In order to handle a 4xMSAA mask (16-bits per sample) increase
the fragment shader API to be 64-bit.
v2: drop pointless if (Roland)
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4122>
There is a race with u_blitter shaders + pipeline shaders (aaline/aapoint)
where the draw bind can cause a pipeline flush which can use bind_fs_state to
be reenters and llvmpipe->fs gets the wrong value. Fix this by only
setting the llvmpipe->fs value after the draw binding is complete.
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4122>
If storing to an integer for lower bit size (i.e. 16-bit uint to
10-bit uint), we need to clamp to the maximum value not truncate.
Fixes:
dEQP-VK.api.copy_and_blit.core.blit_image.all_formats.color.r16_uint.a2b10g10r10_uint_pack32.optimal_optimal_nearest
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4574>
This wires up the front facing value as a sysval, I'd like to
remove the other facing code but I'd need to confirm VMware
don't use it first.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
This adds the hooks between llvmpipe and the gallivm NIR
code, for compute and fragment shaders.
NIR support is hidden behind LP_DEBUG=nir for now until
all the intergration issues are solved
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
To make PIPE_FORMATs usable from non-gallium parts of Mesa, I want to
move their helpers out of gallium. Since u_format used
util_copy_rect(), I moved that in there, too.
I've put it in a separate directory in util/ because it's a big chunk
of related code, and it's not clear to me whether we might want it as
a separate library from libmesa_util at some point.
Closes: #1905
Acked-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
As requested by Tim.
This was generated with:
grep 'PIPE_ARCH_.*_ENDIAN' -rIl | xargs sed -ie 's@PIPE_ARCH_\(.*\)_ENDIAN@UTIL_ARCH_\1_ENDIAN@'g
v2: - add this patch
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
This will allow it to be used as a drop in replacement for
_mesa_little_endian in a number of cases.
v2: - Always define PIPE_ARCH_LITTLE_ENDIAN and PIPE_ARCH_BIG_ENDIAN,
define the one that reflects the host system to 1 and the other to 0
- replace all uses of #ifdef, #ifndef, and #if defined() with #if
and #if ! with PIPE_ARCH_*_ENDIAN
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
This mirrors the vs/gs keys, and will be needed when adding images
support.
The const changes also mirror how the draw code work (as is needed
when we add images)
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
This is why we can't have nice things. I'm sure there's someway
to do this with {0} but I really don't have time for that.
Fixes: 2631fd3b0b ("gallivm: rework lp_build_tgsi_soa to take a struct")
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
The parameters were getting messy and I have to add a few more
for compute shaders, so clean it up before proceeding.
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
This add support for setting shader buffers and passing them
to draw or binding them to the fragment shader jit.
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
this isn't used outside this file.
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
This unifies the explicit rasterization discard as well as the implicit
rasterization disabled logic (which we need for another state tracker),
which really should do the exact same thing.
We'll now toss out the prims early on in setup with (implicit or
explicit) discard, rather than do setup and binning with them, which
was entirely pointless.
(We should eventually get rid of implicit discard, which should also
enable us to discard stuff already in draw, hence draw would be
able to skip the pointless clip and fallback stages in this case.)
We still need separate logic for only null ps - this is not the same
as rasterization discard. But simplify the logic there and don't count
primitives simply when there's an empty fs, regardless of depth/stencil
tests, which seems perfectly acceptable by d3d10.
While here, also fix statistics for primitives if face culling is
enabled.
No piglit changes.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
The tgsi_info.num_tokens fix broke llvmpipe's detection of no-op shaders.
Fix the code to check for num_instructions <= 1 instead.
Fixes: 8fde9429c3 ("tgsi: fix incorrect tgsi_shader_info::num_tokens
computation")
Tested-by: Roland Scheidegger <sroland@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
The new name make the zero-input behavior more obvious. The next
patch adds a new function with different zero-input behavior.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Suggested-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
The comment said it will only represent the lowest 32 regs. This was
not entirely true in practice, since at least on x86 you'll get
masked shifts (unless the compiler could recognize it already and toss
it out). It turns out this actually works out alright (presumably
noone uses it for temp regs) when increasing max sampler views, so
make that behavior explicit.
Albeit it feels a bit hacky (but in any case, explicit behavior there
is better than undefined behavior).
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Once a lp_build_sampler_soa or lp_build_sampler_aos object is created,
it should never be modified. Found by inspection.
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
This probably isn't all that useful for GL, but there are apis where
sample_mask is a valid output even without msaa.
