Before, we bailing in assign_constant_locations based on the minimum
dispatch size. The more direct thing to do is simply to check for
whether or not we have constant locations and bail if we do. For
nir_setup_uniforms, it's completely safe to do it multiple times because
we just copy a value from the NIR shader.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
This is what we really wanted all along. Always retyping to D works
because that's what get_nir_src() always gives us, at least for 32-bit
types. The SPIR-V variants of these operations accept arbitrary types
and we need this if we're going to handle 64 or 16-bit values.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
The index is any value provided by the shader and this can be called in
non-uniform control flow so we can't just take component 0. Found by
inspection.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Stop retyping the output of shuffle_64bit_data_for_32bit_write. It's
always BRW_REGISTER_TYPE_D which is perfectly fine for writing out.
Also, when we change get_nir_src to return something with a 64-bit type
for 64-bit values, the retyping will not be at all what we want. Also,
retyping the output based on src.type before we whack it back to 32 bits
is a problem because the output is always 32 bits.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
All callers of this function allocate a fs_reg expressly to pass into
it. It's much easier if we just let the helper allocate the register.
While we're here, we switch it to doing the MOVs with an integer type so
that we don't accidentally canonicalize floats on half of a double.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
The swizzles weren't doing any good because swiz is just XYZW. Also, we
were emitting an extra set of MOVs because shuffle_64bit_data_for_32bit
already does a MOV for us. Finally, the temporary was only ever used
inside the inner loop so there's no need for it to actually be an array.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Some hardware (CHV, BXT) have special restrictions on register regions
when doing integer multiplication. We want to respect those when we
lower to DxW multiplication.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Cc: mesa-stable@lists.freedesktop.org
The same workaround we need for 64-bit values on little core also takes
care of the Ivy Bridge problem and does so a bit more efficiently so we
can drop that code while we're here.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Cc: mesa-stable@lists.freedesktop.org
We're not using broadcast for any 32-bit types right now since we mostly
use it for emit_uniformize on 32-bit buffer indices. However, SPIR-V
subgroups are going to need it for 64-bit so let's make it work.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
This means we have to drop const from a variable but it also means that
100% of the code which deals with the offset limit is in one place.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
These restrictions effectively already existed due to the way we use
indirect sources but weren't being directly enforced.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
For some reason, the any/all predicates don't work properly with SIMD32.
In particular, it appears that a SEL with a QtrCtrl of 2H doesn't read
the correct subset of the flag register and you end up getting garbage
in the second half. Work around this by using a pair of 1-wide MOVs and
scattering the result. This fixes the any/all instructions for SIMD32.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Cc: mesa-stable@lists.freedesktop.org
The any/all intrinsics return a boolean value so D or UD is the correct
type. Unfortunately, get_nir_dest has the annoying behavior of
returnning a float type by default. This causes format conversion which
gives us -1.0f or 0.0f in the register. If the consumer of the result
does an integer comparison to zero, it will give you the right boolean
value but if we do something more clever based on the 0/~0 assumption
for booleans, this will give the wrong value.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Cc: mesa-stable@lists.freedesktop.org
In fragment shaders f0.1 is used for discards so doing ballot after a
discard can potentially cause the discard to not happen. However, we
don't support SIMD32 fragment shaders yet so this isn't a problem.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Cc: mesa-stable@lists.freedesktop.org
We have ANY/ALL32 predicates and, for the most part, they work just
fine. (See the next commit for more details.) Also, due to the way
that flag registers are handled in hardware, instruction splitting is
able to split the CMP correctly. Specifically, that hardware looks at
the execution group and knows to shift it's flag usage up correctly so a
2H instruction will write to f0.1 instead of f0.0.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Cc: mesa-stable@lists.freedesktop.org
Before, we were careful to place the zip after the last of the split
instructions but did unzip on-demand. This changes things so that the
unzips go before all of the split instructions and the unzip comes
explicitly after all the split instructions. As a side-effect of this
change, we now emit the split instruction from highest SIMD group to
lowest instead of low to high. We could have kept the old behavior, but
it shouldn't matter and this made the code easier.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Cc: mesa-stable@lists.freedesktop.org
This makes it far more explicit where we're inserting the instructions
rather than the magic "before and after" stuff that the emit_[un]zip
helpers did based on block and inst.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Cc: mesa-stable@lists.freedesktop.org
Register strides higher than 4 are uncommon but they can happen. For
instance, if you have a 64-bit extract_u8 operation, we turn that into
UB -> UQ MOV with a source stride of 8. Our previous calculation would
try to generate a stride of <32;8,8>:ub which is invalid because the
maximum horizontal stride is 4. To solve this problem, we instead use a
stride of <8;1,0>. As noted in the comment, this does not work as a
destination but that's ok as very few things actually generate that
stride.
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Cc: mesa-stable@lists.freedesktop.org
The lod clamping is what limits you between base and last level, and the
base level field is just there to help decide where the min/mag change
happens.
Fixes tex-miplevel-selection GL2:texture()
The ordering of the values was even less obvious than I thought, with both
the mip filter and the min filter being in different bits depending on
whether the mip filter is none.
Fixes piglit fs-textureLod-miplevels.shader_test
The HW doesn't pad the slice's height to make a full 4x4 group of UIF
blocks. We just need to pad to columns, and the start of the next column
appears in the bottom of the previous column's last block.
Fixes piglit fs-textureOffset-2D.
This is so much more pleasant to write than the manual
V3D33_whatever_pack() calls, and will be useful for when we start doing
actual per-V3D compiles.
As with blending, we'll have the bit flagged again when it gets reenabled
in CONFIGURATION_BITS, so there's no need to emit test state if we're not
testing.
Groups containing fields smaller than a byte probably not being decoded
correctly. For example:
<group count="32" start="32" size="4">
<field name="Vertex Element Enables" start="0" end="3" type="uint"/>
</group>
gen_field_iterator_next would properly walk over each element of the
array, incrementing group_iter. However, the code to print the actual
values only considered iter->field->start/end, which are 0 and 3 in the
above example. So it would always fetch bits 3:0 of the current byte,
printing the same value over and over.
Cc: Eric Anholt <eric@anholt.net>
The HW puts the pad bits at the top for DEPTH_COMPONENT24, but we need it
at the bottom for texturing. Using the format with stencil probably means
we won't be able to do Z24 and separate S8, but I wasn't planning on
supporting that anyway.
Fixes hiz-depth-read-fbo-d24-s0
I saw VK_IMAGE_ASPECT_ANY_COLOR_BIT while hacking anv_formats.c and got
confused. "Huh? What extension added that?". No extension defines it;
anv_private.h defines it.
To remove confusion, rename the anv-private VK tokens as if they were
extension tokens with the ANV vendor suffix.
I found only two such tokens:
VK_IMAGE_ASPECT_ANY_COLOR_BIT
VK_IMAGE_ASPECT_PLANES_BITS
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
In anv_physical_device_get_format_properties().
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Jason Ekstrand
Eric Anholt
Kenneth Graunke
Chad Versace
Marek Olšák