v2: Make sure that with num_lods > 1 and min_filter != mag_filter we
still enter the splitting path. So this case would still use 4-wide aos
path (as a side note, the 4-wide aos sampling path could actually be
improved quite a bit if we have avx2, by just doing the filtering with
256bit vectors).
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
_eglInitSync checked that the display supported the sync type (such as
EGL_SYNC_FENCE), and did it wrong. When the check failed it emitted
EGL_BAD_ATTRIBUTE, but sometimes EGL_BAD_PARAMETER is needed.
_eglCreateSync already does the error checking, and it does it right.
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
When the function encountered an error, it effectively returned
immediately. However, it did so indirectly by breaking out of a loop.
Replace the loop breakout with a explicit 'return'.
Do the same for _eglParseSyncAttribList64 too.
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
This function converts an attribute list from EGLint[] to EGLAttrib[].
Will be used in following patches to cleanup EGLSync attribute parsing.
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
When the user called eglCreateSync64KHR on a display without
EGL_KHR_cl_event2 (the only extension that exposes it), we returned
EGL_NO_SYNC but did not update the error code.
We also did the same for eglCreateSync on a display without EGL 1.5.
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
The function stores EGLAttrib values in EGLint variables. On 64-bit
systems, this truncated the values.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
On the error path, eglGetSyncAttribKHR neglected to unlock the
EGLDisplay before returning.
Fixes deadlock in dEQP-EGL.functional.fence_sync.invalid.get_invalid_value.
Cc: mesa-stable@lists.freedesktop.org
Cc: Mark Janes <mark.a.janes@intel.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
This patch causes 2 regressions in khronos' gles cts tests
on various intel platforms.
Failing tests:
ES3-CTS.functional.state_query.integers.viewport_getinteger
ES3-CTS.functional.state_query.integers.viewport_getfloat
Here is an explanation of what's causing the failures:
CTS tests are not clamping the x, y location of the viewport's
bottom-left corner as recommended by ARB_viewport_array and
OES_viewport_array:
"The location of the viewport's bottom-left corner, given by (x,y), are
clamped to be within the implementation-dependent viewport bounds range.
The viewport bounds range [min, max] tuple may be determined by
calling GetFloatv with the symbolic constant VIEWPORT_BOUNDS_RANGE_OES"
Khronos CTS merge request to fix the test case:
https://gitlab.khronos.org/opengl/cts/merge_requests/399
V2: Initialize the relevant variables for GL_OES_viewport_array on gen8+
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Specified by subclause 7.3.4
v2: get the loop optimized
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
For reference picture sets, there are cases that rps will not always
be used. Once detect the unused flag from encoded bitstream, we should
not add this rps to any list, otherwise pass the incorrect reference
and skip the correct rps.
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
It will fix the corruption for frame, that only has one stort term ref
picture set, we set NULL rps for this case previously, causing taking
incorrect reference. Instead we should take that only short term set
as reference
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
The video size from format container is not always compatible with
the size from codec bitstream, the HW decoder should take the size
information from bitstream, otherwise the corruption appears with clip
that has different size info between bitstream and format container
So we are passing width(height)_in_samples from sequence parameter
set to video decoder.
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
This reverts commit fc03ecfeaf.
Chad had already pushed the same change between me posting the patch and Jason
pushing it: 44bcf1ffcc (".gitignore: Ignore src/compiler/spirv2nir")
Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This is enabled automatically if shader printing is enabled, or separately
by R600_DEBUG=checkir. Catch mal-formed IR before it crashes in a later
pass.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
This changes the order of basic blocks to be equal to the order of code in the
original TGSI, which is nice for making sense of shader dumps.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Some of the existing code is needlessly complicated. The basic principle
should be: control-flow opcodes emit branches to properly terminate the
current block, _unless_ the current block already has a terminator (which
happens if and only if there was a BRK or CONT).
This also fixes a bug where multiple terminators were created in a block.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97887
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Really fix the bug that was supposed to be fixed by commits 3e7cced4b and
a48bf02d: even when virtual addresses are used, the legacy relocation-based
method with offsets relative to the kernel's buffer object are used for
video submissions.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97969
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
I guess this is not needed because dead code elimination removes
the declaration.
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
We can finally do this, because the opcodes are scalar now.
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
si_llvm_emit_ddxy is called once per element, so we don't have to generate
code for 4 elements at once.
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
do it at bind time, so that pipe_sampler_view is immutable with regard to
buffer reallocations and we don't have to remember all existing buffer
views.
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
similar to gl_buffer_object::UsageHistory
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>