This enables the ARB_gpu_shader5 vertex streams on softpipe.
v2: only enable when not using llvm.
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
The list has 19.0.2 twice.
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
Split up the "Environment Variables" section into "Compiler Options"
and "Compiler Specification". I think this makes the information
easier to find and understand.
Add new Introduction and Advanced Usage sections.
Spell out a few more details, like "ninja install".
Improve the layout around example commands.
Fix grammatical errors and tighten up the text.
Explain the --prefix option.
v2: Remove language about 'ninja clean' and move link to Meson
information about separate build directories earlier in the page.
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Mention the tick-box otherwise only the MR author can rebase the series.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Dylan Baker <dylan@pnwbakers.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Reivewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
(cherry picked from commit 190a79f462710f04d67eaefe498ef6ae5b7f5b1a)
[Emil: drop VERSION hunk]
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Conflicts:
VERSION
Thanks to Yann Kervran for the report and suggestions.
Signed-off-by: Emmanuel Gil Peyrot <linkmauve@linkmauve.fr>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Sending MRs from the main Mesa repository increase clutter in the
repository, and decrease visibility of project-wide branches. So it's
better if MRs are sent from forks instead.
Let's add a note about this, in case its not obvious to everyone.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Both the Intel and RADV people have been really bad about adding things
to the release notes. We should start actually paying attention.
Acked-by: Tapani Pälli <tapani.palli@intel.com>
As suggested by Emil Velikov.
Cc: Dylan Baker <dylan.c.baker@intel.com>
Cc: Juan A. Suarez <jasuarez@igalia.com>
Cc: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Andres Gomez <agomez@igalia.com>
Acked-by: Dylan Baker <dylan@pnwbakers.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Now that we have software implementations of ARB_gpu_shader_int64 and
ARB_gpu_shader_fp64 we can unconditionally enable these extensions.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
v2: replace incorrect "<td/>" with "<td>" (Eric).
Cc: Dylan Baker <dylan.c.baker@intel.com>
Cc: Juan A. Suarez <jasuarez@igalia.com>
Cc: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Andres Gomez <agomez@igalia.com>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
Acked-by: Juan A. Suarez <jasuarez@igalia.com>
Hopefully we can kick start the revolution and other distros will start
providing them as well :)
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
`gcc-ar` is preferred over the generic `ar`, and the `arm` family is
for 32-bit ARM [1].
[1] https://mesonbuild.com/Reference-tables.html#cpu-families
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
I know it's not what anyone wants, but how about we start with a
message in the documentation that encourages people to try meson.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Eric Engeström <eric@engestrom.ch>
Note that meson requires python 3, scons requires python 2, and
autotools works with either.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Eric Engeström <eric@engestrom.ch>
So that gitlab will render the < and > correctly allowing the tag to be
copy-n-pasted without additional formatting.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Because of the many caveats involved, using -Dc_args instead of CFLAGS
is recommended both by meson upstream and by us.
v2: - Fix typo
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl> (v1)
Reviewed-by: Eric Anholt <eric@anholt.net>
Across several projects I've seen new contributors say "I wasn't sure if I
should provide a review tag since I'm not really an expert in this area."
Everyone I know already applies some implicit weighting to reviews from
different people, so encourage participation.
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Note that we have an official GL extension number, pick the appropriate
section of the GLX spec to modify, and add changelog.
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
This has not even had an attempt at implementation. If you asked for
renderer 0 - which, the spec implies, should always work - then
dri2_convert_glx_attribs would fail, we'd silently fall back to creating
an indirect context, and xserver would also not recognize the attribute
and would throw BadValue at you.
The API would be difficult to use in any case, since there's no way to
enumerate how many renderers the screen has. I'd be tempted to add that
by defining:
glXQueryRendererIntegerMESA(dpy, screen,
/* renderer = */ -1,
0, &value);
to return the number of renderers, but a new entrypoint might be
cleaner. Still, better to not specify it at all than to lie about it.
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
In one place we say, if GLES isn't supported then the profile version
will be 0.0. Then later we say, if the GLES profile extension isn't
supported then GLX_RENDERER_OPENGL_ES_PROFILE_VERSION_MESA is not
mentioned in the spec. A strict reading of the latter would mean that
GLX_RENDERER_OPENGL_ES_PROFILE_VERSION_MESA is not a recognized token,
and the query should instead return False.
The implementation does not check for the GLES profile extensions, and
the additional complexity doesn't seem worth it. Removing the
interaction text makes the spec match the implementation.
