This will allow us to make use of the selection control support in
spirv and the GL support provided by EXT_control_flow_attributes.
Note this only supports if-statements as we dont support switches
in NIR.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108841
This will allow us to make use of the loop control support in
spirv and the GL support provided by EXT_control_flow_attributes.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108841
On Intel, we have both bindless and bindful and we'd like to use them at
the same time if we can so we need to be able to distinguish at the NIR
level between the two. This also fixes nir_lower_tex to properly handle
bindless in its tex_texture_size and get_texture_lod helpers.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
This lowering isn't needed for RADV because AMDGCN has two
instructions. It will be disabled for RADV in an upcoming series.
While we are at it, factorize a little bit.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Values inside the offsets parameter of textureGatherOffsets are required to be
constants in the range of [GL_MIN_PROGRAM_TEXTURE_GATHER_OFFSET,
GL_MAX_PROGRAM_TEXTURE_GATHER_OFFSET].
As this range is never outside [-32, 31] for all existing drivers inside mesa,
we can simply store the offsets as a int8_t[4][2] array inside nir_tex_instr.
Right now only Nvidia hardware supports this in hardware, so we can turn this
on inside Nouveau for the NIR path as it is already enabled with the TGSI one.
v2: use memcpy instead of for loops
add missing bits to nir_instr_set
don't show offsets if they are all 0
v3: default offsets aren't all 0
v4: rename offsets -> tg4_offsets
rename nir_tex_instr_has_explicit_offsets -> nir_tex_instr_has_explicit_tg4_offsets
Signed-off-by: Karol Herbst <kherbst@redhat.com>
This reverts commit db57db5317. When
building IR, nothing is really immutable and, since C has no concept of
constness propagating beyond the first pointer, we have to be vary
careful with how we use it. To just throw const into a function like
this is a lie.
Instead, we should just drop the unneeded const in spirv_to_nir which
this commit does along with the revert.
This pass was originally written for lowering TCS output reads and
writes but it is also applicable just about anything including UBOs,
SSBOs, and shared variables.
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
It's just a 32-bit index and offset. We're going to want to use it in
GL as well so stop talking about Vulkan.
Reviewed-by: Kristian H. Kristensen <hoegsberg@chromium.org>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
v2: (all from Jason)
Reuse existing function for the end of the block combinations.
Check the SSA values are coming from the right place in tests.
Document the case when the store to array_deref is reused.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Oftentimes various nir shaders after lowering will be the same, or
almost the same. For example, this can happen when the same shader is
linked with different shaders to form different pipelines and
cross-stage optimizations don't kick in to change it. We want to avoid
running the backend twice on these shaders. We were already doing this
with radeonsi, but we were storing a few extra pieces of information
that made this much less effective compared to TGSI. The worse offender
by far was the program name, which caused most of the cache misses. This
pass strips out these pieces of information, controlled by the NIR_STRIP
debug env variable.
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This adds support to loop analysis for loops where the induction
variable is compared to the result of min(variable, constant).
For example:
for (int i = 0; i < imin(x, 4); i++)
...
We add a new bool to the loop terminator struct in order to
differentiate terminators with this exit condition.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
In order to stop continuously partially unrolling the same loop
we add the bool partially_unrolled to nir_loop, we add it here
rather than in nir_loop_info because nir_loop_info is only set
via loop analysis and is intended to be cleared before each
analysis. Also nir_loop_info is never cloned.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
This detects an induction variable used as an array index to guess
the trip count of the loop. This enables us to do a partial
unroll of the loop, which can eventually result in the loop being
eliminated.
v2: check if the induction var is used to index more than a single
array and if so get the size of the smallest array.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Instead of trusting the caller to already have created a softfp64
function shader and added all its functions to our shader, we simply
take the softfp64 shader as an argument and do the function inlining
ouselves. This means that there's no more nasty functions lying around
that the caller needs to worry about cleaning up.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This pulls the guts of function inlining into a builder helper so that
it can be used elsewhere. The rest of the infrastructure is still
needed for most inlining cases to ensure that everything gets inlined
and only ever once. However, there are use-cases where you just want to
inline one little thing. This new helper also has a neat trick where it
can seamlessly inline a function from one nir_shader into another.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The lowering we do for 64-bit instructions can cause a single NIR ALU
instruction to blow up into hundreds or thousands of instructions
potentially with control flow. If loop unrolling isn't aware of this,
it can unroll a loop 20 times which contains a nir_op_fsqrt which we
then lower to a full software implementation based on integer math.
Those 20 invocations suddenly get a lot more expensive than NIR loop
unrolling currently expects. By giving it an approximate estimate
function, we can prevent loop unrolling from going to town when it
shouldn't.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
We already have one internally for int64 but we don't have a similar one
for doubles so we'll have to make one.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This is set to True only for numeric conversion opcodes.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Not complete, mostly just adding things as I encounter them in CTS. But
not getting far enough yet to hit most of the OpenCL.std instructions.
Anyway, this is better than nothing and covers the most common builtins.
v2: add hadd proof from Jason
move some of the lowering into opt_algebraic and create new nir opcodes
simplify nextafter lowering
fix normalize lowering for inf
rework upsample to use nir_pack_bits
add missing files to build systems
v3: split lines of iadd/sub_sat expressions
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Note that locations can be set in different units, and the multiplier
argument caters to supporting these different units. For example,
st_glsl_to_nir uses dwords (4 bytes) so the multiplier should be 4,
while tgsi_to_nir uses bytes, so the multiplier should be 16.
