Do not assume thrd_t to be a pointer or integer, as the C11 standard tells us:
thrd_t: implementation-defined complete object type identifying a thread
At https://en.cppreference.com/w/c/thread
So we always return the thread creation return code instead of thrd_t value, and judge the return
code properly.
Signed-off-by: Yonggang Luo <luoyonggang@gmail.com>
Reviewed-by: Jesse Natalie <jenatali@microsoft.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15087>
Currently this just has wait, but in order to get the right answer
for vulkan partial, lavapipe/llvmpipe need to pass a partial flag
through here in the future.
This just changes the API so that's possible.
v2: use an enum (zmike)
Acked-by: Ilia Mirkin <imirkin@alum.mit.edu>
Acked-By: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15009>
Instead of using actual sample count as parameter, we only use a bool
to indicate if the target is multi sample. This is because we don't
know the sample count when glGetInternalformativ() case.
Reviewed-by: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14362>
GLES2 drivers are allowed to reject some GLSL constructs, like dynamic
loop bounds (which neither i915g nor vc4 can fully support), but gallium
hasn't had any way to trigger a link failure. Add a return msg to the
finalize_nir hook, which is called at the end of GLSL linking, and use
that. This means that some other callers of finalize need to do something
with the msg, and we (for now) just throw it away.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12218>
We would like draw-only display lists to have immutable draw info and
this is the only GL non-draw state in pipe_draw_info (not counting
view_mask).
It also allows removing some code from draw_vbo for tessellation.
Reviewed-By: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12351>
As part of adding support for inline uniforms in Iris, I was going to
add a finalize_nir hook. I went looking to see how other drivers use
the "optimize" parameter, and I discovered that *nobody* uses it at all.
v2: Fix typo in commit message. Noticed by Mike.
Reviewed-By: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12317>
The u_resource_vtbl indirection is going to be removed.
Reviewed-By: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Acked-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10659>
the only case in which this is nonzero is if a multidraw gets split by the frontend,
i.e., mesa core, and in all other cases it can be ignored. the value can also be ignored
for all indirect draws, though it seems many (most?) gallium drivers are not aware of this
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10166>
this moves index_bias into the multidraw struct, enabling draws where the value
changes to be merged; the draw_info struct member is renamed and moved to the end
of the struct for tc use
u_vbuf still has some checks to split draws if index_bias changes, maybe
this can be removed at some point?
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10166>
There are a few places (mainly u_threaded_context) that do:
set_vertex_buffers(...);
for (i = 0; i < count; i++)
pipe_resource_reference(&buffers[i].resource.buffer, NULL);
set_vertex_buffers increments the reference counts while the loop
decrements them.
This commit eliminates those reference count changes by adding a parameter
into set_vertex_buffers that tells the callee to accept all buffers
without incrementing the reference counts.
AMD Zen benefits from this because it has slow atomics if they come from
different CCXs.
Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8298>
Instead of calling this functions again to unbind trailing slots,
extend it to do it when binding. This reduces CPU overhead.
A lot of drivers ignore "start" and always unbind all slots after "count".
Such drivers don't need any changes here.
Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8298>
Instead of calling this function again to unbind trailing slots,
extend it to do it when images are being set. This reduces CPU overhead.
Only st/mesa benefits.
Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8298>
Instead of calling this functions again to unbind trailing slots,
extend it to do it as part of the call that sets vertex buffers.
This reduces CPU overhead. Only st/mesa benefits from this.
Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8298>
We often do this:
pipe->set_constant_buffer(pipe, shader, slot, &cb);
pipe_resource_reference(&cb->buffer, NULL);
That results in atomic increment in set_constant_buffer followed by
atomic decrement after set_constant_buffer. This new interface
eliminates those atomics.
For the case above, this should be used instead:
pipe->set_constant_buffer(pipe, shader, slot, true, &cb);
cb->buffer = NULL; // if cb is not a local variable, else do nothing
AMD Zen benefits from this. The perf improvement is ~3% for Viewperf13/Catia.
Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8298>
It's hooked up in all the pipe wrapper drivers, and all the
frontends except a couple places in glx/xlib.
This enables a more efficient path for drivers which use
swrast's Present, but hardware rendering (e.g. d3d12, zink).
Reviewed-by: Dave Airlie <airlied@redhat.com>
Acked-by: Marek Olák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8045>
Essentially rename multi_draw to draw_vbo and remove start and count
from pipe_draw_info.
