We disabled presentation a while back because it's so expensive for gitlab
to parse it on the other side. We may have a use for it some day if
gitlab gets better, but for now let's not spend the time processing it.
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3883>
When bringing up a new board or starting a new GLES version, we have a lot
of unexpected fails to document, so we need the full list in the log (not
just deqp-runner.sh's head -n 50) so we can populate the xfail list.
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3883>
LAVA finds a '#' early in boot and races to emit its shell commands.
Apparently for the current boards those serial commands end up getting
buffered such that things work out, but for db410c and db820c, the buffer
is lost and LAVA gets stuck waiting for the prompt. By setting a prompt,
we can delay our commands until we're actually supposed to emit them (and
suppress a complaint from the lava dispatcher that we're using a risky
prompt!)
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3883>
Introduce automated testing of Mesa by replaying traces with Renderdoc
or Apitrace.
For now only LLVMPipe is tested, but other drivers can be tested if
there's runners with the necessary hardware.
Signed-off-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/2935>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/2935>
Some dEQP tests have started passing and it's taking a while to update
the expectations and skips list.
Disable for now so CI doesn't fail and stuff can be merged.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Vasily Khoruzhick <anarsoul@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/2935>
clear info is needed when submit flush and may be changed after
framebuffer switch, so we need to move it into submit.
This also fixes 5 dEQP tests as a side effect: clear info is per
submit so clear value when one submit won't affect next submit.
v2:
remove fixed dEQP test from CI list.
Reviewed-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3755>
On a daily basis I've been having to restart people's a630 jobs in the
front couple of pages of /merge_requests due to spurious failures from our
flaky tests, and fielding reports of spurious fails from other developers,
and babysitting my own marge merges that are failing due to our flakes.
Nobody should have to deal with that, especially not non-freedreno
developers, so just scrape the list of flakes reported to #freedreno-ci
for the last month and ban those tests that have failed more than once
until we have a credible fix.
Acked-by: Kristian H. Kristensen <hoegsberg@google.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3662>
Using LLVM 8 for ppc64el and 7 for s390x (which hits some coroutine
related issues with LLVM 8).
There are some test failures we need to ignore for now. Also, the
timeout needs to be bumped from the default 30s for some tests, because
they can take longer under emulation.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3643>
The motivation for this is that we want to make use of the meson cross
files in this script, which have the ccache compiler paths.
We need to remove the ccache directory at the end, it would just waste
space in the image for no benefit.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3643>
The ssa doesn't need to be manually added to block->comp->reg_list.
Doing so actually causes other registers to be marked as undef=true
later.
This patch alone fixes a few deqp tests that have undefs.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Reviewed-by: Vasily Khoruzhick <anarsoul@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3502>
nir can output writes to dead registers when expanding vec4 operations
to non-ssa registers. In that case, some components of the vec4 may be
assigned but never read. These are also not currently removed by a nir
dead code elimination pass as they are not ssa.
In order to prevent regalloc from allocating a live register for this
operation, an interference must be assigned to it during liveness
analysis.
This workaround may be removed in the future if the assignments to dead
components can be removed earlier in ppir or nir.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Reviewed-by: Vasily Khoruzhick <anarsoul@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3502>
This is not always ->rgbBits, because there are cases where that could
be 32 but we're (legally) bound to a depth-24 pixmap. The important
thing to have match here is the actual server-side notion of depth. You
can look this up (at modest expense) from the xlib visual info if the
fbconfig has a visual. But it might not, so if not, fetch it (at
slightly greater expense) from XGetGeometry. Do this at GLX drawable
creation so you don't have to do it on the SwapBuffers path.
Apparently this fixes glx/glx-swap-singlebuffer, which is unintentional
but quite pleasant.
Fixes: mesa/mesa#2291
Fixes: 90d58286 ("drisw: Fix and simplify drawable setup")
Reviewed-by: Eric Anholt <eric@anholt.net>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3305>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3305>
Amend fails and skips lists basing on lists from Andreas Baierl,
shard mali400 job across two devices since it takes close to 10min
and rename jobs to lima-mali400-test and lima-mali450-test.
Also don't set MESA_GLES_VERSION_OVERRIDE=3.0 for lima since we don't support
GLES 3.0 and lower DEQP_PARALLEL to 3 for jobs on H3.
Keep mali400 jobs disabled atm since they take too much time to complete
and we also get some unexplicable failures in dEQP-GLES2.functional.default_vertex_attrib.*
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3163>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3163>
deqp-runner.sh uses it to determine whether we split job across multiple
devices and if we do what's the node index.
With this change we now can set 'parallel: N' in job description if we want
to split the job.
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3163>
Use the normal build job to also prepare the artifacts for LAVA jobs.
For that, the build container needs to also build the test suites,
kernel, ramdisk, etc.
Then the build job will place the just-built Mesa in the ramdisk and the
test job can generate a LAVA job and point to those artifacts.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3295>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3295>
They're not available for Debian buster yet, so we have to use upstream
snapshot packages again.
In contrast to earlier, we now store the LLVM APT repository key in Git
instead of re-downloading it every time.
Take one step towards sharing code between the LAVA and non-LAVA jobs,
with the goals of reducing maintenance burden and use of computational
resources.
The env var DEQP_NO_SAVE_RESULTS allows us to skip the procesing of the
XML result files, which can take a long time and is not useful in the
LAVA case as we are not uploading artifacts anywhere at the moment.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
I'm honestly unsure what this is for, but it's needed on MFBD systems
for unknown reasons, at least when MRT is actually in use and then
sometimes without MRT (it fixes a blend shader issue on T760?)
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Tomeu Visoso <tomeu.vizoso@collabora.com>
I feel really bad about this but this one test is flaking. I don't want
to do a mass revert (and bisection is extremely difficult with
nondeterministic/Heisenbugs), but it's Friday night and master needs to
pass. This commit should be reverted asap (once the flake is solved)
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
We'll need this so we can allocate a stack for the batch large enough
for all the jobs within it.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Eric Anholt
Roland Scheidegger
Alexandros Frantzis
Tomeu Vizoso
Qiang Yu
Dave Airlie
Michel Dänzer
Rhys Perry
Kristian H. Kristensen
Erico Nunes
Adam Jackson
Matt Turner
Neil Armstrong
Vasily Khoruzhick
Rob Clark
Alyssa Rosenzweig
Rohan Garg