Just create such an empty file if there isn't already.
So drivers that are expected to pass all tests don't need to commit an
empty results file.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Emma Anholt <emma@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10295>
Otherwise it is next to impossible to figure out *which* trace is
hanging (because you don't get artifact upload if the CI job hits the
overall 60min timeout).
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10490>
Finally LAVA users will be able to see deqp XMLs on failures from the
job's artifacts browser. This replaces a couple of one-off minio uploads
in the piglit runner.
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10297>
Among other things, this gets us GCC 10 (was 6).
Requires some changes to third party components we use:
* Install apitrace (& waffle) from Debian; was hitting issues with the
local build, and it's the same version 9.0 anyway.
* Update Fossilize to a newer commit which builds with GCC 10.
* apt.llvm.org repositories are no longer needed.
* Use an SPIRV-LLVM-Translator commit which builds with LLVM 11.0.1.
* Install XCB packages from Debian, 1.13 fails to build with Python 3.9.
* Install wayland-protocols from Debian, 1.12 is too old for
libgtk-3-dev in bullseye.
LLVM 7/8 packages are no longer available.
Also adapt expected test results to Xvfb now exposing multi-samle
GLXFBConfigs.
v2:
* Install clang instead of clang-11.
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/3124
Reviewed-by: Eric Anholt <eric@anholt.net> # v1
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9833>
Getting piglit to fit onto our test devices was proving difficult, and we
need the ability to handle flakes, so switch to the rust piglit runner
that @pepp wrote as part of the deqp-runner repo which gives us flake
detection, sharding across boards, fractional runs, and almost half the
runtime.
It doesn't handle piglit subtests yet, but if you can't run piglit's
python on your devices because it's too bloated and unstable, this is a
way forward.
Reviewed-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9468>
Commit bcea453d4a removed the summary from the expected piglit
results, but handling of results when using parallel jobs was also doing
the same, which ends up on removing too many lines from results.
Fixes: bcea453d4a ("ci/piglit: Stop including the test counts at the
end of expectations.")
Acked-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9286>
It's just a ton of fuss for driver developers fixing piglit tests. This
makes the trace expectation files pretty silly (empty expectation, but
you'll get a diff to a non-empty result when something fails)
Acked-By: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Acked-by: Adam Jackson <ajax@redhat.com>
Acked-by: Andres Gomez <agomez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9226>
This allows to split a piglit job in several parallel jobs, to speed up
the execution.
Due piglit restrictions, this only works for single profiles. Otherwise
an error will be shown in the runner.
Also, a new gitlab job variable `PIGLIT_TESTS` is introduced that
contains the excluded/included tests with `-x` or `-n`. The rest of the
piglit options go to `PIGLIT_OPTIONS` (like `--timeout n`).
v2 (Andres):
- Replay profile is supported in parallel jobs.
- Bail out inmediately if parallel jobs is tried with multiple
profiles.
- Use testlist only when doing parallel jobs.
- Do not drop pass tests when filtering executed tests.
- Get rid of PIGLIT_FRACTION.
v4:
- uncommit unrelated change (Andres).
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Reviewed-by: Andres Gomez <agomez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9022>
Once the extension fix is merged the CI results change appreciably.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-By: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9185>
I missed this regression in the "start using Xorg" branch since the piglit
runs are manual. I made the piglit runs accidentally require a core
context, which a5xx can't do (it's only GL 3.1).
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9144>
https://github.com/LunarG/gfxreconstruct/issues/328 and
https://github.com/LunarG/gfxreconstruct/issues/402 are already fixed
in the "master" branch.
Updated the piglit version so it supports this version.
Additionally, LunarG's VulkanTools are not built any more since
GFXReconstruct is now able to generate screenshots on its own without
using the VK_LAYER_LUNARG_screenshot layer.
v2:
- Explain the VulkanTools removal in the commit log (Martin).
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Juan A. Suarez <jasuarez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9032>
We are now using pages.
v2:
- Define a helper variable for the artifacts base URL (Juan).
Signed-off-by: Andres Gomez <agomez@igalia.com>
Acked-by: Eric Anholt <eric@anholt.net> [v1]
Reviewed-by: Juan A. Suarez <jasuarez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9092>
When running with baremetal, the results path becomes //results. The
unexpected double backslash causes troubles when using sed
later.
Signed-off-by: Andres Gomez <agomez@igalia.com>
Acked-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Juan A. Suarez <jasuarez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9092>
Add OpenGL and Vulkan testing for V3D and V3DV respectively.
Add also a couple of manual piglit jobs for V3D.
v2:
- Replace custom mustpass with running fraction of tests (Eric)
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8745>
The Vulkan spec says the following for vkCmdBeginTransformFeedbackEXT:
"For each element of pCounterBuffers that is VK_NULL_HANDLE, transform
feedback will start capturing vertex data to byte zero in the
corresponding bound transform feedback buffer."
