Making use of the relatively recent FDO_BASE_IMAGE feature of the
templates, the x86_test-base image contents are shared as a separate
layer by the x86_test-gl/vk images (meaning the former only needs to be
downloaded once for either or both of the latter). This should be more
efficient in terms of overall network bandwidth and storage, in
particular if the base image changes less often than the -gl/vk ones.
v2:
* List x86_test-base in needs: along with x86_test-gl/vk (see parent
commit)
* Always put $STABLE/TESTING_EPHEMERAL on separate lines, will make it
easier to add any non-ephemeral packages
Reviewed-by: Eric Anholt <eric@anholt.net> # v1
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5186>
Given that a530 doesn't have cpufreq, we really don't have the time to be
running the validator on all of deqp. This also helps explain why I had
to go to such a small fraction on the a3xx gles3 run (which we can now
increase). However, a3xx gles2 seems to be fast enough that we can leave
it enabled and get coverage for older chips.
Because we run more tests now, clear out some stale xfails from the a3xx
list.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5089>
We were doing sed -i /filter/p, which printed everything but printed the
filtered things twice (though they'd only get tested once). Now that the
filter works, run all the UBO tests instead of doing a 1/5 run, revealing
a new failure.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5089>
Now that we don't get scheduled to any 19mhz CPUs, the old GLES3 job went
from 12 minutes of deqp-runner runtime to 54s. Increase how much of the
testsuite we cover in exchange, still keeping the runtime at 3-6 min
(compared to previous 10-17 min). Since the tests we're running changed,
reset the xfails list.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5115>
The runner is an x86 system, so running the ARM image meant doing
everything at runtime under qemu, and for the xz of the test rootfs that
was quite expensive. Also, we can rebuild x86 images much faster than we
can rebuild arm images for container development, which will help unblock
some of the other feature parity work I have to do versus the old docker
system that cheza is using.
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5033>
testing's versions have updated, and the apt one was pretty big in the
stripped rootfs.
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5033>
If the file doesn't exist, fine. We didn't happen to get that package
dragged in.
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5033>
This adds a few more variables that we found we needed for x86-to-arm dEQP
cross builds. Also note that we're now fixed to use ccache in the dEQP
builds.
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5033>
The x86 baremetal build would have an armhf cross file, and need the
kernel env setup.
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5033>
We're going to do this in another container soon, and it would also be
nice to consolidate cmake cross setup.
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5033>
v2: Verbatim translation from the original shell script
Make the corrections visible in explicit commits (Andres)
Remove redundant code (Alexandros)
Code style nitpick (Rohan)
Reimplementation of the tracie's self-tests using a pythonic test suit
(pytest).
The new tracie/test.py module is almost a direct translation of the
tests defined in the tracie/test.sh. This new implementation of the
test provides a more common framework where define the tests.
Also allows a better introspection for the tests results and/or
resulting errors.
This patch also adds python3-pytest as dependency for the built images
and adapts the tracie-runner scripts to run the self-test using pytest.
Signed-off-by: Pablo Saavedra <psaavedra@igalia.com>
Reviewed-by: Alexandros Frantzis <alexandros.frantzis@collabora.com> [v1]
Reviewed-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Rohan Garg <rohan.garg@collabora.com> [v1]
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4916>
All the other files in bin/ are not used by any build system and as such
cannot affect the build.
I've been working on maintainer tools lately and it's frustrating to have
the CI wait for 45 minutes to rebuild everything and not even read/run
the files in the MR when it could've just been merged and moved on to
the next MR 45 minutes ago.
Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Acked-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5046>
Instead of a third-party repository which has proved unreliable at
times.
This pulls in glibc 2.30 from testing in the x86_build image, so we need
to update the x86_test-{gl,vk} images to match.
Acked-by: Andres Gomez <agomez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4851>
We don't want LLVM 8 packages to be pulled in from testing though (it
would make installing llvm-8-dev for cross architectures a lot more
complicated), so explicitly select buster-backports for them (they were
already implicitly installed from there before, since they're not
available in buster proper).
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4851>
Notable changes:
* No longer generate a separate *-built-by-job-* image tag, instead
store the pipeline/job information as labels in the image.
* Clean up some package information files which were accidentally left
before, possibly resulting in slightly smaller images.