Just discard the pixel if the sample_mask doesn't include the bit for
sample 0.
Reviewed-by: Brian Paul <brianp@vmware.com>
With GALLIVM_DEBUG=perf set, output the relevant stats for shader cache usage
whenever we have to evict shader variants.
Also add some output when shaders are deleted (but not with the perf setting
to keep this one less noisy).
While here, also don't delete that many shaders when we have to evict. For fs,
there's potentially some cost if we have to evict due to the required flush,
however certainly shader recompiles have a high cost too so I don't think
evicting one quarter of the cache size makes sense (and, if we're evicting
based on IR count, we probably typically evict only very few or just one
shader too). For vs, I'm not sure it even makes sense to evict more than
one shader at a time, but keep the logic the same for now.
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
This is mostly mechanical search-and-replace, plus touching up the
macros in u_dump_defines.c manually a bit.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Generally we should do tranpose after conversion, if the format has less than
32 bits per channel (if it has 32 bits, conversion is going to be a no-op
anyway...). This is obviously because there's less vectors to deal with.
Though the advantage for 16 bit formats isn't that big, and in fact with AVX
there isn't really any (as the 32bit unpacks can be done with 256bit, but
the smaller ones cannot, although that would change again with proper AVX2
support).
Only makes sense for 2d and not 1d cases. And to keep things easy, only handle
1,2 and 4 channels (rgbx is just fine).
For rgba unorm8 format the backend conversion sums up to these instruction
totals (not counting the movs for SSE2 due to 2-op syntax - generally every 2
unpacks need an additional mov).
SSE2 AVX
transpose: 32 unpack 16 unpack
untwiddle: 0 8 (128bit low/high permutes)
convert: 16 mul + 16 cvt 8 mul + 8 cvt
32->8bit: 12 pack 8 (128bit extract) + 12 pack
When doing transpose/untwiddle afterwards we get:
convert: 16 mul + 16 cvt 8 mul + 8 cvt
32->8bit: 12 pack 8 (128bit extract) + 12 pack
transpose/untwiddle 12 unpack 12 unpack
So for SSE2, this drops 20 unpacks (total instruction count 76->56)
whereas for AVX it replaces the 16 256bit unpacks with 8 128bit ones
and drops the 8 lo/hi permutes (in total 60->48). (Albeit to be fair,
the permutes could be dropped even when doing the transpose first,
they are extremely pointless but we'd need to be able to tell
lp_build_conv to reorder the vectors, for AVX2 we're going to need to
be able to tell lp_build_conv about ordering in any case.)
(With different ordering going into conversion, it would be possible
to do 4 unpacks + 4 pshufbs instead of 12 unpacks, but that might not
be better, and not all cpus can do it. Proper AVX2 support should eliminate
the 8 128bit extracts, reduce these 12 packs to 6 and the 12 unpacks to 2
pshufb + 2 permq ideally (+ 2 final 128bit extracts).)
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
For rgbx formats, there is no point in doing alpha conversion again (and
with different tranpose even, so llvm can't eliminate it).
Albeit it looks like there's some minimal changes needed in the blend code
(found by code inspection, no test seemed to complain) if we do this -
the blend factors are already sanitized if we have no destination alpha,
however for src_alpha_saturate it looks like it still might make a
difference (note that we forced has_alpha to true before for some formats
and nothing complained, but this seems safer).
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
llvm has _huge_ problems trying to load things like <4 x i8> vectors and
stitching such loads together to form 128bit vectors. My understanding
of the problem is that the type legalizer tries to extend that to
really a <4 x i32> vector and not a <16 x i8> vector with the 4 elements
first then followed by padding, so the shuffles for then combining things
together are more or less impossible - you can in fact see the pmovzxd
llvm generates. Pre-4.0 llvm just gives up on it completely and does a 30+
pextrb/pinsrb sequence instead.
It looks like current llvm has fixed this behavior (my guess would be
due to better shuffle combination and load/shuffle folds), but we can
avoid this by just loading as <1 x i32> values, combine that and only
cast at the end. (I suspect it might also work if we'd pad the loaded
vectors immediately before shuffling them together, instead of directly
stitching 2 such vectors together pairwise before combining the pair.
But this _might_ lose the ability to load the values directly into
their right place in the vector with pinsrd.). But using 32bit values
is probably easier for llvm as it will never give it funny ideas how
the vector should look like.
(This is possibly only a problem for 1x8bit formats, since 2x8bit will
end up fetching 64bit hence only two vectors are stitched together,
not 4, but we use the same strategy anyway.)