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
This documents a process for using GitLab Merge Requests as an second
way to submit code changes for Mesa. Only one of the two methods is
allowed for each patch series.
We will *not* require all patches to be emailed. Some code changes may
be reviewed and merged without any discussion on the mesa-dev email
list.
v2:
* No longer require email. Allow submitter to choose email or a
GitLab merge request.
* Various feedback from Brian, Daniel, Dylan, Eric, Erik, Jason,
Matt, Michel and Rob.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Acked-by: Dylan Baker <dylan@pnwbakers.com>
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Acked-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Acked-by: Rob Clark <robdclark@gmail.com>
As 18.3 was published with some delay, let's extend 18.2 life for
another extra release.
CC: Andres Gomez <agomez@igalia.com>
CC: Dylan Baker <dylan@pnwbakers.com>
CC: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Andres Gomez <agomez@igalia.com>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
Acked-by: Dylan Baker <dylan@pnwbakers.com>
The spec was modified to support GLES. Tested by piglit.
v2: rebase
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu> (v1)
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
For format fallbacks like ETC and ASTC, switching between sRGB and linear
decoding is undefined, or at least is not bit-exact. Same as
EXT_texture_sRGB_decode on GLES.
There are no piglit or dEQP regresssions.
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
This extension is not properly tested (testing for
GL_ARB_fragment_shader_interlock is not sufficient), and since this was
noted in review on August 28th no tests have been sent.
Revert "i965: Add INTEL_fragment_shader_ordering support."
Revert "mesa: Add GL/GLSL plumbing for INTEL_fragment_shader_ordering"
This reverts commit 03ecec9ed2.
This reverts commit 119435c877.
Cc: mesa-stable@lists.freedesktop.org
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
Acked-by: Eric Anholt <eric@anholt.net>
A while back we agreed that having a live/staging branch is beneficial.
Sadly we forgot to document that, so here is my first attempt.
Document the caveat that the branch history is not stable.
CC: Andres Gomez <agomez@igalia.com>
CC: Dylan Baker <dylan@pnwbakers.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Juan A. Suarez <jasuarez@igalia.com>
Reword slightly and highlight the important parts of the text.
CC: Andres Gomez <agomez@igalia.com>
CC: Dylan Baker <dylan@pnwbakers.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Juan A. Suarez <jasuarez@igalia.com>
The device extension string is expected to contain the name of the
extension defining what kind of device it is, so the caller can know
what kinds of operations it can perform with it. So that string had
better be non-empty, hence this trivial extension.
v2:
- drop "fallback", update history and update contributor list
Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
Emil will be helping out with 18.3, while Juan finalises 18.2
v2: [Emil] add Emil for 18.3, fix typos
CC: Emil Velikov <emil.velikov@collabora.com>
CC: Juan A. Romero Suarez <jasuarez@igalia.com>
Cc: Dylan Baker <dylan@pnwbakers.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
Reviewed-by: Juan A. Suarez <jasuarez@igalia.com>
I'll take care of 18.2 releases series on Andres behalf.
CC: Andres Gomez <agomez@igalia.com>
CC: Dylan Baker <dylan@pnwbakers.com>
CC: Emil Velikov <emil.l.velikov@gmail.com>
Fixes: 86b4bd52dc ("docs: update calendar, add news item and link
release notes for 18.2.3")
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
`git-branch` doesn't exist, and mesa3d-dev hasn't been used in a great
many years :)
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
I also updated the developer instructions; presumably someone who's been
given commit rights already knows how to clone a repository :)
A more useful thing is to show how to update the pushurl, and how to use
access tokens to push over HTTPS (especially for us at Intel, where
non-http traffic is a pain).
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
It's just over 10 months since 17.3.0 was released with s3tc support enabled.
Probably a good idea to update the FAQ page.
v2: Incorporate feedback from Adam Jackson <ajax@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Fixes: 04396a134f ("mesa: Import libtxc_dxtn sources")
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
v2: - fix typo
These are how FreeBSD and Debian handle multiple versions of LLVM
installed at the same time, respectively.
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Due to having 2 additional RCs for 18.2.
Cc: Dylan Baker <dylan.c.baker@intel.com>
Cc: Juan A. Suarez <jasuarez@igalia.com>
Cc: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Andres Gomez <agomez@igalia.com>
Acked-by: Dylan Baker <dylan@pnwbakers.com>
Acked-by: Juan A. Suarez <jasuarez@igalia.com>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
Adds suppport for INTEL_fragment_shader_ordering. We achieve
the fragment ordering by using the same instruction as for
beginInvocationInterlockARB() which is by issuing a memory
fence via sendc.
