Missed out with commit d99135b2e9b(configure: nuke
--with-max-{width,height})
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
The option was deprecated with commit 959e83d6507(clover: Adapt libclc's
INCLUDEDIR and LIBEXECDIR to make use of the new introduced libclc.pc.)
back in 2012 with mesa 9.2.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
Now that we store a copy of the NIR shader, and don't immediately free
it, we can use it in annotations as well.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Previously, we translated into NIR and did all the optimizations and
lowering as part of running fs_visitor. This meant that we did all of
that work twice for fragment shaders - once for SIMD8, and again for
SIMD16. We also had to redo it every time we hit a state based
recompile.
We now generate NIR once at link time. ARB programs don't have linking,
so we instead generate it at ProgramStringNotify time.
Mesa's fixed function vertex program handling doesn't bother to inform
the driver about new programs at all (which is rather mean), so we
generate NIR at the last minute, if it hasn't happened already.
shader-db runs ~9.4% faster on my i7-5600U, with a release build.
v2: Check NirOptions != NULL in ProgramStringNotify(). Don't bother
using _mesa_program_enum_to_shader_stage as we already know it.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
Storing this here is pretty sketchy - I don't know if any driver other
than i965 will want to use it. But this will make it a lot easier to
generate NIR code at link time. We'll probably rework it anyway.
(Ian suggested making nir_assign_var_locations_scalar_direct_first
simply modify the nir_shader's fields, rather than passing pointers
to them. If this stays long term, we should do that. But Jason and
I suspect we'll be reworking this area again in the near future.)
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
This makes it so emit_nir_code() doesn't modify the GLSL IR.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Just build up arrays for src0/src1, and use create_collect()..
Also add back missing .3d flag for 3d/cube textures.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
I noticed some cases where we where trying to copy-propagate indirect
src's into places they cannot go, like 2nd src for cat3 (mad, etc).
Expand out valid_flags() to be aware of relativ flag, and fix up a few
related spots.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
When we get in a scenario where we cannot schedule any more instructions
due to address register conflict, clone the instruction that writes the
address register, and switch the remaining unscheduled users for the
current address register over to the new clone.
This is simpler and more robust than the previous attempt (which tried
and sometimes failed to ensure all other dependencies of users of the
address register were scheduled first).. hint it would try to schedule
instructions that were not actually needed for any output value.
We probably need to do the same with predicate register, although so far
it isn't so heavily used so we aren't running into problems with it
(yet).
Signed-off-by: Rob Clark <robclark@freedesktop.org>
A bit fugly.. try and make this cleaner.. note if we hoist all the
get_addr() out of the loop we can drop the hashtable and just use
create_addr()..
Signed-off-by: Rob Clark <robclark@freedesktop.org>
It probably *should* be an assert, but for now TGSI f/e isn't very good
about dealing w/ CONST vs ABS/NEG. So for debug builds, print a warning
instead of crashing with an assert for now.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Without this, a3xx breaks.. a4xx would too if it had already implemented
support for passing driver params.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
For a normal MAD (ie. not MADSH), if first source is gpr and second
source is const, we can swap the first two sources to avoid needing a
mov instruction.
This gives back the biggest advantage TGSI f/e had over NIR f/e for
common shaders, since TGSI f/e had this logic in the f/e. Note that
doing this in copy-prop step has the advantage that it will also work
for cases like:
MOV TEMP[b], CONST[x]
MAD TEMP[d], TEMP[a], TEMP[b], TEMP[c]
Signed-off-by: Rob Clark <robclark@freedesktop.org>
I guess I was looking too much at how lower_system_values worked when
writing lower_idiv.
Since ttn wasn't emitting load_var for sysvals and the only drivers
using lower_idiv were using ttn, I think nothing was broken as a result.
But might as well fix this before it becomes a problem.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
Originally you had to have one or the other. But actually I don't want
either. (Or rather I want whatever is the minimum # of instructions.)
TODO: not sure where the best place to insert a check that driver hasn't
set *both* lower_negate and lower_sub?
Signed-off-by: Rob Clark <robclark@freedesktop.org>
So far just the system values that freedreno supports, so we may add
more later.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
With TXD we also have the ddx/ddy sources (before the sampler).
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Split out from ttn_tex() since it is kind of a weird instruction that
maps to two NIR opcodes, and it was cleaner this way.
v2: query_levels doesn't take any args
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
We'll need this as well for TXQ. Split this out first to reduce noise
in the next patch.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Since the rest of NIR really would rather have these as variables rather
than registers, create a nir_variable per array. But rather than
completely re-arrange ttn to be variable based rather than register
based, keep the registers. In the cases where there is a matching var
for the reg, ttn_emit_instruction will append the appropriate intrinsic
to get things back from the shadow reg into the variable.