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Using bit replication. This path now resembles something which might make
sense. (The logic was mostly copied from llvmpipe fs backend.)
I am not convinced though it is actually faster than SoA sampling (actually
I'm quite certain it's always a loss with AVX).
With SoA it's just shift/mask/cvt/mul for getting the colors, whereas
there's still roughly 3 shifts, 3 or/and per channel for AoS
(i.e. for SoA it's exactly the same as it would be for a rgba8 format,
whereas the extra effort for AoS is significant). The filtering
might still be faster (albeit with FMA the instruction count gets down
quite a bit there on the SoA float filtering path on new cpus). And those
small unorm formats often don't have an alpha channel (which makes things
worse relatively for AoS path).
(This also fixes a trivial bug in the llvmpipe fs code this was derived
from, albeit it was only relevant for 4-bit channels.)
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
simd instruction sets usually have comparisons for equal, not unequal.
So use a different comparison against the mask itself - which also means
we don't need a all-zero as well as a all-one (for the pxor) reg.
Also add code to avoid scalar expansion of i1 values which we definitely
shouldn't do. There's problems with this though with llvm select
interaction, so it's disabled (basically using llvm select instead of
intrinsics may still produce atrocious code, even in cases where we
figured it should not, albeit I think this could probably be fixed
with some better selection of optimization passes, but I have zero
idea there really).
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Applies on top of v3 of Tom's gallivm change.
v2:
- Tom Stellard: Use enums instread of strings.
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Signed-off-by: Aaron Watry <awatry@gmail.com>
CC: Tom Stellard <thomas.stellard@amd.com>
CC: Jan Vesely <jan.vesely@rutgers.edu>
We only did depth clamp when the value was written from the fs.
This is very wrong both for d3d10 and GL, and only passed the
corresponding piglit test due to pure luck (it no longer does
with the enhanced test).
Also, interpolation clamped values to 1.0 always, which can legitimately
happen if depth clip is disabled, so fix that as well (untested).
There is one unresolved issue left, d3d10 always does depth clamping,
whereas GL does not (but does [0,1] clamp instead for fs depth outputs)
- this information isn't in any gallium state object, leave it as-is
for now (though it looks like llvmpipe misses the [0,1] clamp as well).
This (with the previous patch) fixes piglit depth-clamp-range test.
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
The gallium contract would be that bind flags must indicate all possible
bindings a resource might get used, but fact is the mesa state tracker does
not set bind flags correctly, and this is more or less unfixable due to GL.
This caused a bug with piglit arb_uniform_buffer_object-rendering-dsa
since 6e6fd911da - the commit is correct,
but it caused us to miss updates to fs UBOs completely, since the
corresponding buffer didn't have the appropriate bind flag set (thus we
wouldn't check if it is indeed currently bound).
See the discussion about this starting here:
https://lists.freedesktop.org/archives/mesa-dev/2016-June/119829.html
So, update the bind flags when we detect such usage.
Note we update this value for now only in places which matter for us - that
is creating sampler/surface view, or binding constant buffer. There's plenty
more places (setting streamout buffers, vertex/index buffers, ...) where
things can be set with the wrong bind flags, but the bind flags there never
matter.
While here also make sure we only set dirty constant bit when it's a fs
constant buffer - totally doesn't matter if it's vs/gs.
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Use PIPE_SWIZZLE_* everywhere.
Use X/Y/Z/W/0/1 instead of RED, GREEN, BLUE, ALPHA, ZERO, ONE.
The new enum is called pipe_swizzle.
Acked-by: Jose Fonseca <jfonseca@vmware.com>
The blend code would do a conditional assignment based on it, causing valgrind
to complain. Since that variable was actually unused in this case, this
doesn't fix anything but the warning.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94955
Cc: "11.1 11.2" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Brian Paul <brianp@vmware.com>
Only provide a fallback for LLVM 3.3.
One less dependency on LLVM C++ interface.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
They can't actually be 0 (as position is there) but should avoid confusion.
This was supposed to have been done by af7ba989fb
but I accidentally pushed an older version of the patch in the end...
Also prettify slightly. And make some notes about the confusing and useless
fs input "map".
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
compressed textures are very slow because decoding is rather complex
(and because there's no jit code code to decode them too for non-technical
reasons).
Thus, add some texture cache which holds a couple of decoded blocks.