Signed-off-by: Kevin Rogovin <kevin.rogovin@intel.com>
Reviewed-by: Plamena Manolova <plamena.manolova@intel.com>
because the closed driver exposes it.
It's equivalent to ARB_gpu_shader_int64.
In this patch, I did everything the same as we do for ARB_gpu_shader_int64.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
The requirement was bumped a while back, but we forgot to update the
docs.
Fixes: ed871af91c ("configure.ac: raise Mako required version to
0.8.0")
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Currently we use AC_CHECK_PROGS looking for python2.7, python2 and
finally python. That is due to the varying names used across the
different OS.
Use the handy AM_PATH_PYTHON which finds the correct name and checks for
the version.
Note: python2.7 has been an unofficial requirement for quite some time.
Update the docs to reflect that.
Cc: Dylan Baker <dylan@pnwbakers.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
v2: Describe interactions with the capabilities added by
SPV_INTEL_shader_atomic_float_minmax
v3: Remove 64-bit float support.
v4: Explain NaN issues. Explain issues with atomicMin(-0, +0) and
atomicMax(-0, +0).
v5: Fix whitespace issues noticed by Caio.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
We need to handle the gaps in the streamout bindings on the guest
side and enable if it the host has the rest enabled.
Reviewed-by: Jakob Bornecrantz <jakob@collabora.com>
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Driver and application can put their drirc files in
${datadir}/drirc.d/ with name xxx.conf. Config files
will be read and applied in file name alphabetic order.
So there are three places for drirc listed in order:
1. /usr/share/drirc.d/
2. /etc/drirc
3. ~/.drirc
v4:
fix meson build
v3:
1. seperate driParseConfigFiles refine into another patch
2. fix entries[i] mem leak
v2:
drop /etc/drirc.d
Signed-off-by: Qiang Yu <Qiang.Yu@amd.com>
Acked-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Adds an extension to glFramebufferParameteri
that will specify if the framebuffer is vertically
flipped. Historically system framebuffers are
vertically flipped and user framebuffers are not.
Checking to see the state was done by looking at
the name field. This adds an explicit field.
v2:
* updated spec language [for chadv]
* correctly specifying ES 3.1 [for chadv]
* refactor access to rb->Name [for jason]
* handle GetFramebufferParameteriv [for chadv]
v3:
* correct _mesa_GetMultisamplefv [for kusmabite]
v4:
* update spec language [for chadv]
* s/GLboolean/bool/g [for chadv]
* s/InvertedY/FlipY/g [for chadv]
* s/inverted_y/flip_y/g [for chadv]
* assert changes [for chadv]
Reviewed-by: Chad Versace <chadversary@chromium.org>
Seems something went wrong somehow when it was pushed.
v2: combine into one list
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Marek OIšák <marek.olsak@amd.com>
Additionally, I've extended the 18.1 cycle by one more release,
tentatively assigned to Dylan, due to the ~2 weeks delay for 18.2.
Cc: Dylan Baker <dylan.c.baker@intel.com>
Cc: Juan A. Suarez <jasuarez@igalia.com>
Cc: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Andres Gomez <agomez@igalia.com>
Acked-by: Dylan Baker <dylan@pnwbakers.com>
Reviewed-by: Juan A. Suarez <jasuarez@igalia.com>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
As discussed at:
https://lists.freedesktop.org/archives/mesa-dev/2018-March/188525.html
Cc: Emil Velikov <emil.velikov@collabora.com>
Cc: Juan A. Suarez Romero <jasuarez@igalia.com>
Cc: Dylan Baker <dylan.c.baker@intel.com>
Cc: Ian Romanick <ian.d.romanick@intel.com>
Cc: Carl Worth <cworth@cworth.org>
Cc: Mark Janes <mark.a.janes@intel.com>
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Juan A. Suarez <jasuarez@igalia.com>
Acked-by: Dylan Baker <dylan@pnwbakers.com>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
Cc: Emil Velikov <emil.velikov@collabora.com>
Cc: Eric Engestrom <eric.engestrom@intel.com>
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
While we're at it, add some extensions we missed along the way like the
VK_KHR_maintenanceN extensions.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
ARB_texture_float references US Patent #6,650,327 [1] which has a filing date
of June 16 1998.
According to [2], patents filed after 1995 expire 20 years from the filing
date, giving an expiration of June 17 2018.
