v2: Don't leak __DRI_IMAGE_FOURCC_RGBA16161616 to applications.
v3: Fix typo in __DRI_IMAGE_FOURCC_RGBA16161616 table entry.
v4: Add the Y412 and Y416 tests to the A530 expected fail list. Many
YUV image import tests fail on this platform, and nobody has been able
to investigate why.
v5: Update the comment describing the zeroed bits in Y412. Suggested by
Emma.
v6: Add all Y41x test to the rpi3 expected fail list.
Reviewed-by: Emma Anholt <emma@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9610>
s/are may be/might be/
Also add a missing comma.
v2: Also s/its/it's/. Suggested by Nanley.
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
Reviewed-by: Emma Anholt <emma@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9610>
With the addition of createImageWithModifiers usage flags were
dropped, as it was believed at the time that modifers will be a
full replacement for the usage flags. This has turned out to be
untrue, as modifiers are not able to describe buffer placement.
Add a new version of the interface, that allows to specifiy
use flags in addition to the modifier.
Signed-off-by: Simon Ser <contact@emersion.fr>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8106>
This change adds a gallium D3D10 state tracker that works as a WDDM UMD
software driver, similar to Microsoft WARP, but using llvmpipe/softpipe.
The final deliverable is a d3d10sw.dll, which is similar to WARP's
d3d10warp.dll.
This has been used to run Microsoft Windows HCK wgf11* tests with
llvmpipe, and they were at one point passing 100%.
Known limitations:
- TGSI (no NIR)
- D3D10 only (no D3D11 support yet)
- no WINE integration (WINE doesn't implement WDDM DDI.)
For further details see:
- src/gallium/frontends/d3d10umd/README.md
- src/gallium/targets/d3d10sw/README.md
v2: Drop the DXBC-based disassembly. Add missing break statements.
v3: Incorporate Jesse's feedback.
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Acked-by: Jesse Natalie <jenatali@microsoft.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10687>
Pull in the header from drm-next commit
32c3d9b0f51ee1e6bb0160496b97e50b5caca4d0. Among other things, this
brings in the I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC modifier.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9230>
This brings in the following extensions:
- VK_KHR_workgroup_memory_explicit_layout
- VK_KHR_zero_initialize_workgroup_memory
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8699>
The callback may be used by dri drivers to perform cleanup when images
are destroyed. It is added to the dri2 and image loader extensions.
Signed-off-by: David Stevens <stevensd@chromium.org>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7805>
The classic OSMesa renders directly into user memory using
src/mesa/swrast, while gallium OSMesa renders using softpipe or llvmpipe
and copies out at glFlush() time. This would make gallium look like a
worse choice for OSMesa, except that swrast is:
1) Painfully slow to render compared to llvmpipe
2) Incorrect at derivatives
3) Limited to GL 2.1 instead of GL 4.6
In my survey of OSMesa users, debian was the remaining holdout with
classic OSMesa in use on hurd and some rare non-LLVM-supported
architectures (sh4, alpha, etc.). As of today, they've switched to
softpipe-based gallium OSMesa for them.
To prevent people from running the wrong OSMesa (to the extent that
running OSMesa can ever be the right thing), delete the classic
version.
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Closes: #320Closes: #877Closes: #2297
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/1243>
This brings in the following new extensions:
- VK_KHR_deferred_host_operations
- VK_KHR_pipeline_library
- VK_KHR_acceleration_structure
- VK_KHR_ray_tracing_pipeline
- VK_KHR_ray_query
Acked-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Acked-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7734>
The DCC_MAX_COMPRESSED_BLOCK has to contain one of
AMD_FMT_MOD_DCC_BLOCK_* and with 3 values this doesn't
fit in 1 bit.
Fix this cleanly while it is only in drm-next.
Fixes: 2cc2b45688 "drm-uapi: Add AMD modifiers."
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7607>
This adds modifiers for GFX9+ AMD GPUs.
As the modifiers need a lot of parameters I split things out in
getters and setters.
- Advantage: simplifies the code a lot
- Disadvantage: Makes it harder to check that you're setting all
the required fields.
The tiling modes seem to change every generatio, but the structure
of what each tiling mode is good for stays really similar. As such
the core of the modifier is
- the tiling mode
- a version. Not explicitly a GPU generation, but splitting out
a new set of tiling equations.
Sometimes one or two tiling modes stay the same and for those we
specify a canonical version.
Then we have a bunch of parameters on how the compression works.
Different HW units have different requirements for these and we
actually have some conflicts here.
e.g. the render backends need a specific alignment but the display
unit only works with unaligned compression surfaces. To work around
that we have a DCC_RETILE option where both an aligned and unaligned
compression surface are allocated and a writer has to sync the
aligned surface to the unaligned surface on handoff.
Finally there are some GPU parameters that participate in the tiling
equations. These are constant for each GPU on the rendering/texturing
side. The display unit is very flexible however and supports all
of them :|
Some estimates:
- Single GPU, render+texture: ~10 modifiers
- All possible configs in a gen, display: ~1000 modifiers
- Configs of actually existing GPUs in a gen: ~100 modifiers
For formats with a single plane everything gets put in a separate
DRM plane. However, this doesn't fit for some YUV formats, so if
the format has >1 plane, we let the driver pack the surfaces into
1 DRM plane per format plane.
This way we avoid X11 rendering onto the frontbuffer with DCC, but
still fit into 4 DRM planes.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6176>
This enables GL applications to be written without any involvement of
Xlib.
EGL X11 platform is actually already xcb-only underneath, so this commit
just add the necessary interface changes so eglDisplay can be created
from a xcb_connection_t.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Yuxuan Shui <yshuiv7@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6474>
This will be useful to enable extension overriding as a drirc option.
v2 (Adam Jackson):
- Rename from configQuerystr to configQuerys for symmetry
- Increase the version number of the interface
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Martin Peres <martin.peres@mupuf.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7212>
This header is used in anv and radv, and soon turnip. Since the script
just checks out master, this also bumps the headers to upstream
02dfcc7c1562 ("Merge "Merge Android R"")
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6821>
The enables removal of gen_device_info::is_cannonlake.
v2: Remove GEN10_FEATURES and GEN10_HW_INFO macros. Suggested by
Lionel.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6899>
From drm-next at the following commit :
commit 3393649977f9a8847c659e282ea290d4b703295c
Merge: cbc2e82932ae ced026e959be
Author: Dave Airlie <airlied@redhat.com>
Date: Fri Aug 28 13:51:30 2020 +1000
Merge tag 'drm-intel-next-2020-08-24-1' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/2901>
Renaming makes it easier to relate a pciid with device configuration.
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
There is only one queue for now, so for non-shared semaphores, the
implementation is basically a no-op. For shared semaphores, this
always uses syncobjs. This depends on syncobj support in the msm
kernel driver.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/2769>
Kernel support for DG1 has not yet been merged upstream; per our
long-standing DRM subsystem policy, we should not enable the platform
in userspace until the kernel patches are merged and functional.
We will re-enable this in the future. In the meantime, we retain all
of the infrastructure and code for the platform so that we can continue
developing DG1 support in upstream.
See a discussion here:
https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4956#note_547775
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5617>