Right now this handles only s3tc format albeit it could be extended to work
with other formats rather trivially as long as the result of decode fits into
32bit per texel (ideally, rgtc actually would decode to more than 8 bits
per channel, but even then making it work for it shouldn't be too difficult).
This can improve performance noticeably but don't expect wonders (uncompressed
is unsurprisingly still faster). It's also possible it might be slower in
some cases (using nearest filtering for example or if there's otherwise not
many cache hits, the cache is only direct mapped which isn't great).
Also, actual decode of a block relies on util code, thus even though always
full blocks are decoded it is done texel by texel - this could obviously
benefit greatly from simd-optimized code decoding full blocks at once...
Note the cache is per (raster) thread, and currently only used for fragment
shaders.
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Generated by running:
git grep -l INLINE src/gallium/ | xargs sed -i 's/\bINLINE\b/inline/g'
git grep -l INLINE src/mesa/state_tracker/ | xargs sed -i 's/\bINLINE\b/inline/g'
git checkout src/gallium/state_trackers/clover/Doxyfile
and manual edits to
src/gallium/include/pipe/p_compiler.h
src/gallium/README.portability
to remove mentions of the inline define.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Acked-by: Marek Olšák <marek.olsak@amd.com>
Pretty trivial, fixes the issue that we're expected to be able to blit
stencil surfaces (as the blit just relies on util blitter code which needs
stencil export to do it).
2 piglits skip->pass, 11 fail->pass
v2: prettify, keep different stencil ref value handling out of depth/stencil
test itself.
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
The callbacks used for getting the dynamic texture/sampler state were using
the jit_context from the generated jit function. This works just fine, however
that way it's impossible to generate separate functions for texture sampling,
as will be done in the next commit. Hence, pass this pointer through all
interfaces so it can be passed to a separate function (technically, it would
probably be possible to extract this pointer from the current function instead,
but this feels hacky and would probably require some more hacks if we'd use
real functions instead of inlining all shader functions at some point).
There should be no difference in the generated code for now.
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Addresses MSVC warnings "result of 32-bit shift implicitly converted to
64 bits (was 64-bit shift intended?)", which can often be symptom of
bugs, but in these cases were all benign.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
We'll need to update gallivm for the interface changes in LLVM 3.6, and
the fewer the number of older LLVM versions we support the less hairy that
will be.
As consequence HAVE_AVX define can disappear. (Note HAVE_AVX meant
whether LLVM version supports AVX or not. Runtime support for AVX is
always checked and enforced independently.)
Verified llvmpipe builds and runs with with LLVM 3.3, 3.4, and 3.5.
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
This is one step to make llvmpipe thread safe as mandated by the OpenGL
standard. Using the global LLVMContext is obviously a problem for
that kind of use pattern. The patch introduces two LLVMContext
instances that are private to an OpenGL context and used for all
compiles. One is put into struct draw_llvm and the other
one into struct llvmpipe_context.
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Signed-off-by: Mathias Froehlich <Mathias.Froehlich@web.de>
2ea923cf57 had the side effect of IR counting
now being done after IR optimization instead of before. Some quick analysis
shows that there's roughly 1.5 times more IR instructions before optimization
than after, hence the effective shader cache size got quite a bit smaller.
Could counter this with an increase of the instruction limit but it probably
makes more sense to count them after optimizations, so move that code.
Reviewed-by: Brian Paul <brianp@vmware.com>
When we had just one module "gallivm" was an appropriate name. But now we have
modules containing all functions for a particular variant, so give it a
corresponding name (this is really just for helping debugging).
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Unused except it was increased for both fs and setup shader variants created.
Probably some leftover from ages ago.
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
The conversion code for srgb was tuned for n x 4x8bit AoS -> 4 x nxfloat SoA
(and vice versa), fix this to handle also 16bit 565-style srgb formats.
Still not really all that generic, things like r10g10b10a2_srgb or
r4g4b4a4_srgb wouldn't work (the latter trivial to fix, the former would not
require more work to not crash but near certainly need some higher precision
calculation) but not needed right now.
The code is not fully optimized for this (could use more direct calculation
instead of expanding to 8-bit range first) but should be good enough.
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
The code re-enabling denorms for small float formats did not recognize
this format due to format handling hacks (mainly, the lp_type doesn't have
the floating bit set).
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Tungsten Graphics Inc. was acquired by VMware Inc. in 2008. Leaving the
old copyright name is creating unnecessary confusion, hence this change.