NOTE: this doesn't quite handle TEMP[ADDR[]] when the DCL doesn't give
an array id. But those just kinda suck, and should really go away.
AFAICT we don't get those from glsl. Might be an issue for some other
state tracker.
v2: rework to use load_var/store_var with deref chains
v3: create new "burner" reg for temporarily holding the (potentially
writemask'd) dest after each instruction; add load_var to initialize
temporary dest in case not all components are overwritten
v4: review comments: asserts and use ttn_src_for_indirect() in
ttn_array_deref() so we can drop later patch converting to use vec1 for
addr reg (since ttn_src_for_indirect() handles the imov to vec1 from
tgsi addr component that we want)
v5: rebase: new requirements about parent mem ctx for derefs
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Extract tgsi_dst->Index into a local.. split out from 'gallium/ttn: add
support for temp arrays' for noise reduction..
Signed-off-by: Rob Clark <robclark@freedesktop.org>
We've started using NirOptions != NULL to mean "we're using NIR for this
stage." However, when INTEL_USE_NIR=1, we set it for a bunch of stages
that still use the vec4 backend, and thus definitely aren't using NIR.
For example, if INTEL_USE_NIR=1 we disable the GLSL IR cubemap
normalization pass, even for vertex shaders and geometry shaders. This
is wrong, but breaks a very uncommon case.
When I started deleting GLSL IR for stages where we claimed to be using
NIR, this bug quickly became apparent.
For now, only set it for fragment shaders, and vertex shaders if
brw->scalar_vs is set.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
The disassembly currently has the swizzle after the type for 3src source
operands, and the other way around for 2src. Flip the type and swizzle
around for 3src so that the output matches 2src.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
This function was getting a bit large and unwieldy.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Nothing actually wanted brw_shader fields - we just had to type
shader->base all over the place for no reason.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Now that we're not generating linker errors, we don't actually modify
this.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
These should never happen. Plus, NIR passes really shouldn't be
reporting linker errors - this is past link time.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
We don't actually need a gl_program struct. We only used it to
translate prog->Target (i.e. GL_VERTEX_PROGRAM) to the gl_shader_stage
(i.e. MESA_SHADER_VERTEX). We may as well just pass that.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
I want to use this in some code that doesn't currently include mtypes.h.
It seems like a better place for it anyway.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
This header was originally going to be called pipeline.h, but it got
renamed at the last minute. Make the include guards match.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
prog_to_nir should not modify the incoming Mesa IR program - just
translate it.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Neither the shader nor the key change when doing elts or linear variant, so
this was just annoying (probably mildly useful at some point when we printed
the IR per function too).
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
llvm goes crazy when doing that, using way more memory and time, though there's
probably more to it - this points to a very much similar issue as fixed in
8a9f5ecdb1. In any case I've seen a quite
plain looking vertex shader with just ~50 simple tgsi instructions (but with a
dozen or so such indirect constant buffer lookups) go from a terribly high
~440ms compile time (consuming 25MB of memory in the process) down to a still
awful ~230ms and 13MB with this fix (with llvm 3.3), so there's still obvious
improvements possible (but I have no clue why it's so slow...).
The resulting shader is most likely also faster (certainly seemed so though
I don't have any hard numbers as it may have been influenced by compile times)
since generally fetching constants outside the buffer range is most likely an
app error (that is we expect all indices to be valid).
It is possible this fixes some mysterious vertex shader slowdowns we've seen
ever since we are conforming to newer apis at least partially (the main draw
loop also has similar looking conditionals which we probably could do without -
if not for the fetch at least for the additional elts condition.)
v2: use static vars for the fake bufs, minor code cleanups
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
This is a follow-on fix from the earlier "glsl: allow ForceGLSLVersion
to override #version directives" change. Since we're not changing
the language_version field, we have to check forced_language_version
here.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
In Skylake the order of the arguments for sample messages with the LD
type are u, v, lod, r whereas previously they were u, lod, v, r.
This fixes 144 Piglit tests including ones that directly use
texelFetch and also some using the meta stencil blit path which
appears to use texelFetch in its shader.
v2: Fix sampling 1D textures
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
On Gen7/8 for RAW surface format, the depth field (surf[3]) in surface
state means [30:21] bits of number of entries which is different from
other surface format which uses [26:21] bits field.
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
Emil Velikov
Kenneth Graunke
Matt Turner
Rob Clark
Jason Ekstrand
Nick Sarnie
Ville Syrjälä
Vinson Lee
Roland Scheidegger
Brian Paul
Neil Roberts
Zhenyu Wang
Dave Airlie