These are functions that run before the entrypoint at least once per
draw and write their results via store_preamble, and then are loaded in
the rest of the shader via load_preamble.
We will add users in the following commits.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13148>
The workgroup_index is intended for situations when a 3 dimensional
workgroup_id is not available on the HW, but a 1 dimensional index is.
In this case, we can use lower the 3D ID to use this.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15103>
This is to match other NIR terminology.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Jason Ekstrand <jason.ekstrand@collabora.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15103>
Trivial, but will help users avoid some struct constructions that can be
awkward in C.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14865>
moved from radeonsi without the vectorization, which won't be needed for
now. We will lower IO in st/mesa instead of radeonsi to get the transform
feedback info into store instructions.
Reviewed-by: Emma Anholt <emma@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14388>
This is for drivers that have separate store instructions for varyings,
system value outputs (such as clip distances), and transform feedback.
The flags tell the driver not to store the output to those locations.
This will be used by radeonsi initially, and then maybe by a new linker.
Reviewed-by: Emma Anholt <emma@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14388>
This will allow compaction of transform feedback varyings because they
are no longer tied to varying slots with this information.
It will also make transform feedback info available to all NIR passes
after IO is lowered. It's meant to replace pipe_stream_output_info.
Other intrinsics are not used with transform feedback.
Reviewed-by: Emma Anholt <emma@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14388>
Task shader outputs work differently than other shaders, so they
need special consideration. Essentially, they have two kinds of
outputs:
1. Number of mesh shader workgroups to launch.
Will be still represented by a shader output.
2. Optional payload of up to (at least) 16K bytes.
These payload variables behave similarly to shared memory, but
the spec doesn't actually define them as shared memory (also, they
may be implemented differently by each backend), so we need to add
a new NIR variable mode for them.
These payload variables can't be represented by shader outputs
because the 16K bytes don't fit the 32x vec4 model that NIR uses
for its output variables.
This patch adds a new NIR variable mode: nir_var_mem_task_payload
and corresponding explicit I/O intrinsics, as well as support for
this new mode in nir_lower_io.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Caio Oliveira <caio.oliveira@intel.com>
Reviewed-by: Jason Ekstrand <jason.ekstrand@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14930>
I was doing some RE on freedreno and we had some questions about when the
hardware might need non-uniform or non-constant array access for various
descriptor types, so let's leave some notes for the next person.
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13621>
This patch moves the shrinking of store sources into
a separate pass.
The reasoning behind this is that this pass usually only
needs to be called once while nir_shrink_vectors might
better be called several times. This allows to move
the pass(es) out of the optimization loops.
Reviewed-by: Emma Anholt <emma@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14480>
It was introduced for nir-to-tgsi, and I found that it was the wrong
approach. There's a reason nobody else does RA this way.
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14404>
In the future we'll want to reuse this intrinsic to deal with ray
queries. Ray queries will use a different global pointer and
programmatically change the control/level arguments of the trace send
instruction.
v2: Comment on barrier after sync trace instruction (Caio)
Generalize lsc helper (Caio)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Caio Oliveira <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13719>
This pass (lowering discard_if to control flow and unconditional
discard) was originally written for Zink, but is useful for hardware
that lacks conditional discard instructions like AGX. In theory AGX
could implement a conditional discard with CSEL, but the vendor
compiler uses a lowering like this one. Since I like not writing code,
I'd like to use the pass that's already in tree.
v2: Don't preserve dominance (Jason). Assert we don't see demotes or
terminates (Jason). Add Mike's ack.
Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Acked-by: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14217>
Qualcomm doesn't natively support shuffle, but it does natively support
relative shuffles where the delta is a constant. Therefore we'll expose
emulated support for both. Add support for this emulation of
subgroupShuffle() to NIR.
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Reviewed-by: Danylo Piliaiev <dpiliaiev@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14412>
This option only applies to relative shuffles (up/down/xor), and in a
moment we're going to add an option to lower normal shuffles, so rename
it.
While we're here, rename lower_shuffle() to lower_to_shuffle() for
similar reasons.
Reviewed-by: Danylo Piliaiev <dpiliaiev@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14412>
This pass was originally written for d3d12, but is useful for hardware
that lacks sample compare support like some etnaviv GPU models.
Also rename the lowering pass and some surrounding code to
nir_lower_tex_shadow as suggested by Emma.
I'd like to use the pass that's already in tree.