This was the sed script I used:
$ cat tg2vmw.sed
# Run as:
#
# git reset --hard HEAD && find include scons src -type f -not -name 'sed*' -print0 | xargs -0 sed -i -f tg2vmw.sed
#
# Rename copyrights
s/Tungsten Gra\(ph\|hp\)ics,\? [iI]nc\.\?\(, Cedar Park\)\?\(, Austin\)\?\(, \(Texas\|TX\)\)\?\.\?/VMware, Inc./g
/Copyright/s/Tungsten Graphics\(,\? [iI]nc\.\)\?\(, Cedar Park\)\?\(, Austin\)\?\(, \(Texas\|TX\)\)\?\.\?/VMware, Inc./
s/TUNGSTEN GRAPHICS/VMWARE/g
# Rename emails
s/alanh@tungstengraphics.com/alanh@vmware.com/
s/jens@tungstengraphics.com/jowen@vmware.com/g
s/jrfonseca-at-tungstengraphics-dot-com/jfonseca-at-vmware-dot-com/
s/jrfonseca\?@tungstengraphics.com/jfonseca@vmware.com/g
s/keithw\?@tungstengraphics.com/keithw@vmware.com/g
s/michel@tungstengraphics.com/daenzer@vmware.com/g
s/thomas-at-tungstengraphics-dot-com/thellstom-at-vmware-dot-com/
s/zack@tungstengraphics.com/zackr@vmware.com/
# Remove dead links
s@Tungsten Graphics (http://www.tungstengraphics.com)@Tungsten Graphics@g
# C string src/gallium/state_trackers/vega/api_misc.c
s/"Tungsten Graphics, Inc"/"VMware, Inc"/
Reviewed-by: Brian Paul <brianp@vmware.com>
Fixes regression from 9baa45f78b
v2: incorporate a few small changes suggested by Roland.
Reviewed-by: José Fonseca <jfonseca@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
It's possible to bind a smaller buffer as a constant buffer, than
what the shader actually uses/requires. This could cause nasty
crashes. This patch adds the architecture to pass the maximum
allowable constant buffer index to the jit to let it make
sure that the constant buffer indices are always within bounds.
The behavior follows the d3d10 spec, which says the overflow
should always return all zeros, and overflow is only defined
as access beyond the size of the currently bound buffer. Accesses
beyond the declared shader constant register size are not
considered an overflow and expected to return garbage but consistent
garbage (we follow the behavior which some wlk tests expect which
is to return the actual values from the bound buffer).
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Implement Alpha to Coverage by discarding a fragment alpha component is
less than 0.5. This is a joint work of Jose and Si.
Reviewed-by: José Fonseca <jfonseca@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
With this patch llvmpipe will adhere to the ARB_depth_clamp enabled state when
clamping the fragment's zw value. To support this, the variant key now includes
the depth_clamp state. key->depth_clamp is derived from pipe_rasterizer_state's
(depth_clip == 0), thus depth clamp is only enabled when depth clip is disabled.
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Reviewed-by: José Fonseca <jfonseca@vmware.com>
The fact that we flush denorms to zero breaks our half-float
conversion and blending. This patches enables denorms for
blending. It's a little tricky due to the llvm bug that makes
it incorrectly reorder the mxcsr intrinsics:
http://llvm.org/bugs/show_bug.cgi?id=6393
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: José Fonseca <jfonseca@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Signed-off-by: Zack Rusin <zackr@vmware.com>
With this patch, generate_fs_loop will clamp any fragment shader depth writes
to the viewport's min and max depth values. Viewport selection is determined
by the geometry shader output for the viewport array index. If no index is
specified, then the default viewport index is zero. Semantics for this path
can be found in draw_clamp_viewport_idx and lp_clamp_viewport_idx.
lp_jit_viewport was created to store viewport information visible to JIT code,
and is validated when the LP_NEW_VIEWPORT dirty flag is set.
lp_rast_shader_inputs is responsible for passing the viewport_index through
the rasterizer stage to fragment stage (via lp_jit_thread_data).
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Reviewed-by: José Fonseca <jfonseca@vmware.com>
d3d10 requires us to convert NaNs to zero for any float->int conversion.
We don't really do that but mostly seems to work. In particular I suspect the
very common float->unorm8 path only really passes because it relies on sse2
pack intrinsics which just happen to work by luck for NaNs (float->int
conversion in hw gives integer indeterminate value, which just happens to be
-0x80000000 hence gets converted to zero in the end after pack intrinsics).