Acked-by: Andres Gomez <agomez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4851>
We will eventually need to build our own LLVM on Windows in order to
build libclc and other bits which are required for the d3d12 build, as
well as to be able to test SPIR-V/OpenCL on llvmpipe.
Start doing this now, building into the base container, and exercise
this by building llvmpipe under Windows.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4946>
This job is really small and it shouldn't hurt to cover two more
generations. This will prevent breaking the world on GFX6-GFX7
because we don't regularly test these chips.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4873>
This lets us get coverage of corner cases of the driver that are tricky to
force a testcase to hit. We don't want to do a full run of the CTS with
each option because that's a lot of runner time, so stack a bunch of
fractional runs in one test job to amortize the test run setup overhead.
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4621>
It's easy to get something wrong in the driver build or container or
something that results in falling back to swrast, and then your only clue
was runtime and how your failure cases suspiciously match a swrast
driver's.
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4621>
We always want to see status updates happening in the logs, otherwise it
can like maybe your machine hung until the run actually completes.
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4621>
We haven't had it enabled due tointermittent failures. Those failures
are, as far as I can tell, due to GPU faults from buffer overflows where a
failing test in a thread stomps an otherwise passing thread's buffers. By
running deqp single-threaded, we can get more consistent failures, at the
cost of needing to do a tiny subset of the tests to keep runtime down.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4685>
Additionally, purge the winehq-stable package and its dependencies to
avoid crashing when building for s390x.
v2:
- Remove winehq-stable and dependencies for s390x.
Closes: https://gitlab.freedesktop.org/mesa/mesa/issues/2657
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Daniel Stone <daniels@collabora.com> [v1]
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4678>
Add virglrenderer to the container and use the vtest transport to test
the Gallium driver. On the "host", llvmpipe is used.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4433>
An update seems to have poisoned gitlab-runner, and it can no longer
resolve DNS even though the host system can.
Disable this until we can figure out what's going on.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4589>
Verify that the Mesa version used when running tracie tests is the
one that was built by CI, rather than any installed distro version.
Signed-off-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Reviewed-by: Rohan Garg <rohan.garg@collabora.com>
Reviewed-by: Andres Gomez <agomez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3894>
Without this, the .test-manual jobs could end up as 'when: manual' when
the jobs they depend on were 'when: never', which was flagged as
invalid YAML, preventing the pipeline from being created.
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4522>
MR pipelines not triggered by Marge Bot can still be triggered manually.
Motivation: The main & forked Mesa project CI pipelines combined are
currently generating over 1 TB of egress traffic per week. ~80% of this
is from pre-merge pipelines. Assuming this corresponds to 4 pre-merge
and one post-merge pipeline per MR on average, this change could
potentially eliminate up to ~60% of the overall traffic (by preventing
3 of the 4 pre-merge pipelines from running automatically).
(Of course, this could be subverted if all jobs of the other pipelines
were triggered manually anyway... In most cases, manually triggering
just a few jobs should suffice)
v2:
* $GITLAB_USER_NAME was the wrong variable, $GITLAB_USER_LOGIN should
do the trick.
Suggested-by: Marek Olšák <maraeo@gmail.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4432>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4432>
Let them run automatically once all their dependencies have passed.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4432>
To avoid confusion with `paths:` elements.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4432>
Our shared runners are set up for concurrent jobs ~= CPUs / 4 (x86) or 8
(ARM). If you use more build processes than that, then jobs may be
fighting each other for shared system resources, possibly to the point of
failure (we've seen one of the runners OOM on some jobs before, though I'm
not sure if this was the cause).
To try to systematically prevent the problem, we make a ninja wrapper in
the containers that passes the -j flags, and set MAKEFLAGS in the
container builds. This doesn't cover make in non-container builds, but I
believe we don't have any of those.
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3782>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3782>
This prunes out all targets except libgl-gdi, libgl-xlib, and svga, as
suggested by Marek Olšák.
libgl-xlib will be remove once I have had time to confirm no automated
tests we have rely upon it.
There are also a bunch of Makefile.sources which become orphaned as
result, that are not taken care of in this change.
v2: Prune remainders of swr support.
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4348>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4348>
Eric Anholt
Michel Dänzer
Pablo Saavedra
Eric Engestrom
Daniel Stone
Samuel Pitoiset
Andres Gomez
Tomeu Vizoso
Alexandros Frantzis
Jose Fonseca