RADV_PERFTEST=aco no longer exists, ACO is the default compiler.
RADV_PERFTEST=llvm is deprecated, use RADV_DEBUG=llvm instead.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5662>
This should do much more trimming than shrink_load, and is a win on i965's
vec4 and nir-to-tgsi. For scalar backends like this that don't need ALU
shrinking, it still gets more load intrinsics covered.
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6050>
Header is defined at vkGetPipelineCacheData spec, in any vulkan
version, and anv, tu and radv were using the same struct, and v3dv was
about to do the same.
Defining the same struct four times seemed odd, so let's define on a
common place.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Acked-by: Jonathan Marek <jonathan@marek.ca>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6058>
We've hand-rolled this loop 10 places and those are just the ones I
found easily.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5966>
Lower them to ACCESS_COHERENT to simplify the backend and
probably give better performance than invalidating or writing back the
entire L0/L1 cache.
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4905>
Just noticed in passing that this looked extra complicated,
Bas said it was for legacy design reasons, so clean it up.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6099>
There might still be tex instructions with undef texture/sampler before
the first round of optimizations. No pipelinedb changes.
Fixes: 14a12b771d ('spirv: Rework our handling of images and samplers')
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6083>
Fixes some dEQP-VK.renderpass2.* flakes. Valgrind:
Test case 'dEQP-VK.renderpass2.dedicated_allocation.attachment.8.724'..
==754520== Conditional jump or move depends on uninitialised value(s)
==754520== at 0x575B21C: radv_layout_is_htile_compressed (radv_image.c:1690)
==754520== by 0x572F470: radv_handle_depth_image_transition (radv_cmd_buffer.c:5855)
==754520== by 0x572F2F2: radv_handle_image_transition (radv_cmd_buffer.c:6123)
==754520== by 0x572EEC6: radv_handle_subpass_image_transition (radv_cmd_buffer.c:3385)
==754520== by 0x572A104: radv_cmd_buffer_begin_subpass (radv_cmd_buffer.c:4843)
==754520== by 0x572A007: radv_CmdBeginRenderPass (radv_cmd_buffer.c:4913)
==754520== by 0x572A197: radv_CmdBeginRenderPass2 (radv_cmd_buffer.c:4921)
Why false?
A renderloop happens when the same attachment is both used as input
attachment and output (color, ds) attachment in a subpass. Of course
this doesn't happen outside of a renderpass and hence we can initialize
it to false at the start of the renderpass.
Fixes: 66131ceb8b "radv: Pass through render loop detection to internal layout decisions."
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/3074
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6068>
To be able to constify all radv_pipeline_generate_*() helpers.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5837>
For consistency regarding how the graphics pipeline is built.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5837>
While we are at it, remove one useless field in radv_multisample_state.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5837>
We're about to make the SPIR-V -> NIR path generate a bit more complex
SSA chains for certain derefs. This will ensure we don't regress anyone
when we start making vec2's of derefs.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5278>
For cross-process timelines we have to have a thread to wait
till the requested points become available.
The functions actually dealing with timeline semaphores stubbed out, to
implement in the next patch. As such the thread code shouldn't trigger
yet.
The core idea is that we still use the refcount mechanism that we use with
emulated timelines, though the native timeline syncobj don't participate
in the refcounting. This way we keep the ordering of submission in a queue
as each submission is also blocked by its predecessor.
Where we change behavior is when the number of blockers reaches 0. In the
new code we check if we need to wait for the timeline semaphores to
be available and if so we won't execute the submission immediately but
pass it to the submission thread.
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5600>
To facilitate cross-process timeline semaphores we have to deal with
the fact that the syncobj signal operation might be submitted a
small finite time after the wait operation.
For that we start using DRM_SYNCOBJ_WAIT_FLAGS_WAIT_FOR_SUBMIT during
the wait operation so we properly wait instead of returning an error.
Furthermore, to make this effective for syncobjs that get reused we
actually have to reset them after the wait. Otherwise the wait before
submit would get the previous fence instead of waiting for the new
thing to submit.
The obvious choice, resetting the syncobj after the CS submission
has 2 issues though:
1) If the same semaphore is used for wait and signal we can't reset it.
This is solvable by only resetting the semaphores that are not in the
signal list.
2) The submitted work might be complete before we get to resetting the
syncobj. If there is a cycle of submissions that signals it again and
finishes before we get to the reset we are screwed.
Solution:
Copy the fence into a new syncobj and reset the old syncobj before
submission. Yes I know it is more syscalls :( At least I reduced the
alloc/free overhead by keeping a cache of temporary syncobjs.
This also introduces a syncobj_reset_count as we don't want to reset
syncobjs that are part of an emulated timeline semaphore. (yes, if
the kernel supports timeline syncobjs we should use those instead,
but those still need to be implemented and if we depend on them in
this patch ordering dependencies get hard ...)
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5600>
While we are at it, use local variables first to make sure to
not leak memory if something bad happens.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5872>
No hw support for float atomic add for buffer and (sparse) images.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6000>
AMDGPU_GEM_CREATE_CPU_GTT_USWC should be faster when CPU reads
are unexpected (because they aren't cached).
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5978>
Detroit: Become Human uses dFdx/dFdy immediately after a quad-divergent
discard, which can cause the image to become white.
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Cc: <mesa-stable@lists.freedesktop.org>
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/3212
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5991>
When the VRAM size is small and the preferred heap only VRAM,
the kernel tries to always honor the requested heap and it does
a ton of evictions which is a disaster for performance.
On APUs, VRAM and GTT have similar performance, so allow the
kernel to choose the best placement (GTT or VRAM) itself.
This gives a huge performance boost with Doom Eternal on RAVEN.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5665>
AMDGPU_GEM_CREATE_CPU_GTT_USWC should be faster when CPU reads
are unexpected (because they aren't cached).
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5959>
While we are at it, do not duplicate the error messages for the
three different submission paths.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5876>
This creates a syncobj and sets it as signaled with one ioctl
instead of two.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5921>
VK_ERROR_INVALID_EXTERNAL_HANDLE is not a valid Vulkan error code
for these functions and it's likely that too many objects are
created instead.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5921>
It's invalid and the temporary syncobj was never actually destroyed.
Cc: 20.1 <mesa-stable@lists.freedesktop.org>
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5921>
The legacy path requires one more ioctl to create the buffer
list and this is more costly for the CPU.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5899>
The buffer was never added to the list of buffers. This might lead to
VM faults and GPU hangs.
Found this by luck.
Fixes: 57e796a12a ("radv: Implement VK_EXT_custom_border_color")
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5884>
Affects a few shaders in Detroit: Become Human and Doom Eternal.
fossil-db (Navi):
Totals from 9 (0.01% of 135946) affected shaders:
CodeSize: 31188 -> 25096 (-19.53%)
Instrs: 6136 -> 4999 (-18.53%)
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5695>
Out-of-order rasterization is disabled if a pipeline uses an
extended dynamic depth/stencil state because the driver doesn't
support enabling/disabling out-of-order dynamically.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5718>