We always want to update the fast clear color during a fast clear on
i965. On anv, we are doing that before a resolve, but by adding support
to blorp, we can do a similar thing and update it during a fast clear
instead.
The goal is to remove some code from anv that does such update, and
centralize everything in blorp, hopefully removing a lot of code
duplication. It also allows us to have a similar behavior on gen < 9 and
gen >= 10.
v5: s/we/we are/ (Jordan)
Signed-off-by: Rafael Antognolli <rafael.antognolli@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
We only need to copy the clear color from the state buffer to the
inlined surface state when doing a resolve.
Signed-off-by: Rafael Antognolli <rafael.antognolli@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
On gen10+, if surface->clear_color_addr is present, use it directly
intead of copying it to the surface state.
v4: Remove redundant #if clause for GEN <= 10 (Jason)
v5: Move flush after the reloc, and keep lower bits (Topi).
Signed-off-by: Rafael Antognolli <rafael.antognolli@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
The size of the clear color struct (expected by the hardware) is 8
dwords (isl_dev.ss.clear_value_state_size here). But we still need to
track the size of the clear color, used when memcopying it to/from the
state buffer. For that we keep isl_dev.ss.clear_value_size.
v4:
- Add struct to gen11 too (Jason, Jordan)
- Add field for Converted Clear Color to gen11 (Jason)
- Add clear_color_state_offset to differentiate from
clear_value_offset.
- Fix all the places where clear_value_size was used.
v5 (Jason):
- Split genxml changes to another commit.
- Remove unnecessary gen checks.
- Bring back missing offset increment to init_fast_clear_color().
v6 (Jason):
- On init_fast_clear_color, change:
addr.offset += 4 => sdi.Address.offset += i * 4
- Use GEN_GEN instead of GEN_VERSIONx10.
[jordan.l.justen@intel.com: isl_device_init changes]
Signed-off-by: Rafael Antognolli <rafael.antognolli@intel.com>
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This is a legitimate warning: if anv's blorp_alloc_binding_table() throws
an error from anv_cmd_buffer_alloc_blorp_binding_table(), we silently
continue to use this undefined value. The rest of this code doesn't seem
very allocation-error-proof, though, either.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
[84/227] Compiling C object 'src/intel/vulkan/libanv_gen110@sta/genX_blorp_exec.c.o'.
../src/intel/vulkan/genX_blorp_exec.c:68:1: warning: ‘blorp_get_surface_base_address’ defined but not used [-Wunused-function]
blorp_get_surface_base_address(struct blorp_batch *batch)
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Rafael Antognolli <rafael.antognolli@intel.com>
We want people to be using ISL_FORMAT_*, rather than the genxml format
enumerations. This patch drops 10 separate copies, and drops a bunch
of ugly casting.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
[jordan.l.justen@intel.com: Minor changes for rebase]
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Split out the device info so isl doesn't depend on intel/common. Now
it will depend on the new intel/dev device info lib.
This will allow the decoder in intel/common to use isl, allowing us to
apply Ken's patch that removes the genxml duplication of surface
formats.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
This is a bit complicated because we have to get the indirect clear
color in there somehow. In order to not do any more work in the shader
than needed, we set it up as it's own vertex binding which points
directly at the clear color address specified by the client.
Acked-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
There are enough #ifs in there that it's kind-of pointless to duplicate
it for each buffer.
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
SIMD4x2 dispatch mode has been removed in GEN11. We're not using
it anyways in Mesa. Adding few asserts to make it explicit.
Use GEN_GEN macro in place of devinfo->gen (Ken)
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
StateCacheInvalidation is required on all gen7+ platforms. We
don't need to update this check for every new gen h/w unless
this requirement is changed. So, dropping the check for latest
gen h/w.
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This makes our MOCS settings significantly more flexible.
Cc: "17.3" <mesa-stable@lists.freedesktop.org>
Tested-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Fixes warnings like
warning: implicit conversion from enumeration type 'enum isl_format' to
different enumeration type 'enum GEN10_SURFACE_FORMAT'
[-Wenum-conversion]
.SourceElementFormat = ISL_FORMAT_R32_UINT,
^~~~~~~~~~~~~~~~~~~
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
The PRM SKL-Vol 2b-05.16 says:
"Within a VERTEX_ELEMENT_STATE structure, if a Component Control
field is set to something other than VFCOMP_STORE_SRC, no
higher-numbered Component Control fields may be set to
VFCOMP_STORE_SRC. In other words, only trailing components can be set
to something other than VFCOMP_STORE_SRC."
Since we set the component 1 to VFCOMP_STORE_0 on gen8+, and
VFCOMP_STORE_IID on gen5+, and we are not using components 2 and 3,
let's also set them to VFCOMP_STORE_0.
