When creating an egl surface from an ANativeWindow, the window's usage
flags need to be set so that buffers are allocated properly.
Signed-off-by: David Stevens <stevensd@chromium.org>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Lepton Wu <lepton@chromium.org>
This supports powering up the device (using an external tool you
provide based on your particular lab), talking over serial to wait for
the fastboot prompt, and then booting a fastboot image on a target
device.
I was previously relying on LAVA for this, but that ran afoul of
corporate policies related to the AGPL. However, LAVA wasn't doing
too much for us, given that gitlab already has a job scheduler and
tagging and runners. We were spending a lot of engineering on making
the two systems match up, when we can just have gitlab do it directly.
Lightly-reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4076>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4076>
The debian firmware package doesn't actually contain it, costing us a
minute of boot time waiting for it to show up.
Lightly-reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4076>
Knowing following:
- CMP writes to flag register the result of
applying cmod to the `src0 - src1`.
After that it stores the same value to dst.
Other instructions first store their result to
dst, and then store cmod(dst) to the flag
register.
- inst is either CMP or MOV
- inst->dst is null
- inst->src[0] overlaps with scan_inst->dst
- inst->src[1] is zero
- scan_inst wrote to a flag register
There can be three possible paths:
- scan_inst is CMP:
Considering that src0 is either 0x0 (false),
or 0xffffffff (true), and src1 is 0x0:
- If inst's cmod is NZ, we can always remove
scan_inst: NZ is invariant for false and true. This
holds even if src0 is NaN: .nz is the only cmod,
that returns true for NaN.
- .g is invariant if src0 has a UD type
- .l is invariant if src0 has a D type
- scan_inst and inst have the same cmod:
If scan_inst is anything than CMP, it already
wrote the appropriate value to the flag register.
- else:
We can change cmod of scan_inst to that of inst,
and remove inst. It is valid as long as we make
sure that no instruction uses the flag register
between scan_inst and inst.
Nine new cmod_propagation unit tests:
- cmp_cmpnz
- cmp_cmpg
- plnnz_cmpnz
- plnnz_cmpz (*)
- plnnz_sel_cmpz
- cmp_cmpg_D
- cmp_cmpg_UD (*)
- cmp_cmpl_D (*)
- cmp_cmpl_UD
(*) this would fail without changes to brw_fs_cmod_propagation.
This fixes optimisation that used to be illegal (see issue #2154)
= Before =
0: linterp.z.f0.0(8) vgrf0:F, g2:F, attr0<0>:F
1: cmp.nz.f0.0(8) null:F, vgrf0:F, 0f
= After =
0: linterp.z.f0.0(8) vgrf0:F, g2:F, attr0<0>:F
Now it is optimised as such (note change of cmod in line 0):
= Before =
0: linterp.z.f0.0(8) vgrf0:F, g2:F, attr0<0>:F
1: cmp.nz.f0.0(8) null:F, vgrf0:F, 0f
= After =
0: linterp.nz.f0.0(8) vgrf0:F, g2:F, attr0<0>:F
No shaderdb changes
Closes: https://gitlab.freedesktop.org/mesa/mesa/issues/2154
Signed-off-by: Yevhenii Kolesnikov <yevhenii.kolesnikov@globallogic.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3348>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3348>
We have native FMA which works for graphics usage (unlike Midgard where
it's really reserved for compute for various reasons), let's use it.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4150>
Instead of trying to reindex all the times, just be okay with consistent
but sparse indices, then figuring out the max index is easy enough.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4150>
Same purpose as the Midgard version, but the implementation is
*dramatically* simpler thanks to our more regular IR.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4150>
We can move e v e n more code to be shared and let bi_block inherit from
pan_block, which will allow us to use the shared data flow analysis.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4150>
Now that it's all abstracted nicely with an implementation shared with
Midgard, this is pretty easy to get.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4150>
Ideally we would sync the compilers to use the same indexing scheme but
that's a lot more Midgard refactoring than I have time for right now.
This is good enough honestly.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4150>
We'd like to share this big chunk of code with Bifrost but that requires
removing the compiler_context parameter... which is totally unused in
fact!
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4150>
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
It was added with tracie, but it doesn't depend on it.
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Note that tess factors are always read at the end of the shader,
so those are still always saved to LDS.
Totals from affected shaders:
VGPRS: 25244 -> 25164 (-0.32 %)
Code Size: 1768268 -> 1690804 (-4.38 %) bytes
Max Waves: 4947 -> 4953 (0.12 %)
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3964>
This optimizes out several superfluous stores of the tess factors,
especially if the shader wrote those outputs multiple times.
Pipeline DB changes on GFX10:
Totals from affected shaders:
SGPRS: 30384 -> 29536 (-2.79 %)
Code Size: 2260720 -> 2214484 (-2.05 %) bytes
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3964>
In some cases (eg. in a few tessellation CTS tests) the VS part of
a merged HS is completely empty. Let's not generate a divergent if
in these cases. (LLVM also doesn't do it.)
No pipeline DB changes, only affects the CTS.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3964>