While not quite as explicit, similar wording exists for
vkCmdEndTransformFeedbackEXT in "Valid Usage" section.
So, this means that we should handle NULL in this case, and simply
ignore the corresponding reads and writes.
This fixes a whole lot of crashes when using transform-feedback with
Zink.
Reviewed-by: Dave Airlie <airlied@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8982>
I cargo-culted these from the llvmpipe tests, but they seem to pass and
not take much time or memory at all, so let's try enabling them. If this
works fine, we might want to try the same for llvmpipe as well...
Reviewed-By: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8979>
The vulkan spec says the following about vkMapMemory:
"ppData is a pointer to a void * variable in which is returned a
host-accessible pointer to the beginning of the mapped range. This
pointer minus offset must be aligned to at least
VkPhysicalDeviceLimits::minMemoryMapAlignment."
So let's report the same value as the gallium-driver reports, otherwise
we'll fail to adhere to the alignment requirement.
This fixes a few Piglit failures for Zink.
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/4267
Reviewed-by: Dave Airlie <airlied@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8965>
Gives us 13 more passed tests.
(GALLIVM_PERF=nopt breaks some tests here)
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Acked-by: Dave Airlie <airlied@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4986>
Gives us 1 more passed test.
(GALLIVM_PERF=nopt breaks some tests here)
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Acked-by: Dave Airlie <airlied@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4986>
We were using surfaceless, which misses out on some useful coverage we'd
like to have in the GLX/EGL piglit tests, but more importantly prevented
many traces from running.
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8727>
This adds a couple of jobs to execute piglit testsuite in VC4
(quick_shader and quick_gl profiles).
It is defined as a manual test as it takes time to execute them.
v2:
- Add more excluded tests (Eric)
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Acked-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8702>
This one test seems to be destroying the world, and causing massive
flakeyness, and is generally more a recovery/GMU stress test than
anything.
See #4159
Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8659>
Disabling process isolation causes a random set of tests to be
spuriously skipped. The set of skipped tests can change when piglit is
rebuilt (even from the same Git commit), which can make docker image
rebuilds painful. (Not to mention the reduced testing coverage due to
the skipped tests)
One downside of this change is that the arm64_a630_piglit_shader job
now takes almost 10 minutes.
v2:
* Change arm64_a530_piglit_shader job as well, but make it run manually
on branches of forked repositories only, since it takes almost 20
minutes now. (Eric Anholt)
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8611>
Pulls in test fixes for rasterpos on softpipe and for
simple-barrier-atomics on freedreno. Note that many xfail-vs-xskips end
up changing, because apparently the
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8499>
Each transform feedback target should have a separate buffer
for an offset from which to resume, instead of just having
one buffer per binding point. Otherwise, if transform feedback
is paused and other tf object is bound - the offset of the
previous tf object would be lost.
Fixes CTS tests:
dEQP-GLES3.functional.transform_feedback.*triangles*
Fixes Piglit tests:
gl-3.1-primitive-restart-xfb flush
gles-3.0-transform-feedback-uniform-buffer-object
arb_transform_feedback2-change-objects-while-paused
arb_transform_feedback2-change-objects-while-paused_gles3
ext_transform_feedback-intervening-read
Signed-off-by: Danylo Piliaiev <dpiliaiev@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8281>
Each transform feedback target should have a separate buffer
for an offset from which to resume, instead of just having
one buffer per binding point. Otherwise, if transform feedback
is paused and other tf object is bound - the offset of the
previous tf object would be lost.
Fixes Piglit tests:
arb_transform_feedback2-change-objects-while-paused
arb_transform_feedback2-change-objects-while-paused_gles3
ext_transform_feedback-alignment 4
ext_transform_feedback-alignment 8
ext_transform_feedback-alignment 12
ext_transform_feedback-change-size offset-grow
ext_transform_feedback-change-size offset-shrink
ext_transform_feedback-change-size range-grow
ext_transform_feedback-change-size range-shrink
ext_transform_feedback-immediate-reuse-uniform-buffer
ext_transform_feedback-position *
Signed-off-by: Danylo Piliaiev <dpiliaiev@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8281>
These bring a whole lot of new coverage to these drivers, since dEQP is
bad at desktop GL feature coverage around early GL 3.x. piglit also gets
at a lot of MSAA, fast clearing, and texture layout issues that dEQP
doesn't do much with.
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7370>
Tomeu Vizoso
Rob Clark
Eric Anholt
Michel Dänzer
Matt Turner
Juan A. Suarez Romero
Dave Airlie
Andres Gomez
Hoe Hao Cheng
Erik Faye-Lund
Mike Blumenkrantz
Danylo Piliaiev