[1] https://www.google.com/patents/US6650327
[2] https://en.wikipedia.org/wiki/Term_of_patent_in_the_United_States
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
This enables ARB_gpu_shader_fp64 if the host provides it.
Tested-by: Gurchetan Singh <gurchetansingh@chromium.org>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
This hopefully adds virgl to the correct places and current statuses
of various extensions.
virgl of course relies on two external things
a) host driver that can support the features
b) up to date host virglrenderer library that can support the features.
This list will be maintained as latest (a) + (b) + mesa.
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
Cc: Emil Velikov <emil.l.velikov@gmail.com>
Cc: Daniel Stone <daniels@collabora.com>
Cc: Andres Gomez <agomez@igalia.com>
Cc: Dylan Baker <dylan@pnwbakers.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Adds suppport for ARB_fragment_shader_interlock. We achieve
the interlock and fragment ordering by issuing a memory fence
via sendc.
Signed-off-by: Plamena Manolova <plamena.manolova@intel.com>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Dylan will replace Emil as the release manager for 18.1.x series.
CC: Emil Velikov <emil.l.velikov@gmail.com>
CC: Dylan Baker <dylan@pnwbakers.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
favicon.png is just gears.png resized to 64x64, and favicon.ico is
generated using this command, adapted from the ImageMagick example [1]:
$ convert favicon.png -background black \
\( -clone 0 -resize 16x16 \) \
\( -clone 0 -resize 32x32 \) \
\( -clone 0 -resize 48x48 \) \
\( -clone 0 -resize 64x64 \) \
-delete 0 -alpha off -colors 256 favicon.ico
We could edit every html page to add `<link rel="icon" href="favicon.ico" />`,
but there's not much point as pretty much every browser will pick it up
automatically if the file is named `favicon.ico` and is in the root folder.
[1] http://www.imagemagick.org/Usage/thumbnails/#favicon
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
I'm guessing an earlier version of the website used to have the page
contents in <frames>, but this isn't the case anymore so just drop the
unnecessary `target="_main"` :)
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
glPolygonOffset() has been part of the GL standard since 1.1. Also
niether AMD or Nvidia support this in their binary drivers.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=61761
Mesa 18.1 series has not been released yet, so let's extend 18.0 lifetime.
v2: Add missing closing TR tags (Eric Engestrom)
CC: Andres Gomez <agomez@igalia.com>
CC: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Andres Gomez <agomez@igalia.com>
We have already required 0.44 for building clover and swr, so it was
already partially required. This just makes it required across the board
instead of just for clover and swr.
There is a bug in 0.44 which makes it impossible to build mesa in some
configurations, so require 0.44.1 which fixes this.
Signed-off-by: Dylan Baker <dylan.c.baker@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
This was done a while ago but never marked on features.txt. Note that
this is only supported on GM200+.
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Dylan has kindly stepped up to help with 18.1.0, while I've taken the
liberty to nominate Andres for 18.2.0 ;-)
As always, people are welcome to swap/adjust where needed.
v2: Add Juan for 18.0.x (Juan)
Cc: Andres Gomez <agomez@igalia.com>
Reviewed-by: Juan A. Suarez <jasuarez@igalia.com>
Acked-by: Dylan Baker <dylan@pnwbakers.com> (v1)
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
v2:
- Provide a correct explanation on the envvars documentation (Ian).
- Provide a more correct explanation on the function comments (Andres).
v3:
- Homogenize documentation and inline comments (Emil).
- Correct a typo (Emil).
Fixes: 2599b92eb9 ("mesa: allow forcing >=3.1 compatibility contexts
with MESA_GL_VERSION_OVERRIDE")
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ian Romanick <ian.d.romanick@intel.com>
Cc: Eric Engestrom <eric.engestrom@imgtec.com>
Cc: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Currently, any driver that does not support the ARB_compatibility
extension will fail on GL3.1 context creation if the application does
not request the forward-compatiblity flag.
Restore the original check which changes mesa_api to API_OPENGL_CORE,
only when:
- GL3.1 is requested, without the forward-compatiblity flag.
- driver does not support ARB_compatibility - as deduced by
max_gl_compat_version.
Fixes: a0c8b49284 ("mesa: enable OpenGL 3.1 with ARB_compatibility")
v2:
- Improve commit log (Emil).
- Provide a correct explanation on the features documentation (Ian).
