v2: Choose a proper rejection example (Emil).
Cc: Emil Velikov <emil.velikov@collabora.com>
Cc: Eric Engestrom <eric.engestrom@imgtec.com>
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Cc: Emil Velikov <emil.velikov@collabora.com>
Cc: Eric Engestrom <eric.engestrom@imgtec.com>
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Cc: Emil Velikov <emil.velikov@collabora.com>
Cc: Eric Engestrom <eric.engestrom@imgtec.com>
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
13b303ff92 added the actual enums but
didn't remove the already existing XXXX ones. (And also duplicated
the "fragment" names instead of using the "vertex" names.)
Fixes: 13b303ff92 "docs: Update the list of used MESA GL enums."
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
(Apologies for the double negative.)
For now, the shader cache is disabled by default on i965 to allow us
to verify its stability.
In other words, to enable the shader cache on i965, set
MESA_GLSL_CACHE_DISABLE to false or 0. If the variable is unset, then
the shader cache will be disabled.
We use the build-id of i965_dri.so for the timestamp, and the pci
device id for the device name.
v2:
* Simplify code by forcing link to include build id sha. (Matt)
v3:
* Don't use a for loop with snprintf for bin to hex. (Matt)
* Assume fixed length render and timestamp string to further simplify
code.
Cc: Matt Turner <mattst88@gmail.com>
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Drivers have supported KHR_no_error for a while. We'd been leaving it
marked as "in progress" because there's a zillion places that could get
slightly more optimized. But, Timothy and Samuel have already done
piles of work, and I think we have a solid implementation at this point.
Let's check it off the list.
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Suggested-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
These extensions are good for Vulkan interop, so track them.
Signed-off-by: Jakob Bornecrantz <jakob.bornecrantz@collabora.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
The intent is to use this extension on vc4 to allow X11 to do overlapping
CopyArea() within a pixmap without first blitting the pixmap to a
temporary. With associated glamor patches, improves x11perf
-copywinwin100 performance on a Raspberry Pi 3 from ~4700/sec to
~5130/sec, and is an even larger boost to uncomposited window movement
performance (most copywinwin100 copies don't overlap).
v2: Fix glIsEnabled() on the new enums.
v3: Drop the local spec since I'm upstreaming the spec.
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Noticed that we had two 0x8bb4 in the spec while grepping to find an open
slot in the MESA enums set. gl.xml had the right value.
Acked-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
This extension is effectively a backport of GLES3's internalformat
handling to GLES 1/2. It guarantees that sized internalformats specified
for textures and renderbuffers have at least the specified size stored.
That's a pretty minimal requirement, so I think it can be dummy_true and
exposed as a standard in Mesa.
As a side effect, it also allows GL_RGB565 to be specified as a texture
format, not just as a renderbuffer. Mesa had previously been allowing 565
textures, which angered DEQP in the absence of this extension being
exposed.
v2: Allow 2101010rev with sized internalformats even on GLES3, citing the
extension spec. Extend extension checks for GLES2 contexts exposing
with texture_float, texture_half_float, and texture_rg.
v3: Fix ALPHA/LUMINANCE/LUMINANCE_ALPHA error checking (GLES3 CTS
failures)
v4: Mark GL_RGB10 non-color-renderable on ES, fix A/L/LA errors on GLES2
with float formats.
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
"Driver" isn't a great word for what this layer is, it's effectively a
build-time choice about what OS you're targeting. Despite that both of
the extant backends totally ignore the display argument, the old code
would only set up the backend relative to a display.
That causes problems! One problem is it means eglGetProcAddress can
generate X or Wayland protocol when it tries to connect to a default
display so it can call into the backend, which is, you know, completely
bonkers. Any other EGL API that doesn't reference a display, like
EGL_EXT_device_query, would have the same issue.
Fortunately this is a problem that can be solved with the delete key.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
This uses all the existing code to calculate lod values for mip linear
filtering. Though we'll have to disable the simplifications (if we know some
parts of the lod calculation won't actually matter for filtering purposes due
to mip clamps etc.). For better or worse, we'll also disable lod calculation
hacks (mostly should make a difference for cube maps) always - the issue with
per-pixel lod being difficult is mostly because we then have different mipmaps
needed for the actual texel fetch, which isn't a problem with lodq.
We still use approximation for the log2 - for that reason I believe the float
part of the lod is only accurate to about 4-5 bits (and one bit less with 1d
textures actually) which is hopefully good enough (though d3d10 technically
requires 6 bits - could use quadratic interpolation instead of linear to get
8 bits or so).
Since lodq requires unclamped lod, we also have to move some sampler key
calculations to texture sampling code - even if we know we're going to access
mipmap 0 we still have to calculate lod and apply lod_bias for lodq.
Passes piglit ARB_texture_query_lod tests (after having fixed the test).
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Fixes: 6a8aa11c20 "st/omx_bellagio: Rename state tracker and option"
Cc: Gurkirpal Singh <gurkirpal204@gmail.com>
Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Andres Gomez <agomez@igalia.com>
Jason and I use this for debugging all the time. Recompiling the driver
to enable it is kind of annoying. It's a great thing to try along with
always_flush_batch=true and always_flush_cache=true to detect a class of
problems - namely, atoms listening to an insufficient set of dirty bits.
Reviewed-by: Matt Turner <mattst88@gmail.com>
When a batch is submitted, INTEL_DEBUG=bat prints a message indicating
which part of the code triggered the flush, and some statistics about
the batch/state buffer utilization.
It also decodes the batchbuffer in debug builds...which is so much
output that it drowns out the utilization messages, if that's all you
care about.
INTEL_DEBUG=submit now just does the utilization messages.
INTEL_DEBUG=bat continues to do both (as the message is a good indicator
that we're starting decode of a new batch).
v2: Rename from "flush" to "submit" (suggested by Chris) because we
might want "flush" for PIPE_CONTROL debugging someday.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Support for external egl drivers was dropped a few years ago.
Fixes: 209360bbb9 "egl/main: drop support for external egl drivers"
Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Instead of setting based on set/unset, allow users to use boolean values.
In the docs and tests, use `DISABLE=true` instead of `DISABLE=1` as it's
clearer IMO.
Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Instead of setting based on set/unset, allow users to use boolean values.
In the docs, use `NO_DRAWARRAYS=true` instead of `NO_DRAWARRAYS=1` as it's
clearer IMO.
Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Instead of setting based on set/unset, allow users to use boolean values.
In the docs, use `DISABLE=true` instead of `DISABLE=1` as it's clearer IMO.
Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Instead of setting based on set/unset, allow users to use boolean values.
In the docs, use `ALWAYS=true` instead of `ALWAYS=1` as it's clearer IMO.
Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Andres Gomez
Dave Airlie
Roland Scheidegger
Adam Jackson
Jordan Justen
Emil Velikov
Kenneth Graunke
Chris Wilson
Jakob Bornecrantz
Marek Olšák
Eric Anholt
Matt Turner
Juan A. Suarez Romero
Eric Engestrom
Eric Engestrom