For loops which condition is false on the first iteration
iteration count was falsely calculated under the assumption
that loop's condition is true until it becomes false, meaning
it's true at least one time.
Now such loops are reported as having 0 iteration.
Similar to the fix e71fc7f2 done in NIR.
Fixes tests/shaders/glsl-fs-loop-while-false-02.shader_test
Signed-off-by: Danylo Piliaiev <danylo.piliaiev@globallogic.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
This commit removes the GLSL dependency in TTN by manually recording
the textures used and calling nir_lower_samplers
instead of its GL counterpart.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
Lowering samplers is needed to produce NIR that can actually be
consumed by some gallium drivers, so it doesn't make sense to
to keep it only in the GLSL code.
This commit introduces nir_lower_samplers to compiler/nir,
while maintains the GL-specific function too.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
This fixes a memory leak in the flush code:
Direct leak of 128 byte(s) in 1 object(s) allocated from:
#0 in __interceptor_realloc .../gcc-8.3.0/libsanitizer/asan/asan_malloc_linux.cc:105
#1 in si_buffer_do_flush_region src/gallium/drivers/radeonsi/si_buffer.c:573
#2 in si_buffer_flush_region src/gallium/drivers/radeonsi/si_buffer.c:608
#3 in si_buffer_flush_region src/gallium/drivers/radeonsi/si_buffer.c:597
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
This patch partially reverts 20294dc ("mesa: Enable asm unconditionally, ...")
Android makefile build logic needs to disable assembler optimization
in 32bit builds to avoid text relocations for libglapi.so shared
Fixes the following build error with Android x86 32bit target:
[ 0% 4/477] target SharedLib: libglapi (out/target/product/x86/obj/SHARED_LIBRARIES/libglapi_intermediates/LINKED/libglapi.so)
FAILED: out/target/product/x86/obj/SHARED_LIBRARIES/libglapi_intermediates/LINKED/libglapi.so
...
prebuilts/gcc/linux-x86/x86/x86_64-linux-android-4.9/x86_64-linux-android/bin/ld: warning: shared library text segment is not shareable
prebuilts/gcc/linux-x86/x86/x86_64-linux-android-4.9/x86_64-linux-android/bin/ld: error: treating warnings as errors
clang-6.0: error: linker command failed with exit code 1 (use -v to see invocation)
Fixes: 20294dc ("mesa: Enable asm unconditionally, now that gen_matypes is gone.")
Signed-off-by: Mauro Rossi <issor.oruam@gmail.com>
Acked-by: Eric Engestrom <eric@engestrom.ch>
The codegen handles it and it adds the correct casts. This fixes
a bunch of LLVM validation errors when enabling Wave32 for compute.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Load a 32-bit value then convert to 1-bit. Convert 1-bit to 32-bit
value, then Store it.
These cases started to appear when we changed Anvil to use derefs for
shared memory.
v2: Use `bit_size` in a couple of places we were missing. (Jason)
Reassign `value` instead of `src[0]`. (Jason)
Fixes: 024a46a407 ("anv: use derefs for shared memory access")
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This reverts commit c0504569ea. Now that
we're doing interpolation lowering in NIR, we can continue to stride the
FS input registers directly in the brw_fs_nir code like we did before.
This fixes SIMD32 fragment shaders which broke because lower_simd_width
depended on the 0 stride to split PLN instructions correctly.
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
This commit does two things. First, it simplifies the way we compute
the FB write group bit. There's no reason to use a ternary because
inst->group / 16 can only be 0 or 1. Second, it fixes an order-of-
operations bug where the ternary wasn't selecting between (1 << 11) and
0 but between (1 << 11) and 0 | brw_dp_write_desc(...).
Fixes: 0d9648416 "intel/compiler: Use generic SEND for Gen7+ FB writes"
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Utgard PP is vec4 architecture, so lowering phis to scalars
increases instruction count and potentially interferes with
spilling.