Cc: Marek Olšák <marek.olsak@amd.com>
Cc: Ian Romanick <ian.d.romanick@intel.com>
Cc: Kenneth Graunke <kenneth@whitecape.org>
Cc: Eric Engestrom <eric.engestrom@imgtec.com>
Cc: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
This also removes some useless code leftover from old changes.
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Note: the file was originally 17.4.0, yet git stuggles to detect the
move :-\
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
(cherry picked from commit dceb1ce807a8b0ab32dc16b38040969bdbcc0d1b)
Title is about 17.3.5, when it must be about 17.3.6.
CC: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Mesa 18.0 series has not been released yet, so let's extend 17.3 lifetime.
v2: add 17.3.9 in the calendar (Andres Gomez)
CC: Andres Gomez <agomez@igalia.com>
CC: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Meson is pretty well tested and works in most configurations now, so we
can remove the warning about it being unsuited for actual use.
It's also worth documenting that meson 0.42.0 or greater is required.
v2: - Minor rewording of supported platforms as suggested by Emil
- Add two missing tags as reported by xmllint --html
Signed-off-by: Dylan Baker <dylan.c.baker@intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com> (v1)
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com> (v1)
Reported-by: Pierre Moreau <pierre.morrow@free.fr>
Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Cc: Emil Velikov <emil.velikov@collabora.com>
Cc: Juan A. Suarez Romero <jasuarez@igalia.com>
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Juan A. Suarez <jasuarez@igalia.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
For scons, windows/mingw dealing with LLVM_CONFIG is done before
untarring. This is also more convenient for copy and paste.
Cc: Emil Velikov <emil.velikov@collabora.com>
Cc: Juan A. Suarez Romero <jasuarez@igalia.com>
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Juan A. Suarez <jasuarez@igalia.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Cc: Emil Velikov <emil.velikov@collabora.com>
Cc: Juan A. Suarez Romero <jasuarez@igalia.com>
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Juan A. Suarez <jasuarez@igalia.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Cc: Emil Velikov <emil.velikov@collabora.com>
Cc: Juan A. Suarez Romero <jasuarez@igalia.com>
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Juan A. Suarez <jasuarez@igalia.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Cc: Emil Velikov <emil.velikov@collabora.com>
Cc: Juan A. Suarez Romero <jasuarez@igalia.com>
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Juan A. Suarez <jasuarez@igalia.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Only one piglit test fails,
sso-vs-gs-fs-array-interleave
There are 3 tests using ssbo without checking sizes failing also
but those are test bugs.
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This was already being reported, just missed the docs.
Reported-by: Dieter Nützel <Dieter@nuetzel-hh.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Cc: Emil Velikov <emil.velikov@collabora.com>
Cc: Juan A. Suarez Romero <jasuarez@igalia.com>
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Juan A. Suarez <jasuarez@igalia.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Power8, Power8NV, and Power9 are supported on an equal footing
with X86.
Cc: "17.2" "17.3" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Ben Crocker <bcrocker@redhat.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
[Eric: changed formatting, reworded a bit (with Ben's ack)]
Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>
It has been obsolete for years - state it explicitly.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
v2: Missing td tag, add Andres + Juan for 17.2.8 and 17.3.3
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Acked-by: Nicolai Hähnle <nicolai.haehnle@amd.com> (v1)
Reviewed-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Aimed to work with Glide, which hasn't been a thing in over 10 years.
There are no drivers that implement it, so annotate it as obsolete
v2: Move the extension to OLD/
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Brian Paul <brianp@vmware.com> (v1)
Reviewed-by: Adam Jackson <ajax@redhat.com> (v1)
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
The implementation is a simple 'return EGL_FALSE'. Stop pretending and
simply remove it.
Note: the removal of XMesa API is fine, since there hasn't been any
users for it in years.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
No Mesa driver has implemented the extension in ages. Seemingly non Mesa
drivers don't implement it either.
As mentioned by Ian, the extension is effectively superseded by
ARB_vertex_buffer_object.
v2: Move the extension to OLD/
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Brian Paul <brianp@vmware.com> (v1)
Reviewed-by: Adam Jackson <ajax@redhat.com> (v1)
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
This just builds on the image support. Evergreen only has ssbo
for fragment and compute no other stages.
v2: handle images and ssbo in the same shader properly (Ilia)
v3: fix RESQ on buffers,
fix missing atom emit
fix first element offset
use R32 format
write separate buffer rat store path.
(from running deqp gles3.1 tests)
Signed-off-by: Dave Airlie <airlied@redhat.com>
Language and spelling fixups in three places.