Signed-Off-By: Timur Kristóf <timur.kristof@gmail.com>
Tested-by: Andre Heider <a.heider@gmail.com>
Tested-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
The nir_lower_uniforms_to_ubo function is useful outside of
mesa/state_tracker, and in fact is needed to produce NIR for
drivers that have the PIPE_CAP_PACKED_UNIFORMS capability.
Signed-Off-By: Timur Kristóf <timur.kristof@gmail.com>
Tested-by: Andre Heider <a.heider@gmail.com>
Tested-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
When we have a larger sampler index, we get into the "high sampler"
scenario and need an instruction header. Even in SIMD8, this pushes the
instruction over the sampler message size maximum of 11 registers.
Instead, we have to lower TXD to TXL.
Fixes: cb98e0755f "intel/fs: Support min_lod parameters on texture..."
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
On Gen 8 and 9, "mul" instruction supports 64 bit destination type. We
can reduce our 64x64 int multiplication from 4 instructions to 3.
Also instead of emitting two mul instructions, we can emit single mul
instuction and extract low/high 32 bits from 64 bit result for
[i/u]mulExtended
v2: 1) Allow lower_mul_high64 to use new opcode (Jason Ekstrand)
2) Add lower_mul_2x32_64 flag (Matt Turner)
3) Remove associative property as bit size is different (Connor
Abbott)
v3: Fix indentation and variable naming convention (Jason Ekstrand)
Signed-off-by: Sagar Ghuge <sagar.ghuge@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This will allow the options to be visible under nir_shader->options,
which will allow the gallium state_tracker to use the driver preferred
settings during glsl_to_nir.
Suggested-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This is useful for r600 since there the abs source modifier is not supported
for ops with three sources
v2: Use correct logic to enable lowering to abs source mod (Eric Anhold)
Signed-off-by: Gert Wollny <gw.fossdev@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
The memory layout associated with this format would be:
Byte: 0 1 2 3
Component: V U Y X
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
On GLSL that info is set as a layout qualifier when redeclaring
gl_FragCoord, so somehow tied to a specific variable. But in practice,
they behave as a global of the shader. On ARB programs they are set
using a global OPTION (defined at ARB_fragment_coord_conventions), and
on SPIR-V using ExecutionModes, that are also not tied specifically to
the builtin.
This patch moves that info from nir variable and ir variable to nir
shader and gl_program shader_info respectively, so the map is more
similar to SPIR-V, and ARB programs, instead of more similar to GLSL.
FWIW, shader_info.fs already had pixel_center_integer, so this change
also removes some redundancy. Also, as struct gl_program also includes
a shader_info, we removed gl_program::OriginUpperLeft and
PixelCenterInteger, as it would be superfluous.
This change was needed because recently spirv_to_nir changed the order
in which execution modes and variables are handled, so the variables
didn't get the correct values. Now the info is set on the shader
itself, and we don't need to go back to the builtin variable to set
it.
Fixes: e68871f6a ("spirv: Handle constants and types before execution
modes")
v2: (Jason)
* glsl_to_nir: get the info before glsl_to_nir, while all the rest
of the info gathering is happening
* prog_to_nir: gather the info on a general info-gathering pass,
not on variable setup.
v3: (Jason)
* Squash with the patch that removes that info from ir variable
* anv: assert that OriginUpperLeft is true. It should be already
set by spirv_to_nir.
* blorp: set origin_upper_left on its core "compile fragment
shader", not just on some specific places (for this we added an
helper on a previous patch).
* prog_to_nir: no need to gather specifically this fragcoord modes
as the full gl_program shader_info is copied.
* spirv_to_nir: assert that we are a fragment shader when handling
this execution modes.
v4: (reported by failing gitlab pipeline #18750)
* state_tracker: update too due changes on ir.h/gl_program
v5:
* blorp: minor change after change on previous patch
* radeonsi: update due this change.
v6: (Timothy Arceri)
* prog_to_nir: remove extra whitespace
* shader_info: don't use :1 on origin_upper_left
* glsl: program.fs.origin_upper_left/pixel_center_integer can be
move out of the shader list loop
Patch adds nir_lower_tex_options as parameter to sample_plane so that
we don't need to extend nir_tex_instr for this.
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
With OpenCL some system values match the address bits, but in GLSL we also
have some system values being 64 bit like subgroup masks.
With this it is possible to adjust the builder functions so that depending
on the bit_sizes the correct bit_size is used or an additional argument is
added in case of multiple possible values.
v2: validate dest bit_size
v3: generate hex values in python code
remove useless imports
rename and move bit_sizes
v4: add 1 to legal bit_sizes for front_face
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
v2: rename nir_var_global to nir_var_mem_global
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Passes' function names, separated by comma, listed in NIR_SKIP
environment variable will be skipped in debug mode. The mechanism is
hooked into the _PASS macro, like NIR_PRINT.
The extra macro NIR_SKIP is available as a developer convenience, to
skip at pointer other than the passes entry points.
v2: Fix typo in NIR_SKIP macro. (Bas)
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
From @jekstrand's nir-1-bit-bool branch, with improved ior/inot lowering.
ior: fmax instead of fadd allows removing the fsat.
inot: seq(x, 0) can be better than fsub(1, x). On a2xx, it works better
with the scalar instruction set.
Reviewed-by: Jonathan Marek <jonathan@marek.ca>