This commit fills out VkPhysicalDeviceSubgroupProperties if present
in a VkPhysicalDeviceProperties2. The values here are simply pulled
from the blob.
Fixes some flakes in dEQP-VK.subgroups.* since dEQP was reading
uninitialized values of VkPhysicalDeviceSubgroupProperties.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5564>
Instead of having these functions sprinkled around the driver (and ending
with a duplicated tu6_compare_func for example), move everything to a
common header (using the previously unused tu_util.h).
Also applied some simplifications: using a cast when the HW enum matches
the VK enum, and using a lookup table when it makes sense (which is IMO
nicer than the switch case way).
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5538>
This fixes the newly added cubic blit_image tests for A650, by falling back
to the 3D path and setting the filter correctly.
Note: there are still failures with the texture filtering tests.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5509>
Otherwise A6XX_TEX_SAMP_1_{MIN,MAX}_LOD silently overflows.
This fixes these tests:
dEQP-VK.texture.explicit_lod.2d.derivatives.*
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5375>
Comparing a blob trace using the feature to one not, the difference was
pretty obvious and in the spot you'd expect compared to alphaToCoverage.
The SP_ reg didn't have a corresponding bit set, though it also has an
alphaToCoverage.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5343>
This makes it a little more explicit that the values line up.
src/freedreno/vulkan/tu_device.c:2209:75: warning: implicit conversion
from enumeration type 'const VkSamplerReductionMode' (aka 'const enum
VkSamplerReductionMode') to different enumeration type 'enum
a6xx_reduction_mode' [-Wenum-conversion]
Reviewed-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5174>
Most changes based on radv, some simplification, since we don't need to
sample multiple planes, 422_UNORM/420_UNORM formats will be supported
directly using the hardware formats for those.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4590>
Device UUID becomes SHA1('freedreno' + gpu_id).
Driver UUID becomes SHA1(mesa-version + git-head-sha1).
v2: Don't use build_id for driver UUID since it generates different
values for vulkan and gl shared objects. (Kristian)
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4847>
The new files are created under a 'common' folder under 'src/freedreno',
where shared functionality between GL and Vulkan drivers (that is not
registers, layout or compiler) will be placed.
Reviewed-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4847>
This is simpler than a full-blown memory reuse mechanism, but is good
enough to make sure that repeatedly doing a copy that requires the
linear staging buffer workaround won't use excessive memory or be slowed
down due to repeated allocations.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5007>
New blit code doesn't change this value, and different values seem to be
related to the driver version and not the GPU version.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4608>
Passes tests in:
dEQP-VK.pipeline.multisample.sample_locations_ext.*
Note that these tests fail because of gl_PrimitiveID not working correctly:
dEQP-VK.pipeline.multisample.sample_locations_ext.verify_location.*
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4665>
This appears to be limited by VPC_CNTL_0::NUMNONPOSVAR, which is an
8-bit bitfield with no possibility for expansion. Also, in practice
we'll be limited by the vertex shader output maximum, which includes
gl_Position, of 128, so that users won't be able to use more than 124
components anyways. Lower it to match the GL blob.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4641>
Under the bindless model, there are 5 "base" registers programmed with a
64-bit address, and sam/ldib/ldc and so on each specify a base register
and an offset, in units of 16 dwords. The base registers correspond to
descriptor sets in Vulkan. We allocate a buffer at descriptor set
creation time, hopefully outside the main rendering loop, and then
switching descriptor sets is just a matter of programming the base
registers differently. Note, however, that some kinds of descriptors
need to be patched at command recording time, in particular dynamic
UBO's and SSBO's, which need to be patched at CmdBindDescriptorSets
time, and input attachments which need to be patched at draw time based
on the the pipeline that's bound. We reserve the fifth base register
(which seems to be unused by the blob driver) for these, creating a
descriptor set on-the-fly and combining all the dynamic descriptors from
all the different descriptor sets. This way, we never have to copy the
rest of the descriptor set at draw time like the blob seems to do. I
mostly chose to do this because the infrastructure was already there in
the form of dynamic_descriptors, and other drivers (at least radv) don't
cheat either when implementing this.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4358>
* Correct bypass value for a618
* Bypass value for blitter
* Don't set RB_CCU_CNTL again unnecessarily in tu6_emit_binning_pass
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3783>
Geometry shaders support an invocations parameter up to a limit
defined by maxGeometryShaderInvocations. This was set to 127, but
executing with invocations > 32 causes a crash. As it turns out, the
blob only advertises a max of 32 invocations, so we set that in
turnip as well.
Fixes dEQP-VK.geometry.instanced.draw_*_instances_{127, 64}_geometry_invocations
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4436>
Previously, turnip advertised 4-bit subpixel precision when in
practice, a6xx seems to render with 8-bit precision. This caused
dEQP-VK.renderpass2.suballocation.subpass_dependencies.late_fragment_tests.*
to fail because they compare images rendered with turnip against
ones rendered via a software reference implementation parameterized
by turnip's VkPhysicalDeviceLimits.subPixelPrecisionBits value.
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4172>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4172>
Emit a single table of all possible Vulkan border colors up front, and
then index into it using the Vulkan enum directly. In fact this seems to
be the entire point of separating out border colors in the first place.
In addition to being simpler and having less CPU overhead, and fixing
cases where more than one sampler uses border color, this paves the way
for bindless samplers because the existing approach isn't great for
bindless.
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4200>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4200>
Newer a6xx no longer has programmable GMEM base, so we can't rely on the
kernel driver setting it to 0x100000 (GMEM base is 0 on such GPUs).
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3979>
There's still a TODO related to key->sample_shading, but it doesn't look
like it changes anything in ir3, so it works without that.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3923>
This has only lightly been tested. It passes dEQP-VK.api.smoke.triangle,
so at least we're able to show a triangle. For now, it's just enabled
under a debug flag. In the future we'll probably want some heuristics
like what freedreno has and another debug flag to disable it except when
it's forced.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3713>
I merely ported a freedreno patch to turnip which
updates some magic regsiter values.
commit ff6e148a3d
Author: Rob Clark <robdclark@chromium.org>
CommitDate: Tue Oct 29 09:19:34 2019 -0700
Subject: freedreno/a6xx: add a618 support
That's all that Rob did for gallium for a618, so I assume that's we need
for turnip also.
Tested manually with:
dEQP-VK.api.image_clearing.core.clear_color_image.2d.linear.single_layer.*
pass 300/555
fail 0/555
skip 255/555
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3743>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3743>
The value of some magic regsiters differ across chipsets. fd6_context
manages the differences by initializing them at runtime. Let's do the
same.
Add to tu_physical_device a subset of those found in fd6_context:
RB_UNKNOWN_8E04_blit
RB_CCU_CNTL_gmem
PC_UNKNOWN_9805
SP_UNKNOWN_A0F8
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3743>
Jonathan Marek
Brian Ho
Eric Anholt
Kristian H. Kristensen
Eduardo Lima Mitev
Connor Abbott
Samuel Pitoiset
Rob Clark
Hyunjun Ko
Chad Versace