Cc: "17.2" "17.3" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Ben Crocker <bcrocker@redhat.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
[Eric: move two fixes from the other patch to this one.]
Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>
Bug https://bugs.freedesktop.org/show_bug.cgi?id=103626 was
incorrectly listed as fixed.
Signed-off-by: Andres Gomez <agomez@igalia.com>
(cherry picked from commit b9b60dbf55a1307a60a333c70c3add3643243c36)
This is a copy of the a5xx logic. Fails a few tests, but basic
functionality is there.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Unfortunately Adreno A4xx hardware returns incorrect results with the
GATHER4 opcodes. As a result, we have to lower to 4 individual texture
calls (txl since we have to force lod to 0). We achieve this using
offsets, including on cube maps which normally never have offsets.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Just comparing glxinfo and features.txt, and it seems features.txt is
fairly out of date. The a5xx specific features (compute/images/atomics/
etc) are recent.
Signed-off-by: Rob Clark <robdclark@gmail.com>
v2: - Add information about CC, CXX, CFLAGS, and CXXFLAGS (Nicolai)
- Add message at top that meson for mesa is still a work in progress
- Add trailing "/" to directories (Eric E.)
- Fix a number of spelling/grammar/style suggestions from Eric E.
- Make a number of changes as suggested by Emil.
v3: - Fix order of commands in example (Eric E.)
- Add documentation for overriding LLVM version (Eric E.)
v4: - Rebase on master
- update default buildtype
- add note about b_ndebug
- Clarify meson configure a bit
v5: - use <code> for command line arguments (Eric E.)
- Add note about listing options without a build directory
- Minor formatting changes (Eric E.)
- Replace the CC, CFLAGS, etc section with an environment variables
section, which mentions CC, CXX, CFLAGS, CXXFLAGS, LDFLAGS, and
DESTDIR
- Add comment that not using buildtype debug might make debugging
harder
- Add comment that b_ndebug and buildtype are orthogonal
Signed-off-by: Dylan Baker <dylanx.c.baker@intel.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch> (v3)
v2: Choose a proper rejection example (Emil).
Cc: Emil Velikov <emil.velikov@collabora.com>
Cc: Eric Engestrom <eric.engestrom@imgtec.com>
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Cc: Emil Velikov <emil.velikov@collabora.com>
Cc: Eric Engestrom <eric.engestrom@imgtec.com>
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Cc: Emil Velikov <emil.velikov@collabora.com>
Cc: Eric Engestrom <eric.engestrom@imgtec.com>
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
13b303ff92 added the actual enums but
didn't remove the already existing XXXX ones. (And also duplicated
the "fragment" names instead of using the "vertex" names.)
Fixes: 13b303ff92 "docs: Update the list of used MESA GL enums."
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
(Apologies for the double negative.)
For now, the shader cache is disabled by default on i965 to allow us
to verify its stability.
In other words, to enable the shader cache on i965, set
MESA_GLSL_CACHE_DISABLE to false or 0. If the variable is unset, then
the shader cache will be disabled.
We use the build-id of i965_dri.so for the timestamp, and the pci
device id for the device name.
v2:
* Simplify code by forcing link to include build id sha. (Matt)
v3:
* Don't use a for loop with snprintf for bin to hex. (Matt)
* Assume fixed length render and timestamp string to further simplify
code.
Cc: Matt Turner <mattst88@gmail.com>
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Drivers have supported KHR_no_error for a while. We'd been leaving it
marked as "in progress" because there's a zillion places that could get
slightly more optimized. But, Timothy and Samuel have already done
piles of work, and I think we have a solid implementation at this point.
Let's check it off the list.
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Suggested-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
These extensions are good for Vulkan interop, so track them.
Signed-off-by: Jakob Bornecrantz <jakob.bornecrantz@collabora.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
The intent is to use this extension on vc4 to allow X11 to do overlapping
CopyArea() within a pixmap without first blitting the pixmap to a
temporary. With associated glamor patches, improves x11perf
-copywinwin100 performance on a Raspberry Pi 3 from ~4700/sec to
~5130/sec, and is an even larger boost to uncomposited window movement
performance (most copywinwin100 copies don't overlap).
v2: Fix glIsEnabled() on the new enums.
v3: Drop the local spec since I'm upstreaming the spec.
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Noticed that we had two 0x8bb4 in the spec while grepping to find an open
slot in the MESA enums set. gl.xml had the right value.
Acked-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
This extension is effectively a backport of GLES3's internalformat
handling to GLES 1/2. It guarantees that sized internalformats specified
for textures and renderbuffers have at least the specified size stored.