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Emma Anholt <emma@anholt.net>
Reviewed-by: Jesse Natalie <jenatali@microsoft.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14308>
This lets nir-to-tgsi fold the constant offset of addressing calculations
into the CONST[] reference, which is important for D3D9-era compatibility:
HW of that age has limited uniform space, and if we do the addressing math
as math in the shader for dynamic indexing, the nir_load_consts end up
taking up uniforms we don't have available.
r300:
total instructions in shared programs: 1279699 -> 1279167 (-0.04%)
instructions in affected programs: 134796 -> 134264 (-0.39%)
total instructions in shared programs: 1279699 -> 1279167 (-0.04%)
instructions in affected programs: 134796 -> 134264 (-0.39%)
total temps in shared programs: 213912 -> 213736 (-0.08%)
temps in affected programs: 2166 -> 1990 (-8.13%)
total consts in shared programs: 953237 -> 952973 (-0.03%)
consts in affected programs: 45980 -> 45716 (-0.57%)
Acked-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14309>
This saves a lot of pointless gl.h includes across the board,
it moves the one place that needs GLenum into a separate file
only used in those passes that require it.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14605>
Doing this for ir3 required adding a struct for limits of how much base to
fold in (which NTT wants as well for its case of shared vars), otherwise
the later work to lower to the 1<<9 word limit would emit more
instructions.
The shader-db results are that sometimes the reduction in NIR instruction
count results in the fewer sampler prefetches due to the shader being
estimated to be shorter (dota2, nexuiz):
total instructions in shared programs: 8996651 -> 8996776 (<.01%)
total cat5 in shared programs: 86561 -> 86577 (0.02%)
Reviewed-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14023>
Adreno GPUs has native instruction for unsigned and mixed dot_4x8 but
not signed dot product.
Signed-off-by: Danylo Piliaiev <dpiliaiev@igalia.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Emma Anholt <emma@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13986>
Ultimately this is consumed by nir-to-tgsi and needed by virglrenderer
to correctly declare output variables.
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Emma Anholt <emma@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14423>
This envvar is initialized when creating a NIR shader, but it needs to
be used before. So initialize it here.
v2 (Juan):
- Use static variable for first initialization.
Fixes: f77ccdfb4a ("nir: add NIR_DEBUG envvar")
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14057>
On AMD, the hardware will return 0 for the raw LOD if the sum of the
absolute values of derivatives is 0 but Vulkan expects the value to
be in the [-inf, -22.0f] range.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14147>
Just remove queries that are never used or proceeded with. The latter
case leading to undefined values.
v2: Don't use nir_shader_instructions_pass() to find variables (Caio)
Simplify replacement (Caio)
v3: Don't track all the queries intrinsic effects (Caio)
Rename things to represent only read queries (Caio)
Use set instead of hash_table (Caio)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Caio Oliveira <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13718>
Move all the NIR related debug environmental variables in a single
NIR_DEBUG one.
Use NIR_DEBUG=help to print all the available options.
v2:
- Use a macro to simplify (Marcin, Jason)
- Remove wrong changes (Marcin)
v3 (Marcin):
- Remove rendundant NIR mentioning in option descriptions.
- Unwrap option descriptions.
- Ensure the constant is unsigned.
- Use extern array to remove switch.
v4:
- Add missing kernel shader (Jason).
- Add unlikely() (Marcin).
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Marcin Ślusarz <marcin.slusarz@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13840>
I aimed for "things that look like big switch statements, or cases where
the compiler is unlikely to be able to constant-propagate an argument into
something useful."
Saves another 80kb on disk. No perf difference on iris shader-db, n=23.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13916>
spirv_to_nir sometimes wraps derefs in vec2 or mov instructions as part of
its texture handling. These get in the way of
nir_rematerialize_derefs_in_use_blocks_impl. Running copy propagation
should get rid of the extra move instructions and get us back to intact
deref chains for everything except variable pointer use-cases.
fossil-db (Sienna Cichlid):
Totals from 6 (0.00% of 134572) affected shaders:
CodeSize: 92656 -> 93088 (+0.47%)
Instrs: 17060 -> 17138 (+0.46%)
Latency: 224408 -> 227539 (+1.40%)
InvThroughput: 37402 -> 37924 (+1.40%)
VClause: 408 -> 402 (-1.47%)
Copies: 1065 -> 1107 (+3.94%)
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/5668
Fixes: 14a12b771d ("spirv: Rework our handling of images and samplers")
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13924>
Add this as an option to nir_lower_compute_system_values_options
instead of just relying on the shader's options.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Caio Oliveira <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13466>
This is separate from images and samplers. It's a texture (not a
storage image) without a sampler. We also add C-visible helpers to
convert between sampler and image types.
Reviewed-by: Jesse Natalie <jenatali@microsoft.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13389>
With nir_var_image, we've now run out of bits in our packed blob for
deref instructions. We could revert to an unpacked blob or we could be
a bit more clever about how we encode deref modes and pack them into 5
bits.
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13386>