Tested-by: Andreas Baierl <ichgeh@imkreisrum.de>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
For render formats, update fd2_pipe2color to only work with HW supported
render formats, and remove the format whitelist is_format_supported. This
patch enables float render formats (which work).
For vertex/texture formats, use a generic function which translates using
the bitsize of the channels. Since we fake support for some vertex formats,
check for these in is_format_supported to avoid enabling them as sampler
formats.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Rob Clark <robdclark@chromium.org>
Use fd_gmem_restore_format() to avoid trying to use unsupported Z24S8/Z16
render formats for gmem restore.
Also apply this change to gmem2mem so it doesn't depend on fd2_pipe2color
working with depth formats.
gmem2mem/mem2gmem also doesn't need to use the swap/swizzle, since dst/src
formats are the same.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Rob Clark <robdclark@chromium.org>
Fixes failures in the following deqp tests:
dEQP-GLES2.functional.polygon_offset.*
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Fixes failures in the following deqp tests:
dEQP-GLES2.functional.fragment_ops.*src_alpha_saturate*
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
The fdph opcode is not supported.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Fixes the following deqp test:
dEQP-GLES2.functional.shaders.builtin_variable.pointcoord
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Some instructions generated by int/bool float lowering need to be lowered
by opt_algebraic.
Fixes: 43dbd7d6
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Utgard PP has vector fcsel operation, but its condition is scalar. Add
filtering callback that checks whether {b,f}csel condition is not scalar
to lower {b,f}csel to scalar only in this case.
Reviewed-by: Qiang Yu <yuq825@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Set of opcodes doesn't have enough flexibility in certain cases. E.g.
Utgard PP has vector conditional select operation, but condition is always
scalar. Lowering all the vector selects to scalar increases instruction
number, so we need a way to filter only those ops that can't be handled
in hardware.
Reviewed-by: Qiang Yu <yuq825@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
In particular, it would be nice for failed debug_assert() msgs to show
up in logcat.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Kristian H. Kristensen <hoegsberg@chromium.org>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
This appears to work fine (with the additional constraint of keeping the
indirect load in the same block that a0.x was loaded).
We can probably lift this restriction on earlier gens after testing.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Need to use ir3_instr_set_address(), otherwise the instruction might not
get added to the indirects table. This becomes a problem when we turn
on copy propagation for relative accesses, as check_instr() in the sched
pass won't realize there is an indirect consumer of address register
load that is ready to be scheduled.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
An instruction can reference only a single address register value.
Add an assert to catch bugs.
Also, address value should also be local to the same block as the
instruction.
(The one spot where changing the instruction address is actually legit
needs to clear the address first.)
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
After the next patch enabling copy propagation for relative sources,
we'll need to dereference the n'th src in valid_flags(), so we actually
need to swap the sources before calling valid_flags().
But the logic was already a bit cumbersome, so move it into a helper
function.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
The live_values and use_count was not being properly updated. This
starts triggering problems with the next patch, where we allow copy
propagation for RELATIV access.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Move the constant part of the indirect offset into nir intrinsic base.
When we have multiple indirect accesses with different constant offsets,
this lets other opt passes clean up things to use a single address
register value.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Now that spilling ops can be inserted into existing instructions, it
makes sense to increase cost to spill registers that would cause the
creation of a new instruction.
Experimental results showed that penalizing too much due to this caused
worse results, however it is beneficial as a tie resolver between
registers with the same number of components.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Reviewed-by: Vasily Khoruzhick <anarsoul@gmail.com>
Avoid creating unnecessary instructions for the load/store temp nodes
when not required, to further reduce register pressure.
The store_temp operation seems to be unable to do any spilling.
At least the offline shader seems to never output instructions accessing
swizzled components, and attempting to output that in ppir results in
errors. So, force spilled registers to allocate a full vec4 register.
This seems to be the optimal way as it is possible to always keep stores
and temps in a single instruction that can be pipelined.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Reviewed-by: Vasily Khoruzhick <anarsoul@gmail.com>
One ssa created in the spillinc code in ppir_update_spilled_src was not
properly being marked 'spilled', which made it a candidate for future
spilling attempts.
