Add resource_changed to the ddebug, rbug, and trace wrappers. Since it
is optional, there is no need to add it to noop.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Suggested-by: Nicolai Hähnle <nhaehnle@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Use the resource_changed callback to invalidate internal resources
derived from external textures when they are (re-)bound. This is needed
to comply with the requirement from the GL_OES_EGL_image_external
extension that a call to glBindTexture guarantees that all further
sampling will return values that correspond to the values in the
external texture at or after the time that glBindTexture was called.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
To comply with the requirement from the GL_OES_EGL_image_external
extension that a call to glBindTexture guarantees that all further
sampling will return values that correspond to the values in the
external texture at or after the time that glBindTexture was called,
do not bail out early from mesa_BindTextures if the target is
external.
This will later allow the state tracker to instruct the pipe driver
to invalidate internal resources derived from the external texture.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Implement the resource_changed pipe callback to invalidate internal
resources derived from imported buffers. This is needed to update the
texture for re-imported renderables.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Imported resources already have contents that we want to be copied to
texture resources derived from them. Set initial seqno of imported
resources to 1, just as if it had already been rendered to.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
For imported buffers that can't be used directly as a source to the
texture samplers, the pipe driver might need to create an internal
copy, for example in a different tiling layout. When buffers are
reimported they may contain new image data, so the driver internal
copies need to be recreated.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Add a hook to tell drivers that an imported resource may have changed
and they need to update their internal derived resources.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Otherwise we'll get a lovely message as below:
"require_dri_shared_libs_and_glapi: command not found"
Cc: Steven Newbury <steve@snewbury.org.uk>
Reported-by: Steven Newbury <steve@snewbury.org.uk>
Fixes: da410e6afa "configure: explicitly require shared glapi for
enable-dri"
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Tested-by: Steven Newbury <steve@snewbury.org.uk>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Fixes: e99b9395be "gallium/hud: Add support for CPU frequency monitoring"
Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
We were including it once per value, so probably around 10k times.
Let's not cause the compiler any more work than we have to.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
It's harmless to use ALIGN_NPOT() for uncompressed formats
because they have block width/height = 1.
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Fixes crash in piglit
`egl_khr_gl_renderbuffer_image-clear-shared-image GL_DEPTH_COMPONENT24`
on Skylake.
The crash happened because blorp attempted to execute a pending hiz
clear after the hiz buffer was deleted. Deleting the pending hiz ops
when the hiz buffer gets deleted fixes the crash.
For good measure, this patch also deletes all pending CCS/MCS ops when
the CCS/MCS buffer gets deleted. I'm now aware of any bugs
caused by the dangling ops, but deleting them is clearly the right thing
to do.
Cc: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99265
The current message sounds like a small warning, clarify that it can
result in lack of presentation support and application crashes.
v2: add "if they do" (Bas)
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98263
Signed-off-by: Andres Rodriguez <andresx7@gmail.com>
Acked-by: Jason ekstrand <jason@jlekstrand.net>
Acked-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
In situations where libdrm_amdgpu and mesa are installed to the same
location, the mesa installed headers will take precedence over the git
source headers.
This is due to the AMDGPU_CFLAGS containing the install directory.
This situation can cause build errors if the git version of a header is
newer than the currently installed version of a header (e.g. git pull
updates vulkan.h)
Note: using the same install prefix for mesa and libdrm is probably a
common occurrence since it is described in the radeonBuildHowTo wiki:
https://www.x.org/wiki/radeonBuildHowTo/
v2: added sign-off
Signed-off-by: Andres Rodriguez <andresx7@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
This should fix a coverity defect.
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
PresentPixmap only works if the pixmap depth matches with the
window depth, otherwise it returns a BadMatch protocol error.
Even if the depths match, the result won't look correctly
if the VDPAU RGB component order doesn't match the X11 one so
we only allow the X11 format.
For other buffers we copy them to a buffer which is send to X.
v2: only send buffers with format VDP_RGBA_FORMAT_B8G8R8A8
v3: reword commit message
v4: add comment explaining the code
Signed-off-by: Nayan Deshmukh <nayan26deshmukh@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
At least on VI, texture gather doesn't work with a 24_8 data format, so
use 8_8_8_8 and a modified swizzle instead.
A bit of background: When creating a GL_STENCIL_INDEX8 texture, we select
the X24S8 pipe format because we don't support stencil-only render targets
properly. With mip-mapping this can lead to a setup where the tiling is
incompatible with stencil texturing, and a flushed stencil texture is
used. For the flushed stencil, a literal X24S8 is used because there were
issues with an 8bpp DB->CB copy.
Longer term, it would be good if we could get away from these workarounds,
i.e. properly support an S8 format for stencil-only rendering and flushed
stencil. Since stencil texturing is somewhat rare, it's not a high
priority.
