color1 and code(x,y) == 3
RGB0, if color0 <= color1 and code(x,y) == 0
RGB1, if color0 <= color1 and code(x,y) == 1
(RGB0+RGB1)/2, if color0 <= color1 and code(x,y) == 2
BLACK, if color0 <= color1 and code(x,y) == 3
The sampling operation performed on an opaque DXT1 Intel format essentially
hard-codes the comparison result of the two colors as color0 > color1.
This means that the behavior is incompatible with OpenGL. This is stated
in the SKL PRM, Vol 5: Memory Views:
Opaque Textures (DXT1_RGB)
Texture format DXT1_RGB is identical to DXT1, with the exception that the
One-bit Alpha encoding is removed. Color 0 and Color 1 are not compared, and
the resulting texel color is derived strictly from the Opaque Color Encoding.
The alpha channel defaults to 1.0.
Programming Note
Context: Opaque Textures (DXT1_RGB)
The behavior of this format is not compliant with the OGL spec.
The opaque and non-opaque DXT1 OpenGL formats are specified to be
decoded in exactly the same way except the BLACK value must have a
transparent alpha channel in the latter. Use the four-channel BC1 Intel
formats with the alpha set to 1 to provide the behavior required by the
spec. Note that the alpha is already set to 1 for RGB formats in
brw_get_texture_swizzle().
v2: Provide a more detailed commit message (Kenneth Graunke).
v3: Ensure the alpha channel is set to 1 for DXT1 formats.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100925
Cc: <mesa-stable@lists.freedesktop.org>
Acked-by: Tapani Pälli <tapani.palli@intel.com> (v1)
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Nanley Chery <nanley.g.chery@intel.com>
The procedure for decompressing an opaque BC1 Vulkan format is dependant on the
comparison of two colors stored in the first 32 bits of the compressed block.
Here's the specified OpenGL (and Vulkan) behavior for reference:
The RGB color for a texel at location (x,y) in the block is given by:
RGB0, if color0 > color1 and code(x,y) == 0
RGB1, if color0 > color1 and code(x,y) == 1
(2*RGB0+RGB1)/3, if color0 > color1 and code(x,y) == 2
(RGB0+2*RGB1)/3, if color0 > color1 and code(x,y) == 3
RGB0, if color0 <= color1 and code(x,y) == 0
RGB1, if color0 <= color1 and code(x,y) == 1
(RGB0+RGB1)/2, if color0 <= color1 and code(x,y) == 2
BLACK, if color0 <= color1 and code(x,y) == 3
The sampling operation performed on an opaque DXT1 Intel format essentially
hard-codes the comparison result of the two colors as color0 > color1. This
means that the behavior is incompatible with OpenGL and Vulkan. This is stated
in the SKL PRM, Vol 5: Memory Views:
Opaque Textures (DXT1_RGB)
Texture format DXT1_RGB is identical to DXT1, with the exception that the
One-bit Alpha encoding is removed. Color 0 and Color 1 are not compared, and
the resulting texel color is derived strictly from the Opaque Color Encoding.
The alpha channel defaults to 1.0.
Programming Note
Context: Opaque Textures (DXT1_RGB)
The behavior of this format is not compliant with the OGL spec.
The opaque and non-opaque BC1 Vulkan formats are specified to be decoded in
exactly the same way except the BLACK value must have a transparent alpha
channel in the latter. Use the four-channel BC1 Intel formats with the alpha
set to 1 to provide the behavior required by the spec.
v2 (Kenneth Graunke):
- Provide a more detailed commit message.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100925
Cc: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Nanley Chery <nanley.g.chery@intel.com>
This is mostly for running in our CI system to prevent dEQP from
continuing on to the next test if we get a GPU hang. As it currently
stands, dEQP uses the same VkDevice for almost all tests and if one of
the tests hangs, we set the anv_device::device_lost flag and report
VK_ERROR_DEVICE_LOST for all queue operations from that point forward
without sending anything to the GPU. dEQP will happily continue trying
to run tests and reporting failures until it eventually gets crash that
forces the test runner to start over. This circumvents the problem by
just aborting the process if we ever get a GPU hang. Since this is not
the recommended behavior most of the time, we hide it behind an
environment variable.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
We weren't wrapping this before because anv_cmd_buffer_execbuf may throw
a more meaningful error message. However, we do change the error code
into VK_ERROR_DEVICE_LOST, so we should print a new message.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
On GFX9 with only 4K CE RAM, define the range of slots that will be
allocated in CE RAM. All other slots will be uploaded directly. This will
switch dynamically according to which slots are used by current shaders.
GFX9 CE usage should now be similar to VI instead of being often disabled.
Tested on VI by taking the GFX9 CE allocation codepath and setting
num_ce_slots = 2 everywhere to get frequent switches between both modes.
CE is still disabled on GFX9.
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
A later commit will only upload descriptors used by shaders, so we won't do
full dumps anymore, so the only way to have a complete mirror of CE RAM
in memory is to do a separate dump after the last draw call.
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
All updates of descriptors_dirty also set dirty_mask, so the return is
unnecessary. The next commit will want this function to be executed
even if dirty_mask == 0.
