Promoted to Vulkan 1.2 with the KHR suffix omitted.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Promoted to Vulkan 1.2 with the KHR suffix omitted.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Fixes a hang on Raven with Resident Evil 2.
I did not find anything more restricted to fix it:
- Setting persistent_states_per_bin to 1 fixes it too,
but likely does an internal break on any descriptor set changes
too.
- Only breaking the batch when cb_target_mask changes does not fix
it (and looking at AMDVLK comments, I suspect the code in radeonsi
should really be doing a FLUSH_DFSM).
- Always doing a FLUSH_DFSM on shader switch helps, but that is more
often than this and I don't think we should be doing that when DFSM
is disabled.
- Also emitting the existing break on framebuffer change when DFSM is
disabled does not fix the issue.
Closes: https://gitlab.freedesktop.org/mesa/mesa/issues/2315
CC: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
I don't think this makes much differences and a potential clear
following the initialization will overwrite HTILE anyways.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
PA_SC_AA_CONFIG might be updated when conversative rasterization is
enabled. Because the driver only re-emits the multisample state if
the number of samples is different, that register value might not
be updated correctly.
Found by inspection, doesn't fix anything known.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
They don't have to be updated dynamically.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
No functional changes because the aspect mask is still not used
during image transitions but it will be needed for the separate
depth/stencil aspects logic.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
When the scratch ringbuffer settings are changed, the shader unit has
to be idle or we will have shaders using old and new settings.
That combination is not supported on the HW (likely the offset is
ringbuffer idx * WAVESIZE * 1024).
CC: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
This will allow to change wavesize on-demand.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
On GFX8 the number of records is in bytes while on other chips
it's in units of "stride".
Fixes dEQP-VK.robustness.vertex_access.*.draw.vertex_* on RAVEN.
Tested on GFX6, GFX8, GFX10 and RAVEN.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Fixes some crashes with dEQP-VK.geometry.layered.*.secondary_cmd_buffer
on Raven and other chips that allow rbplus.
This just prevents a crash and rbplus probaby needs more work.
Cc: 19.2 <mesa-stable@lists.freedesktop.org>
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
On GFX9, the driver is able to do an optimized fast depth/stencil
clear with only one aspect (ie. clear the stencil part of a
depth/stencil image). When this happens, the driver should only
update the clear values of the given aspect.
Note that it's currently only supported on GFX9 but I have some
local patches that extend this optimized path for other gens.
Closes: https://gitlab.freedesktop.org/mesa/mesa/issues/1967
Cc: 19.2 <mesa-stable@lists.freedesktop.org>
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
e.g. a VERTEX only flush with tess on Vega should look at the TCS
to see which bits are needed.
CC: <mesa-stable@lists.freedesktop.org>
Closes: https://gitlab.freedesktop.org/mesa/mesa/issues/1953
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
uintptr_t is 32 bits in a 32-bits build, resulting in shifting out
of bounds.
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
The buffer isn't necessarily used before.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
LLVM remains default and ACO can be enabled with RADV_PERFTEST=aco.
Co-authored-by: Daniel Schürmann <daniel@schuermann.dev>
Co-authored-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Use the fastest way only if both aspects are used. Oops.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111728
Fixes: 218ce34962 ("radv: add mipmap support for the clear depth/stencil values")
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Otherwise the next streamout operation will overwrite GDS. This
can be improved by tracking if there is a streamout operation in
flight. Currently the driver unconditionally flushes but that
doesn't matter much as NGG streamout is disabled by default.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
NGG streamout uses GDS and we have to make sure that another
process isn't going to overwrite GDS while our shaders are busy.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
It's used to determined the max emit per buffer.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This allocates two BOs for GFX10 NGG streamout.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This internal option is turned off by default because NGG streamout
still hangs. It seems like it's related to GDS as RadeonSI.
That option will be turned on once all issues are resolved.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Having two different structs is useless.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
16-bit and 32-bit values match hardware values but 8-bit doesn't.
This fixes dEQP-VK.pipeline.input_assembly.* with 8-bit index.
Fixes: 372c3dcfdb ("radv: implement VK_EXT_index_type_uint8")
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl
Test that found this: dEQP-VK.geometry.layered.1d_array.secondary_cmd_buffer
Fixes: 49e6c2fb78 "radv: Store color/depth surface info in attachment info instead of framebuffer."
Reviewed-by: Dave Airlie <airlied@redhat.com>
This makes it cheaper to just change the dynamic offsets with
the same descriptor sets.
This optimization has been reverted a while back because of
random GPU hangs on GFX9, no it looks fine, at least CTS no longer
hangs on GFX9 and it doesn't hang on GFX10 as well.
It fixes a performance problem with Wolfenstein Youngblood.
