Vulkan allows us to, in theory, support ycbcr on single-plane formats if
the client really wants it. Also, these functions should work on a
multi-plane color image as long as the client specifies the right
aspect. This gets rid of our usage of can_ycbcr outside of anv_image.c.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12141>
In the compute dispatch path we do not allocate a huge amount
of space to cover everything so the individual functions have to
allocate. This was missing here, causing a hang in Cyberpunk when
accessing the system menu at some locations with thread tracing
enabled.
Fixes: bd1186572f ("radv: add support for push constants inlining when possible")
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12271>
Lots of the MAX2 args end up subtracting two unsigned numbers, which
blows up when the result is negative.
Fixes: 4c99d6ff54 ("radv: flush L2 for images affected by the pipe misaligned issue on GFX10+")
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12272>
If we return inside a pan_pack() the descriptor packing doesn't happen.
Cc: mesa-stable
Fixes: 8ba2f9f698 ("panfrost: Create a blitter library to replace the existing preload helpers")
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12239>
The spill base setting instructions (which includes some uniforms) are
added in the entry block, not in the current block. When ldunif
optimization is applied, the cursor is pointing to instructions in the
entry block, but the current block is a different one. This leads to a
heap-buffer-overflow when going through the list of instructions
(detected by the address sanitizer).
Thus change the current block to entry block, and restore it after the
setup is done.
This fixes
dEQP-VK.ssbo.readonly.layout.single_struct.single_buffer.std430_instance_array_comp_access_store_cols
with address sanitizer enabled.
v2:
- Set current block instead of disabling ldunif optimization (Iago)
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12221>
When this flag is set, u_threaded_context will try not to map it directly
for better buffer placement. It's set by drivers when visible VRAM is too
small.
Reviewed-By: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12257>
Both nir_opt_algebraic and nir_opt_idiv_const have optimizations for
umod/imod/irem by constants.
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12039>
This lowering is smaller and -INT64_MIN is probably UB (signed overflow).
No fossil-db changes.
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12039>
ineg(INT_MIN)/iabs(INT_MIN) won't work as expected.
No fossil-db changes.
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12039>
If "a" is a multiple of "b", then the result would have been "b" instead
of 0.
No fossil-db changes.
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Fixes: 0ef5f3552f ("nir: add strength reduction pattern for imod/irem with pow2 divisor.")
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12039>
We shouldn't overwrite the clear value of the other aspect (in case
separate depth/stencil layouts are used).
Found by inspection.
Cc: 21.2 mesa-stable
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12222>
If a shader has code like this:
uniform float timestamp;
...
if (timestamp > 0.0)
do_something()
And timestamp is modified each frame, we'll end up generating a new
variant per frame.
This commit introduces a hard limit on the number of variants we generate
for a single shader.
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/5121
Fixes: b7501184b9 ("radeonsi: implement inlinable uniforms")
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12138>
This allows to easily run a subset of the tests without having
to figure out which test suite(s) they belong to.
dEQP cannot use this option because currently "deqp-runner suite"
don't have it.
Acked-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12215>
This line was dropped in the last refactoring. We need
to clearly state to the user if the new results are
different to the expected ones.
Acked-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12215>
FMASK_DECOMPRESS can't eliminate DCC fast clears. This will allow to
enable DCC MSAA fast clears that require a FCE.
Only supported on GFX10+.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12180>
These two bits were added in 2012, but never got wired up. Let's cut our
losses, and remove them again. 9 years unused seems sufficient.
While we're at it, remove reduction_mode from the hacks-section, because
this isn't a hack at all, rather normal state.
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12240>
Through some exhaustive searching, I've found that our log2 approximation
is precise to around 3.5 bits. And the squaring step should increase the
result with one bit, leaving us with 4.5 bits of precision.
Reporting the right mipmap precision fixes a few CTS-tests.
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12238>
This commit reverts 58e9371141 as now iris driver can import stencil.
This makes ext_external_objects-vk-stencil-display pass and X-Plane 11
vulkan rendering backend to work with anv + iris.
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Eleni Maria Stea <elene.mst@gmail.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10609>
This makes import easier on different gfx generations and we don't
have to lock down on a certain aux layout just yet.
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10609>
This is similar to u_transfer_helper wrap but implemented in
the driver as the layout between drivers can vary.
v2: remove else, simplify (Rohan, Eleni)
v3: add hiz surface support when importing depth buffer
v4: use iris_resource_configure_aux_offsets for setting
aux offsets for depth
v5: introduce helper for configuring imported memobj aux
offsets and utilize that
v6: simplify, remove aux support for now
v7: cleanups, fix offset calculation (Nanley)
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10609>
11 instructions, but now processes up to 4 channels at once (since TGSI
splits to scalar for these math ops) while being higher accuracy.
Previously we used 6 instructions per channel, but it didn't look like a
sine wave. i915c managed it in 9 instructions per scalar channel, thanks
to avoiding an extra mov we do for the fabs (should be fixable), and
avoiding an extra MUL (maybe just needs reassociation of our immediates?).
But, the ALU count win from doing 4 channels at once will be way more
important for making sure that programs compile than those 2 ALU ops, plus
now we do it in NIR instead of assembly.
Closes: #4981
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12250>
Restore part of the perfetto documentation deleted by mistake.
Signed-off-by: Antonio Caggiano <antonio.caggiano@collabora.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11846>
When transcoding a video, the context used by decode/postproc process
might be different from that of the encoder, but we encoder needs to
know if deinterlacing was used.
Fixes: c5088b4972 ("gallium: Fix VAAPI postproc blit")
Signed-off-by: Thong Thai <thong.thai@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12251>
Jason Ekstrand
Mike Blumenkrantz
Bas Nieuwenhuizen
Boris Brezillon
Juan A. Suarez Romero
Marek Olšák
Samuel Pitoiset
Rhys Perry
Pierre-Eric Pelloux-Prayer
Erik Faye-Lund
Tapani Pälli
Emma Anholt
Dmitry Baryshkov
Filip Gawin
Antonio Caggiano
Thong Thai