MEDIA_INTERFACE_DESCRIPTOR's Interface Descriptor Data Start Address
field's docs say: "This bit specifies the 64-byte aligned address..."
And we were doing 32. Superfluous thread ID uploading was apparently
saving us from GPU hangs in most cases.
v2: standard 'bool' can be used
( Eric Engestrom <eric.engestrom@intel.com> )
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Signed-off-by: Andrii Simiklit <andrii.simiklit@globallogic.com>
When the fault_pointer field in the header is set, we can get some idea
of which descriptor the HW isn't happy with if we know their addresses.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Then we can get some information back about any exception that might
have happened.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Arm's kernel driver mentions how to decode this field, which makes a bit
clearer what had happened.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
The only exception is the GS copy shader which emits them
unconditionally.
Totals from affected shaders:
SGPRS: 71320 -> 71008 (-0.44 %)
VGPRS: 54372 -> 54240 (-0.24 %)
Code Size: 2952628 -> 2941368 (-0.38 %) bytes
Max Waves: 9689 -> 9723 (0.35 %)
This helps Dota2, Doom, GTAV and Hitman 2.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This doesn't fix anything known, but it's likely going to
break if layerCount is ~0U.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This patch changes the code which sets EmitNoIndirectSampler to check
the core profile GLSL version, rather than the ARB_gpu_shader5 extension
enable. st/mesa exposes ARB_gpu_shader5 if GLSLVersion (in core
profiles) or GLSLVersionCompat (in compat profiles) >= 400.
The Intel drivers do not currently expose ARB_gpu_shader5 in compat
profiles. But the backend can absolutely handle indirect samplers.
Looking at the core profile version number should be a good indication
of what the driver supports.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
The helpers are needed so we can use the syntax `instr(cond)` in the
algebraic rules. Add simple rule for dropping a pair of mul-div of
the same value when wrapping is guaranteed to not happen.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
When handling the specified ALU operations, check for the decorations
and set nir_alu_instr no_signed_wrap and no_unsigned_wrap flags accordingly.
v2: Add a glsl_base_type_is_unsigned_integer() helper. (Karol)
v3: Rename helper to glsl_base_type_is_uint().
v4: Use two flags, so we don't need the helper anymore. (Connor)
v5: Pass alu directly to handle function. (Jason)
Reviewed-by: Karol Herbst <kherbst@redhat.com> [v3]
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
They indicate the operation does not cause overflow or underflow.
This is motivated by SPIR-V decorations NoSignedWrap and
NoUnsignedWrap.
Change the storage of `exact` to be a single bit, so they pack
together.
v2: Handle no_wrap in nir_instr_set. (Karol)
v3: Use two separate flags, since the NIR SSA values and certain
instructions are typeless, so just no_wrap would be insufficient
to know which one was referred to. (Connor)
v4: Don't use nir_instr_set to propagate the flags, unlike `exact`,
consider the instructions different if the flags have different
values. Fix hashing/comparing. (Jason)
Reviewed-by: Karol Herbst <kherbst@redhat.com> [v1]
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
There doesn't seem to be any reason to keep these opcodes around:
* fnot/fxor are not used at all.
* fand/for are only used in lower_alu_to_scalar, but easily replaced
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
We can vectorize instructions with different constant sources by creating
a new load_const and using that.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
In Midgard, a bundle consists of a few ALU instructions. Within the
bundle, there is room for an optional 128-bit constant; this constant is
shared across all instructions in the bundle.
Unfortunately, many instructions want a 128-bit constant all to
themselves (how selfish!). If we run out of space for constants in a
bundle, the bundle has to be broken up, incurring a performance and
space penalty.
As an optimization, the scheduler now analyzes the constants coming in
per-instruction and attempts to merge shared components, adjusting the
swizzle accessing the bundle's constants appropriately. Concretely,
given the GLSL:
(a * vec4(1.5, 0.5, 0.5, 1.0)) + vec4(1.0, 2.3, 2.3, 0.5)
instead of compiling to the naive two bundles:
vmul.fmul [temp], [a], r26
fconstants 1.5, 0.5, 0.5, 1.0
vadd.fadd [out], [temp], r26
fconstants 1.0, 2.3, 2.3, 0.5
The scheduler can now fuse into a single (pipelined!) bundle:
vmul.fmul [temp], [a], r26.xyyz
vadd.fadd [out], [temp], r26.zwwy
fconstants 1.5, 0.5, 1.0, 2.3
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
In the past, each query object had their own BO. Checking if the batch
referenced that BO was an easy way to check if commands were still
queued to compute the query value. If so, we needed to flush.
More recently (c24a574e6c), we started using an u_upload_mgr for query
objects, placing multiple queries in the same BO. One side-effect is
that iris_batch_references is a no longer a reasonable way to check if
commands are still queued for our query. Ours might be done, but a
later query that happens to be in the same BO might be queued. We don't
want to flush in that case.
Instead, check if the current batch's signalling syncpt is the one we
referenced when ending the query. We know the syncpt can't have been
reused because our query is holding a reference, so a simple pointer
comparison should suffice.
Removes all batch flushing caused by query objects in Shadow of Mordor.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
This returns a pointer to the signalling syncpt, without incrementing
the reference count. This can be useful for comparisons.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
The ss local var is guaranteed to be != NULL. Get rid of this useless
check.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
"Collabora, Ltd." should be listed in lieu of simply "Collabora"
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Suggested-by: Daniel Stone <daniels@collabora.com>
This support requires the driver to be a NIR driver as we use the
NIR lowering pass to do the clamping.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
A ton of tests were fixed by this series. A few were incorrectly passing
before (QualityError, for instance) and now are explicitly failing. A
few legitimate regressions but overwhelmingly positive.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Fixes cube map tests due to disagreements between Mesa, dEQP, and the
spec...
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
u_blitter gets "special treatment" and uses this mechanism to cast
cube maps to 2D textures in order to texelFetch them.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
In a vertex shader, a tex op should map to txl, as there *must* be a LOD
given to the hardware (implicitly or explicitly).
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Kenneth Graunke
Andrii Simiklit
Tomeu Vizoso
Samuel Pitoiset
Caio Marcelo de Oliveira Filho
Dylan Baker
Jonathan Marek
Alyssa Rosenzweig
Boris Brezillon
Rob Clark
Timothy Arceri
Sagar Ghuge