However, float->srgb didn't get so lucky, because we need to clamp before
blending and clamping resulted in NaN behavior being undefined (and actually
got converted to 1.0 by clamping with sse2). Fix this by using a zero/one clamp
with defined nan behavior as we can handle the NaN for free this way.
I suspect there's more bugs lurking in this area (e.g. converting floats to
snorm) as we don't really use defined NaN behavior everywhere but this seems
to be good enough.
While here respecify nan behavior modes a bit, in particular the return_second
mode didn't really do what we wanted. From the caller's perspective, we really
wanted to say we need the non-nan result, but we already know the second arg
isn't a NaN. So we use this now instead, which means that cpu architectures
which actually implement min/max by always returning non-nan (that is adhering
to ieee754-2008 rules) don't need to bend over backwards for nothing.
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
shader has already been dereferenced earlier so cannot be null here.
Fixes "Dereference before null check" defect reported by Coverity.
Signed-off-by: Vinson Lee <vlee@freedesktop.org>
Reviewed-by: Brian Paul <brianp@vmware.com>
We must take rounding in consideration when re-scaling to narrow
normalized channels, such as 2-bit normalized alpha.
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
If the fragment shader is null then pixel shader invocations have
to be equal to zero. And if we're running a null ps then clipper
invocations and primitives should be equal to zero but only
if both stancil and depth testing are disabled.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Usually with fixed point renderbuffers clamping is done as part of conversion.
However, since we blend in float format, we essentially skip all conversion
steps pre-blend but since this is still a fixed point renderbuffer we must
still clamp the inputs in this case. Makes no difference for piglit though.
Obviously we could skip this if fragment color clamping is enabled, but a)
this is deprecated in OpenGL (d3d never had it) and b) we don't support it
natively so it gets baked into the shader.
Also add some comment about logic ops being broken for srgb, luckily no test
tries to do that as there's no easy fix...
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Reviewed-by: Zack Rusin <zackr@vmware.com>
We were fixing up the blend factor to ZERO, however this only works correctly
with fixed point render buffers where the input values are clamped to 0/1
(because src_alpha_saturate is min(As, 1-Ad) so can be negative with unclamped
inputs). Haven't seen any failure anywhere due to that with fixed point SNORM
buffers (which clamp inputs to -1/1) but it should apply there as well (snorm
blending is rare, even opengl 4.3 doesn't require snorm rendertargets at all,
d3d10 requires them but they are not blendable).
Doesn't look like piglit hits this though (some internal testing hits the
float case at least). (With legacy OpenGL we could theoretically still use the
fixup to zero if the fragment color clamp is enabled, but we can't detect that
easily since we don't support native clamping hence it gets baked into the
shader.)
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Reviewed-by: Zack Rusin <zackr@vmware.com>
Just use the new conversion functions to do the work. The way it's plugged
in into the blend code is quite hacktastic but follows all the same hacks
as used by packed float format already.
Only support 4x8bit srgb formats (rgba/rgbx plus swizzle), 24bit formats never
worked anyway in the blend code and are thus disabled, and I don't think anyone
is interested in L8/L8A8. Would need even more hacks otherwise.
Unless I'm missing something, this is the last feature except MSAA needed for
OpenGL 3.0, and for OpenGL 3.1 as well I believe.
v2: prettify a bit, use separate function for packing.
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
OpenGL doesn't support this but d3d10 does.
It is a bit of a pain as it is necessary to keep track of queries
still active at the end of a scene, which is also why I cheat a bit
and limit the amount of simultaneously active queries to (arbitrary)
16 (simplifies things because don't have to deal with a real list
that way). I can't think of a reason why you'd really want large
numbers of overlapping/nested queries so it is hopefully fine.
(This only affects queries which need to be binned.)
v2: don't copy remainder of array when deleting an entry simply replace
the deleted entry with the last one (order doesn't matter).