Since it was being inserted by the spilling code itself, let's mark it
unspillable to avoid an infinite spilling loop.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Reviewed-by: Vasily Khoruzhick <anarsoul@gmail.com>
Shaders must not attempt to write to the register files in the last
three instructions, but that doesn't include the magic registers:
nop ; nop ; thrsw; ldtmu.- *** ERROR ***
nop ; nop
nop ; nop
v2: Simplify validation rules. (Eric Anholt)
v3: Adjust validation even more. (Eric Anholt)
Reviewed-by: Eric Anholt <eric@anholt.net>
KWin was able to get NULL-context in the call
intelUnbindContext. But a call _mesa_glthread_finish
is not resistent to such case.
Case can be catched with steps:
1. Create both glx and egl contexts
2. Make glx as current
3. Make egl as current
4. Reset glx context
5. Make egl as current
Solution adds proper finishing of glthread-context
(context will be taken from the requested dri-context
for unbinding, but not from the saved current context).
Piglit-test: https://gitlab.freedesktop.org/mesa/piglit/merge_requests/87
Cc: 19.1 19.2 <mesa-stable@lists.freedesktop.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=110814
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111271
Fixes: dca36d5516 (i965: Implement threaded GL support)
Signed-off-by: Sergii Romantsov <sergii.romantsov@globallogic.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Without this, invariant qualifiers don't do anything. Together with a
fix to the game, this fixes flickering in No Man's Sky.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
For radeonsi, we will prefer the NIR pass as it'll generate better code
(some index calculation and a single load vs. a load, then index
calculation, then another load) and oftentimes NIR optimization can kick
in and make all the access indices constant.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
This prevents regressions when disabling indirect lowering. Sometimes
the only use of an input array was copying it to the array created by
nir_lower_io_to_temporaries, and without lowering indirects we wouldn't
have eliminated the temporary array until after linking, which was too
late to remove unused code in the producer.
No shader-db changes with radeonsi NIR.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Setup a constant global variable that LLVM will stick in a .rodata
section and generate PC-relative loads for.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
We usually use these counts as a simple way to figure out if a change
reduces the number of instructions or shrinks an instruction. However,
since .rodata sections aren't executed, we shouldn't be counting their
size for this analysis. Make the linker return the total executable
size, and use it to report the more useful size in both drivers.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Removing GL_FRAMEBUFFER_FLIP_Y_MESA token from glheader.h as it is now
provided by glext.h
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Sync extension spec of MESA_framebuffer_flip_y to what has been merged
upstream in the GL registry. Update now carries the accepted GL
extension no.
v2: split GL headers update off to separate commit
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Integrating headers from upstream registry [0] master branch. Effective
GL registry commit integrated:
9d534f9312e56c72df763207e449c6719576fd54
Keeping the following quirks local to Mesa:
- glext.h: BUILDING_MESA guard (see !1492)
- glxext.h: glXQueryGLXPbufferSGIX: 'int' return type (Mesa) vs while
'void' (GL registry)
- glxext.h: GLX_RENDERER_ID_MESA is still expected by some mesa tests,
even though its token has been removed from the spec (see
docs/specs/MESA_query_renderer.spec)
- glxext.h: glXGetTransparentIndexSUN / PFNGLXGETTRANSPARENTINDEXSUNPROC
argument pTransparentIndex has type 'unsigned long *' (Mesa) vs. 'long
*' (GL registry)
[0] https://github.com/KhronosGroup/OpenGL-Registry
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Zhu, James
Leo Liu
Danylo Piliaiev
Timur Kristóf
Gert Wollny
Mauro Rossi
Samuel Pitoiset
Caio Marcelo de Oliveira Filho
Jason Ekstrand
Vasily Khoruzhick
Jonathan Marek
Rob Clark
Erico Nunes
Jose Maria Casanova Crespo
Sergii Romantsov
Connor Abbott
Heinrich Fink
Hal Gentz
Vinson Lee