Fixes GL45-CTS.texture_cube_map_array.sampling.
Cc: 17.0 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Acked-by: Edward O'Callaghan <funfunctor@folklore1984.net>
When the attachment type is NONE (att->Type),
FRAMEBUFFER_ATTACHMENT_OBJECT_TYPE should be NONE always.
Note that technically, the current behaviour follows the spec. From
OpenGL 4.5 spec, Section 9.2.3 "Framebuffer Object Queries":
"If the value of FRAMEBUFFER_ATTACHMENT_OBJECT_TYPE is NONE, then
either no framebuffer is bound to target; or the default
framebuffer is bound, attachment is DEPTH or STENCIL, and the
number of depth or stencil bits, respectively, is zero."
Reading literally this paragraph, for the default framebuffer, NONE
should be only returned if attachment is DEPTH and STENCIL without
being allocated.
But it doesn't makes too much sense to return DEFAULT_FRAMEBUFFER if
the attachment type is NONE. For example, this can happens if the
attachment is FRONT_RIGHT run on monoscopic mode, as that attachment
is only available on stereo mode.
With the current behaviour, defensive querying of the object type
would not work properly. So you could query the object type checking
for NONE, get DEFAULT_FRAMEBUFFER, and then get and INVALID_OPERATION
when requesting other pnames (like RED_SIZE), as the real attachment
type is NONE.
This fixes:
GL45-CTS.direct_state_access.framebuffers_get_attachment_parameters
v2: don't change the behaviour for att->Type != GL_NONE, as caused
some ES CTS regressions
v3: simplify condition (Iago)
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
This commit makes si_update_poly_offset set poly_offset to NULL if
uses_poly_offset is false. This way poly_offset either points into the
currently queued rasterizer, or it is NULL.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99451
Cc: "13.0 17.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Since _mesa_ClampColor properly checks for support of the API function
now, it's meta callers need to check support as well.
Fixes: 963311b71f ("mesa/main: fix version/extension checks in _mesa_ClampColor")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99401
Tested-by: Mark Janes <mark.a.janes@intel.com>
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Cc: "17.0" <mesa-stable@lists.freedesktop.org>
Here we remove the single use of this field in gl_linked_shader
which allows us to move the field out of gl_shader_info
While we are at it we rewrite link_xfb_stride_layout_qualifiers()
to be more clear.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
There is no reason for this to be in the shared gl_shader_info or
to copy it to gl_program at the end of linking (its already there).
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
This is only used by gl_linked_shader as a temp during linking
so use a temp there instead.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
This is only used by gl_linked_shader as a temp during linking
so use a temp there instead.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
This is only used by gl_linked_shader as a temp during linking
so use a temp there instead.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
This is never used in gl_linked_shader other than as a temp
during linking so just use a temp instead.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
We also move EarlyFragmentTests out of the gl_shader_info struct
as it is now only used by gl_shader.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
There is no need to go via the pointer in nir_shader. This change
is required for the shader cache as we don't create a nir_shader.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
This fixes the build on ppc/s390.
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Cc: "17.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
We only need to set it when linking was successful and the program
being linked is currently active.
The programs_in_use mask is just used as a flag for now but in
a future change we will use it to update the CurrentProgram array.
V2: make sure to flush vertices before linking (suggested by Marek)
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
A later patch will result in SSO programs calling this helper
per gl_program rather than per gl_shader_program.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
We also move NumProgramResourceList at the same time.
GLES does interface validation on SSO at runtime so we need to move
this to be able to switch to storing gl_program pointers in
CurrentProgram.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
This allows us to cleanup the functions that pass this count around,
but more importantly we will be able to call the uniform linking
functions from that backends linker without having to pass this
information to the backend directly via Driver.LinkShader().
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Currently this just breaks up the linking code a bit but in the
future i965 will call this from the backend via Driver.LinkShader()
so that we can do NIR optimisations before assigning uniform
locations.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Blits do not need any special treatment as the target buffer
object is added to render cache just as one does for normal draw.
Color clears and resolves in turn require explicit "end of pipe
synchronization". It is not clear what this means exactly but the
assumption is that render cache flush with command stream stall
should be sufficient.
Signed-off-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Lionel Landwerlin
Marek Olšák
Philipp Zabel
Emil Velikov
Samuel Pitoiset
Tapani Pälli
Elie TOURNIER
Jason Ekstrand
Anuj Phogat
Chad Versace
Andres Rodriguez
Nayan Deshmukh
Nicolai Hähnle
Alejandro Piñeiro
Zachary Michaels
Timothy Arceri
Dave Airlie
Topi Pohjolainen