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Squashed commit of the following:
commit 0857a7e105bfcbc4d1431b2cc56612094c747ca3
Author: Richard Sandiford <r.sandiford@uk.ibm.com>
Date: Tue Jun 18 12:25:07 2013 -0400
gallivm: Fix lp_build_rgba8_to_fi32_soa for big endian
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Richard Sandiford <r.sandiford@uk.ibm.com>
commit 0d65131649a8aa140e2db228ba779d685c4333e3
Author: Richard Sandiford <r.sandiford@uk.ibm.com>
Date: Tue Jun 18 12:25:07 2013 -0400
gallivm: Fix big-endian machines
This adds a bit-shift count to the format table, and adds the concept of
vector or bitwise alignment on gathers.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Richard Sandiford <r.sandiford@uk.ibm.com>
commit 9740bda9b7dc894b629ed38be9b51059ce90818f
Author: Richard Sandiford <r.sandiford@uk.ibm.com>
Date: Tue Jun 18 12:25:07 2013 -0400
llvmpipe: Fix convert_to_blend_type on big-endian
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Richard Sandiford <r.sandiford@uk.ibm.com>
commit ae037c2de0f029e4e99371c0de25560484f0d8df
Author: Richard Sandiford <r.sandiford@uk.ibm.com>
Date: Tue Jun 18 12:25:06 2013 -0400
util: Convert color pack to packed formats
This fixes them on big-endian.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Richard Sandiford <r.sandiford@uk.ibm.com>
commit 5b05ac0c89ae092ea8ba5bba9f739708d7396b5c
Author: Richard Sandiford <r.sandiford@uk.ibm.com>
Date: Tue Jun 18 12:25:06 2013 -0400
graw-xlib: Convert to packed formats
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Richard Sandiford <r.sandiford@uk.ibm.com>
commit 51396e7d098cb6ff794391cf11afe4dbf86dbea0
Author: Richard Sandiford <r.sandiford@uk.ibm.com>
Date: Tue Jun 18 12:25:06 2013 -0400
format: Convert to packed formats
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Richard Sandiford <r.sandiford@uk.ibm.com>
commit 417b60bc66eb450e68a92ab0e47f76e292b385e6
Author: Adam Jackson <ajax@redhat.com>
Date: Tue Jun 18 12:25:06 2013 -0400
st/dri: Convert to packed formats
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Richard Sandiford <r.sandiford@uk.ibm.com>
commit 0934b2e022a5e0847d312c40734e2b44cac52fd8
Author: Richard Sandiford <r.sandiford@uk.ibm.com>
Date: Tue Jun 18 12:25:06 2013 -0400
st/xlib: Convert to packed formats
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Richard Sandiford <r.sandiford@uk.ibm.com>
commit a307ea3c3716a706963acce7966b5e405ba11db9
Author: Richard Sandiford <r.sandiford@uk.ibm.com>
Date: Tue Jun 18 12:25:06 2013 -0400
gbm: Convert to packed formats
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Richard Sandiford <r.sandiford@uk.ibm.com>
commit 53eebdd253e1960a645ea278f31d7ef6a6cf4aeb
Author: Richard Sandiford <r.sandiford@uk.ibm.com>
Date: Tue Jun 18 12:25:06 2013 -0400
tests: Convert to packed formats
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Richard Sandiford <r.sandiford@uk.ibm.com>
commit 2f77fe3ee524945eacd546efcac34f7799fb3124
Author: Adam Jackson <ajax@redhat.com>
Date: Tue Jun 18 13:07:37 2013 -0400
gallium: Document packed formats
Signed-off-by: Adam Jackson <ajax@redhat.com>
commit 1f1017159ce951f922210a430de9229f91f62714
Author: Richard Sandiford <r.sandiford@uk.ibm.com>
Date: Tue Jun 18 12:25:06 2013 -0400
gallium: Introduce 32-bit packed format names
These are for interacting with buffers natively described in terms of
bit shifts, like X11 visuals:
uint32_t xyzw8888 = (x << 0) | (y << 8) | (z << 16) | (w << 24);
Define these in terms of (endian-dependent) aliases to the array-style
format names.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Richard Sandiford <r.sandiford@uk.ibm.com>
commit 6cc7ab1ee66ed668da78c1d951dfd7782b4e786a
Author: Adam Jackson <ajax@redhat.com>
Date: Mon Jun 3 12:10:32 2013 -0400
gallium: Document format name conventions
v2:
- Fix a channel name thinko (Michel Dänzer)
- Elaborate on SCALED versus INT
- Add links to DirectX and FOURCC docs
Signed-off-by: Adam Jackson <ajax@redhat.com>
commit df4d269e7fb62051a3c029b84147465001e5776e
Author: Adam Jackson <ajax@redhat.com>
Date: Tue Jun 18 12:25:06 2013 -0400
gallivm: Remove all notion of byte-swapping
Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
This was always doing per-pixel alignment which isn't necessary, except
for the buffer case (due to the per-element offset). The disabled code
for calculating it was incorrect because it assumed that always the full
block would be fetched, which may not be the case, so fix this up.