That's a pretty minimal requirement, so I think it can be dummy_true and
exposed as a standard in Mesa.
As a side effect, it also allows GL_RGB565 to be specified as a texture
format, not just as a renderbuffer. Mesa had previously been allowing 565
textures, which angered DEQP in the absence of this extension being
exposed.
v2: Allow 2101010rev with sized internalformats even on GLES3, citing the
extension spec. Extend extension checks for GLES2 contexts exposing
with texture_float, texture_half_float, and texture_rg.
v3: Fix ALPHA/LUMINANCE/LUMINANCE_ALPHA error checking (GLES3 CTS
failures)
v4: Mark GL_RGB10 non-color-renderable on ES, fix A/L/LA errors on GLES2
with float formats.
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
"Driver" isn't a great word for what this layer is, it's effectively a
build-time choice about what OS you're targeting. Despite that both of
the extant backends totally ignore the display argument, the old code
would only set up the backend relative to a display.
That causes problems! One problem is it means eglGetProcAddress can
generate X or Wayland protocol when it tries to connect to a default
display so it can call into the backend, which is, you know, completely
bonkers. Any other EGL API that doesn't reference a display, like
EGL_EXT_device_query, would have the same issue.
Fortunately this is a problem that can be solved with the delete key.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
This uses all the existing code to calculate lod values for mip linear
filtering. Though we'll have to disable the simplifications (if we know some
parts of the lod calculation won't actually matter for filtering purposes due
to mip clamps etc.). For better or worse, we'll also disable lod calculation
hacks (mostly should make a difference for cube maps) always - the issue with
per-pixel lod being difficult is mostly because we then have different mipmaps
needed for the actual texel fetch, which isn't a problem with lodq.
We still use approximation for the log2 - for that reason I believe the float
part of the lod is only accurate to about 4-5 bits (and one bit less with 1d
textures actually) which is hopefully good enough (though d3d10 technically
requires 6 bits - could use quadratic interpolation instead of linear to get
8 bits or so).
Since lodq requires unclamped lod, we also have to move some sampler key
calculations to texture sampling code - even if we know we're going to access
mipmap 0 we still have to calculate lod and apply lod_bias for lodq.
Passes piglit ARB_texture_query_lod tests (after having fixed the test).
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Fixes: 6a8aa11c20 "st/omx_bellagio: Rename state tracker and option"
Cc: Gurkirpal Singh <gurkirpal204@gmail.com>
Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Andres Gomez <agomez@igalia.com>
Jason and I use this for debugging all the time. Recompiling the driver
to enable it is kind of annoying. It's a great thing to try along with
always_flush_batch=true and always_flush_cache=true to detect a class of
problems - namely, atoms listening to an insufficient set of dirty bits.
Reviewed-by: Matt Turner <mattst88@gmail.com>
When a batch is submitted, INTEL_DEBUG=bat prints a message indicating
which part of the code triggered the flush, and some statistics about
the batch/state buffer utilization.
It also decodes the batchbuffer in debug builds...which is so much
output that it drowns out the utilization messages, if that's all you
care about.
INTEL_DEBUG=submit now just does the utilization messages.
INTEL_DEBUG=bat continues to do both (as the message is a good indicator
that we're starting decode of a new batch).
v2: Rename from "flush" to "submit" (suggested by Chris) because we
might want "flush" for PIPE_CONTROL debugging someday.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Support for external egl drivers was dropped a few years ago.
Fixes: 209360bbb9 "egl/main: drop support for external egl drivers"
Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Instead of setting based on set/unset, allow users to use boolean values.
In the docs and tests, use `DISABLE=true` instead of `DISABLE=1` as it's
clearer IMO.
Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Instead of setting based on set/unset, allow users to use boolean values.
In the docs, use `NO_DRAWARRAYS=true` instead of `NO_DRAWARRAYS=1` as it's
clearer IMO.
Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Instead of setting based on set/unset, allow users to use boolean values.
In the docs, use `DISABLE=true` instead of `DISABLE=1` as it's clearer IMO.
Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Instead of setting based on set/unset, allow users to use boolean values.
In the docs, use `ALWAYS=true` instead of `ALWAYS=1` as it's clearer IMO.
Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Instead of setting based on set/unset, allow users to use boolean values.
In the docs, use `ALWAYS=true` instead of `ALWAYS=1` as it's clearer IMO.
Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
This was implemented since forever, but not enabled.
It passes all piglit tests except one, arb_pipeline_statistics_query-frag.