Suggested-by: Philip Rebohle <philip.rebohle@tu-dortmund.de>
Suggested-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
It should be possible to build it on-demand too but it requires
more work. On GFX10, the GS copy shader is required when tess
is enabled with extreme geometry.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This includes metadata as well. On GFX10, we have to invalidate
the L2 metadata cache when shaders read DCC.
Note that we still have to implement GFX10 coherency by
introducing INV_L2_METATADA but for now just flush L2.
This fixes a corruption with DCC and Talos.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
GFX10 uses the same register as GFX8.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Basically same as external for now.
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Only case we might need to handle differently in the near future
is Raven's case of displayable DCC which is not renderable. But
we don't support that yet.
Found while working on DCC for arrays.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
SMEM and VMEM caches are L0 on gfx10. Ported from RadeonSI.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Ported from RadeonSI, will be emitted for GFX10 too.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This reduces the size of fill operations needed to clear CMASK
for layered color textures.
GFX9 unsupported for now.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This reduces the size of fill operations needed to clear FMASK
for layered color textures.
GFX9 unsupported for now.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This fixes a rendering issue with RoTR/DXVK.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This simple extension might be useful for debugging purposes.
GAPID has support for it.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
HTILE decompressions need the user sample locations if specified
in the current subpass.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Otherwise fast color/depth clears can't work because they depend
on the framebuffer.
This fixes the following CTS (when the small hint is disabled):
- dEQP-VK.geometry.layered.1d_array.secondary_cmd_buffer
- dEQP-VK.geometry.layered.2d_array.secondary_cmd_buffer
- dEQP-VK.geometry.layered.cube.secondary_cmd_buffer
- dEQP-VK.geometry.layered.cube_array.secondary_cmd_buffer
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=110810
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107986
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This allows us to disable the FMASK decompress pass when
transitioning from CB writes to shader reads.
This will likely be improved and enabled by default in the future.
No CTS regressions on GFX8 but a few number of multisample CTS
failures on GFX9 (they look related to the small hint).
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
In other words, make use of radv_dcc_enabled() instead of
radv_image_has_dcc() all over the places.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Transitions to external queue should do the transition & make sure
it works on all queues.
Fixes: 8ebc7dcb59 "radv: Allow fast clears with concurrent queue mask for some layouts."
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
According to the Vulkan spec, inline uniform blocks are not allowed
to be updated through vkCmdPushDescriptorSetKHR().
These are the spec quotes from "13.2.1. Descriptor Set Layout"
that are relevant for this case:
"VK_DESCRIPTOR_SET_LAYOUT_CREATE_PUSH_DESCRIPTOR_BIT_KHR specifies
that descriptor sets must not be allocated using this layout, and
descriptors are instead pushed by vkCmdPushDescriptorSetKHR."
"If flags contains
VK_DESCRIPTOR_SET_LAYOUT_CREATE_PUSH_DESCRIPTOR_BIT_KHR, then all
elements of pBindings must not have a descriptorType of
VK_DESCRIPTOR_TYPE_INLINE_UNIFORM_BLOCK_EXT".
There is no explicit mention in vkCmdPushDescriptorSetKHR() to forbid
this case but it is implied in the creation of the descriptor set
layout as aforementioned.
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
uintptr_t is 32-bits then and shifting it by 32 bits results in undefined
behavior IIRC.
Fixes: b3c8de1c55 "radv: save all descriptor pointers into the trace BO"
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
From the Vulkan spec 1.1.109:
"Some implementations may need to evaluate depth image values
while performing image layout transitions. To accommodate this,
instances of the VkSampleLocationsInfoEXT structure can be
specified for each situation where an explicit or automatic
layout transition has to take place. [...] and
VkRenderPassSampleLocationsBeginInfoEXT can be chained from
VkRenderPassBeginInfo to provide sample locations for layout
transitions performed implicitly by a render pass instance."
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-By: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
From the Vulkan spec 1.1.109,
"Some implementations may need to evaluate depth image values
while performing image layout transitions. To accommodate this,
instances of the VkSampleLocationsInfoEXT structure can be
specified for each situation where an explicit or automatic
layout transition has to take place. VkSampleLocationsInfoEXT
can be chained from VkImageMemoryBarrier structures to provide
sample locations for layout transitions performed by
vkCmdWaitEvents and vkCmdPipelineBarrier calls."
This handles explicit depth/stencil layout transitions performed
with CmdWaitEvents() or CmdPipelineBarrier().
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-By: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This might fix initial subpass transitions when multiview is used.
Noticed while implementing sample locations during layout transitions.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-By: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Samuel Pitoiset
Bas Nieuwenhuizen
Daniel Schürmann
Timothy Arceri
Eric Engestrom
Samuel Iglesias Gonsálvez
Nicolai Hähnle