The original code failed for instance for r10g10b10a2 the alignment would
have been calculated as 4 (block_width) * 4 (bytes) so 16, but the actual
fetch may have only fetched 2 values at a time, hence only alignment 8 -
it is unclear what exactly would happen in this case (alignment larger
than size to fetch).
So just use the (already calculated) fetch size instead and get alignment
from that which should always work, no matter if fetching 1,2 or 4 pixels.
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
For rendering to buffers, we cannot have any y alignment.
So make sure that tile clear commands only clear up to the fb width/height,
not more (do this for all resources actually as clearing more seems
pointless for other resources too). For the jit fs function, skip execution
of the lower half of the fragment shader for the 4x4 stamp completely,
for depth/stencil only load/store the values from the first row
(replace other row with undef).
For the blend function, also only load half the values from fs output,
replace the rest with undefs so that everything still operates on the
full 4x4 block to keep code the same between 4x1 and 4x4 (except for
load/store of course which also needs to skip (store) or replace these
values with undefs (load))., at the cost of slightly less optimal code
being produced in some cases.
Also reduce 1d and 1d array alignment too, because they can be handled the
same as buffers so don't need to waste memory.
v2: don't try to run special blend code for 4x1, (very) slightly less
complexity if we just use the same code as for 4x4 which may or may not
make it easier to optimize in the future (as we care a lot more about 4x4
performance than 1d).
v2: don't use undef values for unused fs src outputs with llvm 3.1 as it
apparently can trigger a bug in llvm.
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Some parameters were used inconsistently, for instance not using
block_width/block_height/block_size for deferring number of pixels
but rather relying on guesses from the number of fragment shaders etc,
so fix this up (no actual change in behavior since the block size stays
fixed). (Though most of the code would work with different block_height,
with three exceptions, one being the hacked r11g11b10 conversions and
twiddle code which only work with block_height 2 not 1, and the last
one being blend vector type not being 128bit wide.)
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
This optimization disabled mask checks if the shader is simple enough.
While this should work correctly, the problem is that it can hide real issues
because shaders in practice are usually complex enough (8 instructions or 1
texture is already enough) so this doesn't get used, whereas dumbed-down
tests which should hit all the same code paths suddenly do something quite
different. This was the reason that bug 41787 could not be easily tracked as
stencil test not working correctly (piglit would in fact have failed some
tests without that optimization).
So disable it for now, it's unclear if it's much of a win in any case.
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
We actually did early depth/stencil test and late depth/stencil write even
when the shader could kill the fragment (alpha test or discard). Since it
matters for the new stencil value if the fragment is killed by depth/stencil
test or by the shader (in which case it will not reach the depth/stencil
test) this simply cannot work (we also would possibly skip writing the new
stencil value due to mask checks but this is a secondary issue).
So use late depth test / late depth write instead in this case.
(No piglit changes as it doesn't seem to hit such bogus early depth test
/ late depth write path.)
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
We did mask checks between depth/stencil testing and depth/stencil write.
This meant that if the depth/stencil test killed off all fragments we never
actually wrote the new stencil value. This issue affected all early/late
test/write combinations.
So move the mask check after depth/stencil write (for early depth test,
could do the same for late depth test but might not be worth it at that
point so just skip it there).
This addresses https://bugs.freedesktop.org/show_bug.cgi?id=41787.
Piglit does not hit this issue because of the simple_shader optimization
in generate_fs_loop() which means we're skipping the mask checks.
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
We need to split up the depth and stencil values in this case, and there's
some new logic required to handle float depth and stencil simultaneously.
Also make sure we get the 64bit zs clear values and masks propagated
correctly.
Eliminating this we no longer need to copy between linear and swizzled layout.
This is probably not quite ideal since it's a bit more work for now, could do
some optimizations by moving depth testing outside the fragment shader loop
(but tricky for early depth test as we don't have neither the mask nor the
interpolated z in the right order handy).
The large amount of tile/untile code is no longer needed will be deleted
in next commit.
No piglit regressions.
v2: change a forgotten LAYOUT_NONE to LAYOUT_LINEAR.
v3: fix (bogus) uninitialized variable warnings, add comments, fix a bad type
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Dave Airlie
Eric Anholt
Dylan Baker
Eric Engestrom
Marek Olšák
Roland Scheidegger
Brian Paul
Ian Romanick
Nicolai Hähnle
Aaron Watry
Rob Clark
Jose Fonseca
Edward O'Callaghan
Ilia Mirkin
Mathias Fröhlich
Zack Rusin
Si Chen
Matthew McClure
Vinson Lee
Adam Jackson