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Sampler slots: slot[8], .. slot[39] (ascending)
Image slots: slot[7], .. slot[0] (descending)
Each image occupies 1/2 of each slot, so there are 16 images in total,
therefore the layout is: slot[15], .. slot[0]. (in 1/2 slot increments)
Updating image slot 2n+i (i <= 1) also dirties and re-uploads slot 2n+!i.
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Constant buffers: slot[16], .. slot[31] (ascending)
Shader buffers: slot[15], .. slot[0] (descending)
The idea is that if we have 4 constant buffers and 2 shader buffers, we only
have to upload 6 slots. That optimization is left for a later commit.
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Only the first array element was declared, so tgsi_shader_info::
shader_buffers_declared didn't match what the shader was using.
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
This will also magically fix this special lowering for
bindless samplers.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
RadeonSI needs to do a special lowering for Gather4 with integer
formats, but with bindless samplers we just can't access the index.
Instead, store the return type in the instruction like the target.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
The datalayout for modules was purposely not being set in order to work around
the fact that the ExecutionEngine requires that the module's datalayout
matches the datalayout of the TargetMachine that the ExecutionEngine is
using.
When the pass manager runs on a module with no datalayout, it uses
the default datalayout which is little-endian. This causes problems
on big-endian targets, because some optimizations that are legal on
little-endian or illegal on big-endian.
To resolve this, we set the datalayout prior to running the pass
manager, and then clear it before creating the ExectionEngine.
This patch fixes a lot of piglit tests on big-endian ppc64.
Cc: mesa-stable@lists.freedesktop.org
Fixes regressions in Android CtsVerifier.apk on Intel Chrome OS devices
due to incorrect error handling in eglMakeCurrent. See below on how to
confirm the regression is fixed.
This partially reverts
commit 23c86c74cc
Author: Chad Versace <chadversary@chromium.org>
Subject: egl: Emit error when EGLSurface is lost
The problem with commit 23c86c74 is that, once an EGLSurface became
lost, the app could never unbind the bad surface. Each attempt to unbind
the bad surface with eglMakeCurrent failed with EGL_BAD_CURRENT_SURFACE.
Specificaly, the bad commit added the error handling below. #2 and #3
were right, but #1 was wrong.
1. eglMakeCurrent emits EGL_BAD_CURRENT_SURFACE if the calling
thread has unflushed commands and either previous surface is no
longer valid.
2. eglMakeCurrent emits EGL_BAD_NATIVE_WINDOW if either new surface
is no longer valid.
3. eglSwapBuffers emits EGL_BAD_NATIVE_WINDOW if the swapped surface
is no longer valid.
Whe I wrote the bad commit, I misunderstood the EGL spec language
for #1. The correct behavior is, if I understand correctly now, is
below. This patch doesn't implement the correct behavior, though, it
just reverts the broken behavior.
- Assume a bound EGLSurface is no longer valid.
- Assume the bound EGLContext has unflushed commands.
- The app calls eglMakeCurrent. The spec requires eglMakeCurrent to
implicitly flush. After flushing, eglMakeCurrent emits
EGL_BAD_CURRENT_SURFACE and does *not* alter the thread's
current bindings.
- If the app calls eglMakeCurrent again, and the app inserts no
commands into the GL command stream between the two eglMakeCurrent
calls, then this second eglMakeCurrent succeeds without emitting an
error.
How to confirm this fixes the regression:
Download android-cts-verifier-7.1_r5-linux_x86-x86.zip from
source.android.com, unpack, and `adb install CtsVerifier.apk`.
Run test "Projection Cube". Click the Pass button (a
green checkmark). Then run test "Projection Widget". Confirm that
widgets are visible and that logcat does not complain about
eglMakeCurrent failure.
Then confirm there are no regressions in the cts-traded module that
commit 263243b1 fixed:
cts-tf > run cts --skip-preconditions --skip-device-info \
-m CtsCameraTestCases \
-t android.hardware.camera2.cts.RobustnessTest
Tested with Chrome OS board "reef".
Fixes: 23c86c74 (egl: Emit error when EGLSurface is lost)
Acked-by: Tapani Pälli <tapani.palli@intel.com>
Cc: "17.1" <mesa-stable@lists.freedesktop.org>
Cc: Tomasz Figa <tfiga@chromium.org>
Cc: Nicolas Boichat <drinkcat@chromium.org>
Cc: Emil Velikov <emil.velikov@collabora.com>
According to the VK_KHX_multiview spec:
"Multiview causes all drawing and clear commands in the subpass to
behave as if they were broadcast to each view, where each view is
represented by one layer of the framebuffer attachments."
This adds support for multiview clears, which were missing in the
initial implementation.
v2 (Jason):
- split multiview from regular case
- Use for_each_bit() macro
Fixes new CTS multiview tests:
dEQP-VK.multiview.clear_attachments.*
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Emil Velikov
Emil Velikov
Rob Herring
Tapani Pälli
Daniel Stone
Nanley Chery
Jason Ekstrand
Jason Ekstrand
Marek Olšák
Samuel Pitoiset
Tom Stellard
Chad Versace
Iago Toral Quiroga
Nicolai Hähnle