The reason is that the test (for drawing a 10x10 rect) expects between
100 and 150 pixel shader invocations. But since llvmpipe counts this with
4x4 granularity (and due to the rect being 2 tris) we end up with 224
invocations. I believe however what llvmpipe is doing violates neither the
spirit nor the letter of the spec (our fragment shader granularity really
is 4x4 pixels, albeit we will bail out early on 2x2 or 4x2 (the latter
if AVX is available) granularity), the spec allows to count additional
invocations due to implementation reasons.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
I changed the behaviour earlier today, but forgot to update the
corresponding docs.
Fixes: 77713a0acb "mesa: allow user to set MESA_NO_ERROR=0"
Suggested-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>
v2: Correct 17.1.10 version, adjust some names.
v3: Add missing <tr> (Andres)
Cc: Juan A. Suárez <jasuarez@igalia.com>
Cc: Andres Gomez <agomez@igalia.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com> (v1)
Use consistent way to manage "non-default" llvm installations, clearly
documenting it.
AKA, use LLVM_CONFIG throughout and unset for the Windows/mingw builds.
v2: unset the save_ variable (Andres)
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com> (v1)
One can control the number of jobs via MAKEFLAGS. As such there's
little reason to set the number of jobs for each make invocation.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Cc: Emil Velikov <emil.velikov@collabora.com>
Cc: Juan A. Suarez Romero <jasuarez@igalia.com>
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Completed the 17.2 cycle and added the beginning of the 17.3 one.
v2: Add 17.2-rc6 as tentative final version to be promoted to 17.2.0
final (Eric).
Cc: Emil Velikov <emil.velikov@collabora.com>
Cc: Juan A. Suarez Romero <jasuarez@igalia.com>
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Semantically identical to the EXT version (whose string is still valid
for GLES), so rename the bit but expose both extension strings.
(Suggested by Ilia Mirkin and Ian Romanick.)
v3: Fix the entrypoint alias in GL4x.xml (Ilia)
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
The only difference from the EXT version is bumping the minmax to 16, so
just hit all the drivers at once.
v2: Fix driver names, add to 17.3 release notes (Ilia Mirkin)
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Outdated, features.txt is used instead.
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Intel has a Jenkins setup and has made the various scripts and
documentation open source.
https://github.com/janesma/mesa_jenkins
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
This is an unoffical unmaintained driver, we don't really want
people wasting effort trying to improve it.
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
The driver supported this since way before the GL spec for it existed.
Just need to support both the per-stream and for all streams variants
(which are identical due to only supporting 1 stream).
Passes piglit arb_transform_feedback_overflow_query-basic.
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
The driver was supposed to support this since way before the GL spec for it
existed, albeit it was apparently broken, so fix and enable it.
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
The configuration option --with-sha1 is no longer required for the
MESA_SHADER_READ_PATH, MESA_SHADER_DUMP_PATH environment variables
to take effect.
1- removed the "--with-sha1" sentence from docs/shading.html
2- added an extra note: that the corresponding dumped and replacement
shaders must have the same filenames for the feature to take effect.
Acked-by: Tapani Pälli <tapani.palli@intel.com>
ARB_polygon_offset_clamp and ARB_texture_filter_anisotropic look like
they'd be pretty trivial to wire up.
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Dave Airlie
Caio Marcelo de Oliveira Filho
Dave Airlie
Emil Velikov
Guido Günther
Marek Olšák
Dylan Baker
Rob Clark
Rhys Perry
Brian Paul
Albert Pal
Eric Engestrom
Bas Nieuwenhuizen
Jason Ekstrand
Gurchetan Singh
Emmanuel Gil Peyrot
Veluri Mithun
Erik Faye-Lund
Emil Velikov
Andres Gomez
Matt Turner
Juan A. Suarez Romero
Ilia Mirkin
Eric Anholt
Adam Jackson
Jordan Justen
Dieter Nützel
Stuart Young
Jose Fonseca
Kevin Rogovin
Kevin Rogovin
Ian Romanick
Timothy Arceri
Qiang Yu
Tapani Pälli
Fritz Koenig
Jason Ekstrand
Plamena Manolova
Eric Engestrom
Francisco Jerez
Rafael Antognolli
Andres Rodriguez
Emil Velikov
Ben Crocker
Kai Wasserbäch
Roland Scheidegger
Kenneth Graunke
Chris Wilson
Jakob Bornecrantz
Eric Engestrom
Eleni Maria Stea
Nicolai Hähnle