Right now, just provides a cleaner way to get at the gpu-id, given the
separation between compiler and context. But we will need this also to
hold the reg-set for new register allocation.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Use a more standard priority-queue based scheduling algo. It is simpler
and will make things easier once we have multiple basic blocks and flow
control.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Use standard list_head double-linked list and related iterators,
helpers, etc, rather than weird combo of instruction array and next
pointers depending on stage. Now block has an instrs_list. In
certain stages where we want to remove and re-add to the blocks list
we just use list_replace() to copy the list to a new list_head.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
At least for now.. right now the instruction and instruction list
printing should suffice, and the re-working of ir3_block would require
a lot of changes in that code.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Use ir3_MOV() builder in a couple of spots, rather than open-coding the
instruction construction. Also add ir3_NOP() builder and use that
instead of open coding.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Rather than forcing everyone to provide their own definition of the symbol
provide a common (dummy) one.
This helps us resolve the build of the standalone pipe-drivers (amongst
others), which are missing the symbol.
Cc: Rob Clark <robclark@freedesktop.org>
Cc: "10.6" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
get_immediate will return a const reference, the requested immediate
isn't necessarily in the x slot. Make sure to use the swizzle.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: mesa-stable@lists.freedesktop.org
Previously, we used intrinsic->const_index[1] to represent "the number of
array elements to load" for load/store intrinsics. However, this set to 1
by every pass that ever creates a load/store intrinsic. Also, while it
might make some sense for registers, it makes no sense whatsoever in SSA.
On top of that, the i965 backend was the only backend to ever support it;
freedreno and vc4 just assert that it's always 1. Let's just delete it.
Signed-off-by: Jason Ekstrand <jason.ekstrand@intel.com>
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
Reviewed-by: Rob Clark <robclark@freedesktop.org>
It's a remnant of some old NV extension. Unused.
I also have a patch that removes predicates if anyone is interested.
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Our lower if/else pass was missed when converting NIR to use linked
lists rather than hashsets to track use/def sets.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
isaml needs to scale up coords based on LoD. Also fix bogus bary.f
varying # when there are non-bary frag shader inputs. And use sub.s of
a positive immediate rather than add.s of negative (since CP is better
about figuring out that those can be collapsed into the cat2 instr).
Signed-off-by: Rob Clark <robclark@freedesktop.org>
For now, completely flatten if/else blocks. That will almost certainly
change once we have flow control.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Basically just sync up the cmdstream emit parts to match the changes
already done on a3xx.
Also, fix scheduling for mem instructions. This is needed on a4xx, and
I am a bit surprised it isn't needed for a3xx.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Just build up arrays for src0/src1, and use create_collect()..
Also add back missing .3d flag for 3d/cube textures.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
I noticed some cases where we where trying to copy-propagate indirect
src's into places they cannot go, like 2nd src for cat3 (mad, etc).
Expand out valid_flags() to be aware of relativ flag, and fix up a few
related spots.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
When we get in a scenario where we cannot schedule any more instructions
due to address register conflict, clone the instruction that writes the
address register, and switch the remaining unscheduled users for the
current address register over to the new clone.
This is simpler and more robust than the previous attempt (which tried
and sometimes failed to ensure all other dependencies of users of the
address register were scheduled first).. hint it would try to schedule
instructions that were not actually needed for any output value.
We probably need to do the same with predicate register, although so far
it isn't so heavily used so we aren't running into problems with it
(yet).
Signed-off-by: Rob Clark <robclark@freedesktop.org>
A bit fugly.. try and make this cleaner.. note if we hoist all the
get_addr() out of the loop we can drop the hashtable and just use
create_addr()..
Signed-off-by: Rob Clark <robclark@freedesktop.org>
It probably *should* be an assert, but for now TGSI f/e isn't very good
about dealing w/ CONST vs ABS/NEG. So for debug builds, print a warning
instead of crashing with an assert for now.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Without this, a3xx breaks.. a4xx would too if it had already implemented
support for passing driver params.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
For a normal MAD (ie. not MADSH), if first source is gpr and second
source is const, we can swap the first two sources to avoid needing a
mov instruction.
This gives back the biggest advantage TGSI f/e had over NIR f/e for
common shaders, since TGSI f/e had this logic in the f/e. Note that
doing this in copy-prop step has the advantage that it will also work
for cases like:
MOV TEMP[b], CONST[x]
MAD TEMP[d], TEMP[a], TEMP[b], TEMP[c]
Signed-off-by: Rob Clark <robclark@freedesktop.org>
The NIR compiler frontend is an alternative to the TGSI f/e, producing
the same ir3 IR and using the same backend passes for scheduling, etc.
It is not enabled by default yet, as there are still some regressions.
To enable, use 'FD_MESA_DEBUG=nir'. It is enough to use with, for
example, xonotic or supertuxkart.
With the NIR f/e, scalarizing and a number of other lowering steps
happen in NIR, so we don't have to do them in ir3. Which simplifies the
f/e and allows the lowered instructions to pass through other
optimization stages.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Since NIR f/e currently encodes immediates in instructions (rather than
passing via const), we need to ensure that when const's are used the get
initialized to the proper values. Otherwise comparing NIR to TGSI
compiler, it will use proper immediate values in one case, and randomly
initialize values in the other. Which confuses ir3test.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Be smarter about propagating copies from const or immed, or with abs/neg
modifiers. Also, realize that absneg.s and absneg.f are really "fancy"
mov instructions.
This opens up the possibility to remove more copies. It helps the TGSI
frontend a bit, but will be really needed for the NIR f/e which builds
everything up in SSA form (ie. will *always* insert a mov from const or
immediate).
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Even though in the end, they map to the same bits, the backend will need
to be able to differentiate float abs/neg vs integer abs/neg. Rather
than making the backend figure it out based on instruction opcode (which
when combined with mov/absneg instructions, can be awkward), just split
out different flags for each so the frontend can signal it's intentions
more clearly. Also, since (neg) for bitwise op's is actually a bitwise-
not, split it out into bnot flag.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Add helpers for constructing SSA forms of instructions.
Only partial cat5/cat6 coverage.. but we can add stuff as needed.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
This complication is unnecessary and makes MRTs more complicated and
likely to generate tons of variants.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
One more case we need to handle. One of the src instructions for the
indirect could also end up being ourself.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Now that piglit is no longer falling back to old compiler for any tests,
we can remove it. Hurray \o/
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Deadlock can occur if we schedule an address register write, yet some
instructions which depend on that address register value also depend on
other unscheduled instructions that depend on a different address
register value. To solve this, before scheduling an address register
write, ensure that all the other dependencies of the instructions which
consume this address register are already scheduled.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Add an array_insert() macro to simplify inserting into dynamically sized
arrays, add a comment, and remove unused prototype inherited from the
original freedreno.git/fdre-a3xx test code, etc.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
This fixes ARB_texture_query_levels to actually return the desired
value.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Rob Clark <robclark@freedesktop.org>
Cc: "10.4 10.5" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Rob Clark <robclark@freedesktop.org>
Cc: "10.4 10.5" <mesa-stable@lists.freedesktop.org>
To simplify RA, assign arrays that are written to first. Since enough
dependency information is in the graph to preserve order of reads and
writes of array, so all SSA names for the array collapse into one, just
assign the entire thing by array-id.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Rob Clark
Rob Clark
Emil Velikov
Ilia Mirkin
Jason Ekstrand
Marek Olšák