This is only an interface change. It doesn't add multi draw support
anywhere.
Acked-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7441>
This removes 8 bytes from pipe_draw_info (think u_threaded_context)
and a lot of info->indirect pointer indirections.
Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7441>
This removes some overhead from tc_draw_vbo and increases the maximum number
of draws per batch from 153 to 192 in u_threaded_context.
Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7441>
For lavapipe interface to llvmpipe there is a need to retrieve per-level
info, so this seems like the best interface to use for it.
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6639>
this adds a new pipe cap that drivers can support which enables passing buffer
clears with scissor test enabled through to be handled by the driver instead
of having mesa draw a quad
also adjust all existing clear() hooks to have the new parameter
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Vasily Khoruzhick <anarsoul@gmail.com>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4310>
To make PIPE_FORMATs usable from non-gallium parts of Mesa, I want to
move their helpers out of gallium. Since u_format used
util_copy_rect(), I moved that in there, too.
I've put it in a separate directory in util/ because it's a big chunk
of related code, and it's not clear to me whether we might want it as
a separate library from libmesa_util at some point.
Closes: #1905
Acked-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
On Windows, p_atomic_inc_return returns an unsigned long long rather
than the type the pointer refers to, so let's make sure we cast the
result to the right type. Otherwise, we'll trigger a warning about
the wrong format-string for the type.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
This is a relatively minimal change to adjust all the gallium interfaces
to use bool instead of boolean. I tried to avoid making unrelated
changes inside of drivers to flip boolean -> bool to reduce the risk of
regressions (the compiler will much more easily allow "dirty" values
inside a char-based boolean than a C99 _Bool).
This has been build-tested on amd64 with:
Gallium drivers: nouveau r300 r600 radeonsi freedreno swrast etnaviv v3d
vc4 i915 svga virgl swr panfrost iris lima kmsro
Gallium st: mesa xa xvmc xvmc vdpau va
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Due to asynchronous execution, it's not clear which of the draws the state
may refer to.
This also works around an issue encountered with radeonsi where dumping
the driver state itself caused a hang.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Without that `GALLIUM_DDEBUG=always kmscube -A` would segfault like
#0 0x0000000000000000 in ()
#1 0x0000ffffa72a3c54 in dri2_get_fence_fd (_screen=0xaaaaed4f2090, _fence=0xaaaaed9ef880) at ../src/gallium/state_trackers/dri/dri_helpers.c:140
#2 0x0000ffffa8744824 in dri2_dup_native_fence_fd (drv=0xaaaaed5010c0, disp=0xaaaaed5029a0, sync=0xaaaaed9ef7c0) at ../src/egl/drivers/dri2/egl_dri2.c:3050
#3 0x0000ffffa87339b8 in eglDupNativeFenceFDANDROID (dpy=0xaaaaed5029a0, sync=0xaaaaed9ef7c0) at ../src/egl/main/eglapi.c:2107
#4 0x0000aaaabd29ca90 in ()
#5 0x0000aaaabd401000 in ()
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
The following race condition could occur in the no-timeout case:
API thread Gallium thread Watchdog
---------- -------------- --------
dd_before_draw
u_threaded_context draw
dd_after_draw
add to dctx->records
signal watchdog
dump & destroy record
execute draw
dd_after_draw_async
use-after-free!
Alternatively, the same scenario would assert in a debug build when
destroying the record because record->driver_finished has not signaled.
Fix this and simplify the logic at the same time by
- handing the record pointers off to the watchdog thread *before* each
draw call and
- waiting on the driver_finished fence in the watchdog thread
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
State trackers will not use the new param directly, but will instead use
a helper in MakeCurrent that does the right thing.
v2: rework the interface
Reviewed-by: Brian Paul <brianp@vmware.com>
Yonggang Luo
Marek Olšák
Dave Airlie
Qiang Yu
Emma Anholt
Ian Romanick
Mike Blumenkrantz
X512
Jesse Natalie
Pierre-Eric Pelloux-Prayer
Karol Herbst
Karol Herbst
Eric Anholt
Timothy Arceri
Kenneth Graunke
Erik Faye-Lund
Ilia Mirkin
Eric Engestrom
Brian Paul
Julien Isorce
Nicolai Hähnle
Guido Günther