Signed-off-by: Rafael Antognolli <rafael.antognolli@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
Apparently, the sampler has some sort of precision issues for
non-normalized texture coordinates with linear filtering. This caused
some small precision issues in scaled blits. Work around this by using
normalized coordinates. There is some extra work necessary because Gen6
uses TEX (instead of TXF) for some multisample resolve blits.
Fixes piglit.spec.arb_framebuffer_object.fbo-blit-stretch on SNB.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=68365
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Eduardo Lima Mitev <elima@igalia.com>
The blorp_hiz_op entrypoint always acts on a full subresource of a HiZ
buffer so we can just set the flag unconditionally.
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
This commit, out of necessity, makes a number of changes at once:
1) Changes intel_mipmap_tree to store the clear color for both color
and depth as an isl_color_value.
2) Changes the depth/stencil emit code to do the format conversion of
the depth clear value on Haswell and earlier instead of pulling a
uint32_t directly from the miptree.
3) Changes ISL's depth/stencil emit code to perform the format
conversion of the depth clear value on Haswell and earlier instead
of assuming that the depth value in the float is pre-converted.
4) Changes blorp to pass the depth value through as a float.
5) Changes the Vulkan driver to pass the depth value to blorp as a
float rather than a uint.
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Chad Versace <chadversary@chromium.org>
Due to complications with things such as URB setup on gen4-5, it's
easier to keep gen4 support in blorp completely internal to i965. This
makes things a bit awkward because that means there's a file in i965
that includes blorp_priv.h but it's either that or have a file in blorp
that includes brw_context.h.
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
As part of enabling support for SF programs, we plumb the SF URB size
through to emit_urb_config. For now, it's always zero but, on gen4, it
may be something larger.
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
We also add a slot variable and use it as an iterator. This will make
it much easier to conditionally put something between the header and the
vertex position.
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Name the options to "Pixel Location":
- PIXLOC_CENTER -> CENTER
- PIXLOC_UL_CORNER -> UL_CORNER
Signed-off-by: Rafael Antognolli <rafael.antognolli@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
We need to emit BLEND_STATE, which size is 1 + 2 * nr_draw_buffers
dwords (on gen8+), but the BLEND_STATE struct length is always 17. By
marking it size 1, which is actually the size of the struct minus the
BLEND_STATE_ENTRY's, we can emit a BLEND_STATE of variable number of
entries.
For gen6 and gen7 we set length to 0, since it only contains
BLEND_STATE_ENTRY's, and no other data.
With this change, we also change the code for blorp and anv to emit only
the needed BLEND_STATE_ENTRY's, instead of always emitting 16 dwords on
gen6-7 and 17 dwords on gen8+.
v2:
- Use designated initializers on blorp and remove 0 from
initialization (Jason)
- Default entries to disabled on Vulkan (Jason)
- Rebase code.
Signed-off-by: Rafael Antognolli <rafael.antognolli@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This makes it much easier to throw together a bit of dynamic state. It
also automatically handles flushing so you don't accidentally forget.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
We're about to replace blorp's emit code with ISL and it emits them in
the other order. This makes diffing the aubs easier.
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
This was used for aubdumping (deleted a while ago) and INTEL_DEBUG=bat
decoding (deleted recently).
While we're changing parameters, delete the wrapper macro and make the
actual function brw_state_batch instead of __brw_state_batch.
This subsumes a patch by Emil Velikov to drop this from BLORP.
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Most of the time we use macros that handle this situation transparently,
but there are some cases were we need to handle this explicitly.
This patch makes sure we don't crash, notice that error handling takes
place in the function that actually failed the allocation,
anv_batch_emit_dwords(), which will set the status field of the batch
so it can be used at a later moment to report the error to the user.
v2:
- Not crashing is not good enough, we need to keep track of the error
(Topi, Jason). Iago: now that we track errors in the batch, this
is being handled.
- Added guards in a few more places that needed it (Iago)
v3:
- Check result of anv_batch_emitn() for NULL before calling memset()
in emit_vertex_input() (Topi)
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Found by inspection. However, I expect it fixes real bugs when using
blorp from Vulkan on little-core platforms.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: "13.0 17.0" <mesa-stable@lists.freedesktop.org>
We'll be switching to layout-transition based resolves which can occur
outside of a render pass. Add this sequence to BLORP, as using BLORP
will enable emitting depth stencil state outside of a render pass (among
other benefits). The depth buffer extent is ignored to enable eventual
usage in VkCmdClearAttachments().
Signed-off-by: Nanley Chery <nanley.g.chery@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
When a pre-baked binding table is requested, no binding table is created,
instead the binding table offset (relative to surface state base address)
provided by the user is used verbatim.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>