According to RFC 4189 CSV files should be encoded using CRLF newlines,
not LF. This helps compatibility with tools, like python's csv module,
who always uses CRLF.
While we're at it, normalize the one CSV that was CRLF in-repo to LF,
and let git do the newline-normalization when needed instead.
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12405>
Rather than using always the same metric set, let the user choose when
starting the producer with :
INTEL_PERFETTO_METRIC_SET=RasterizerAndPixelBackend ./build/src/tool/pps/pps-producer
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Rohan Garg <rohan.garg@intel.com>
Acked-by: Antonio Caggiano <antonio.caggiano@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13996>
Because these formats are introduced trough an extension, their
enum values are exceedingly large and we cannot use them to index
directly into the format table we had for core formats. Instead,
we put these in a separate table and we always use the
VK_ENUM_OFFSET helper to index into these tables.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14533>
V3D does not support formatless writings.
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Reviewed-by: Emma Anholt <emma@anholt.net>
Reviewed-by: Jose Maria Casanova Crespo <jmcasanova@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14288>
Between a troubles with Marge and FD.O, and requests for a bit more
time for a few patches to land, we're going to bump the release out by
three weeks.
Acked-by: Caio Oliveira <caio.oliveira@intel.com>
Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Acked-by: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14502>
This splits application-provided FMA in vertex/geometry/tesselation/mesh
shaders.
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14458>
Occlusion queries are supported always but only the number of
supported samples differ.
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Vasily Khoruzhick <anarsoul@gmail.com>
Reviewed-by: Emma Anholt <emma@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14361>
Occlusion queries are supported always but only the number of
supported samples differ.
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Juan A. Suarez <jasuarez@igalia.com>
Reviewed-by: Emma Anholt <emma@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14361>
- gen4 - has dp4acc and dp2acc, dp4acc is used to implement
4x8 dot product.
- gen3 - has dp2acc, in OpenCL blob uses dp2acc for dot product
on both get3 and gen4.
- gen2 - unknown, lower everything.
- gen1 - no dp2acc, lower everything. OpenCL blob doesn't advertise
cl_qcom_dot_product8 but still generates code for it.
The assembly is more verbose and uses yet to be documented
mad32.u16 instruction.
Passes:
dEQP-VK.spirv_assembly.instruction.compute.opsdotkhr.*
dEQP-VK.spirv_assembly.instruction.compute.opudotkhr.*
dEQP-VK.spirv_assembly.instruction.compute.opsudotkhr.*
dEQP-VK.spirv_assembly.instruction.compute.opsdotaccsatkhr.*
dEQP-VK.spirv_assembly.instruction.compute.opudotaccsatkhr.*
dEQP-VK.spirv_assembly.instruction.compute.opsudotaccsatkhr.*
Only packed 4x8 unsigned and mixed versions are accelerated.
However in theory we should be able to do better for signed version
than current NIR lowering.
Signed-off-by: Danylo Piliaiev <dpiliaiev@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13986>
Softpipe was the only driver still using this feature. I had enabled it
in ba22f014f9 ("softpipe: Enable PIPE_CAP_TGSI_ANY_REG_AS_ADDRESS;") for
an instr count win, but it's really not important to that driver and it's
not worth keeping the knob around just for that.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14360>
We don't plan to support NV_mesh_shader officially on RADV,
because it performs poorly on AMD hardware. However, we are
implementing this extension to get some experience with mesh
shader technology.
Users should not rely on this support because we are going
to remove it if/when a potential cross-vendor extension appears.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Acked-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13580>
There exists hardware intel gen4 specifically that has only 6 clip planes
but supports GLSL 1.30. This enhances the CAP so that the current values
of 0,1 remain the same, but giving it a larger number will override the
max.
This allows the gen4 intel to set this to 6 and leave everyone else alone.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14344>
These are always going to be on with gallium
v2: drop call, tidy up switch (kwg)
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14261>
- Default c_std is now c11, no need to workaround
89b4f337d5 ("c_std=c11 in meson default_options")
- gallium-xlib has been renamed to xlib:
76791db088 ("mesa/x11: Remove the swrast-classic-based fake libGL")
Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14216>
RGP doesn't support previous generations. This can be enabled with
RADV_THREAD_TRACE_CACHE_COUNTERS=true.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13737>
We're not going to move this directory like this comment suggests, as
the suggested target no longer exists. Let's just drop the mention.
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14079>
This was useful for emulating GL 3.2 in virgl on a GLES3 host renderer,
before GL_EXT_depth_clamp introduced the ability for hardware drivers to
expose the feature on GLES. Now that we have that, the desktop-GL-capable
HW that virgl cares about can expose desktop GL even on its GLES renderer
on the host without this emulation. I don't think anyone particularly
cares about hitting higher GL versions on actually-core-GLES hosts with
virgl.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Acked-by: Gert Wollny <gert.wollny@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13729>
It's a *long* time since SGI was the copyright holder for the OpenGL
trademark. And we implement more APIs by now, so let's update the
disclaimer to instead redirect to the Khronos licensing page for
details.
While we're at it, soften the language on legal status as a formal
implementation, as we currently have conformant drivers for most of the
APIs by now. But refer to the Khronos website for details, as
conformance status for drivers are subject to change.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13833>
Dave Airlie
Mike Blumenkrantz
Qiang Yu
Danylo Piliaiev
Erik Faye-Lund
Lionel Landwerlin
Jesse Natalie
Iago Toral Quiroga
Juan A. Suarez Romero
Eric Engestrom
Dylan Baker
Rhys Perry
Christian Gmeiner
Guilherme Gallo
Emma Anholt
Timur Kristóf
Markus_included
Pavel Ondračka
Jason2013
Alyssa Rosenzweig
Thomas H.P. Andersen
Adam Jackson
Samuel Pitoiset
Erik Faye-Lund
Timothy Arceri
Jan Zielinski
Bas Nieuwenhuizen