sparse binds have to be processed synchronously with cmdbuf recording to
avoid resource object desync in the vk driver, which means they have to be
done in the driver thread instead of the flush thread. this necessitates
adding locking for the queue since there is now a case when submissions occur
in a different thread
fixes illegal multithread usage in KHR-GL46.CommonBugs.CommonBug_SparseBuffersWithCopyOps
cc: mesa-stable
Reviewed-by: Dave Airlie <airlied@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13597>
vulkan requires that vertex attribute access be aligned to the size of
a component for the attribute, but GL has no such requirements
the existing alignment caps are unnecessarily restrictive for applying
this limitation, so this cap now pre-calculates the masks for elements
and vertex buffers in vbuf to enable rewriting misaligned buffers
Acked-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13556>
The single-plane descriptor emit helper doesn't strictly need the UBWC
reloc, since imageBuffer can't be UBWC, but it means the function is ready
to be used for non-buffer image descriptors later.
no-hw drawoverhead 1-imageBuffer change throughput 1.95457% +/- 1.44325%
(n=127).
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13635>
The gmem store stores both depth and stencil for z24s8. So, if we're
doing a write (clear or draw) to one or the other of the channels, we need
the other one restored as well.
Cc: mesa-stable
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13649>
Instead of checking for MESA_SHADER_COMPUTE (and KERNEL). Where
appropriate, also use gl_shader_stage_is_compute().
This allows most of the workgroup-related lowering to be applied to
Task and Mesh shaders. These will be added later and "inherit" from
cs_prog_data structure.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13629>
Enum values for MESA_SHADER_TASK and MESA_SHADER_MESH are larger than
MESA_SHADER_FRAGMENT, so can't rely on the them for ordering anymore.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13637>
We could decouple the locations in the array from the gl_shader_stage
enum values, but for now this is convenient.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13637>
The code is correct, but compiler can't see it. Initialize the value
to NULL and assert on it if the function succeeds. It both helps the
compiler and make the code slightly more robust.
```
../src/intel/vulkan/anv_queue.c: In function ‘anv_QueueSubmit2KHR’:
../src/intel/vulkan/anv_queue.c:932:16: warning: ‘impl’ may be used uninitialized in this function [-Wmaybe-uninitialized]
932 | result = anv_queue_submit_add_timeline_wait(queue, submit,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
933 | &impl->timeline,
| ~~~~~~~~~~~~~~~~
934 | value);
| ~~~~~~
../src/intel/vulkan/anv_queue.c:899:31: note: ‘impl’ was declared here
899 | struct anv_semaphore_impl *impl;
| ^~~~
```
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13638>
This could prevent error detection, if a uniform change sets
SamplersValidated to true without calling _mesa_update_shader_textures_used.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13416>
The driver should always know the attachments at this point. This
should reduce the number of L2 cache flushes for imageless framebuffers.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13291>
Fix defect reported by Coverity Scan.
Uninitialized pointer field (UNINIT_CTOR)
uninit_member: Non-static class member error is not initialized
in this constructor nor in any functions that it calls.
Fixes: 7558340ebb ("intel/compiler: Add helpers to select SIMD for compute shaders")
Signed-off-by: Vinson Lee <vlee@freedesktop.org>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13608>
brw_simd_select return type is int.
Fix defect reported by Coverity Scan.
Unsigned compared against 0 (NO_EFFECT)
unsigned_compare: This less-than-zero comparison of an unsigned value is never true. selected_simd < 0U.
Fixes: 7dda0cf2b8 ("intel/compiler: Use SIMD selection helpers for CS")
Signed-off-by: Vinson Lee <vlee@freedesktop.org>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13606>
VVL already prints its messages using configurable settings. there's no
reason for zink to unconditionally repeat them immediately after
cc: mesa-stable
Reviewed-by: Dave Airlie <airlied@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13633>
After running the (renamed) dxil_nir_split_typed_samplers pass, the
shader will have either:
* Textures, which map to D3D SRVs
* Bare samplers, which map to D3D bare samplers
* Images, which map to D3D UAVs
There shouldn't be any remaining samplers with type information
Reviewed-by: Enrico Galli <enrico.galli@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13390>
Typically, optimization passes go through all the blocks in a shader
and make adjustments on the fly, so we always want them to update
the current block or the current block pointer will become outdated.
Also, we don't need to keep track of the previous current block
pointer to restore it, since optimization passes run after we have
completed conversion to VIR, and therefore, anything that comes after
that should always set the current block before emitting code.
Fixes debug assert crashes when running shader-db:
vir.c:1888: try_opt_ldunif: Assertion `found || &c->cur_block->instructions == c->cursor.link' failed
Reviewed-by: Juan A. Suarez <jasuarez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13625>
Collabora has added 7 new lazor Chromebooks which have Adreno 618 GPUs.
Run half of the test suite (plus variants) in pre-merge.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Emma Anholt <emma@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13441>
So far only LAVA jobs make use of it, but I guess baremetal could be
extended to have these timeouts as well.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Emma Anholt <emma@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13441>
In the menu of CS:GO R8_SRGB textures are uploaded and read back, and
since R8_SRGB can't be read back on GLES, because it is not a rendertarget
format and glGetTexImage and siblings don't exists, we can't default to
enabling reading back this format. This leads to an emulation of the
glGetTexImage calls issued by CS:GO, and this slows down the menus a lot
(below 1 fps on Intel XE hosts).
So add this driconf tweak and enable it for CS:GO to work around the issue.
It can be done safely, because in this case we actually can use the data
that is stored on the host in the backing IOV.
This tweak lets the CS:GO menu run at around 60 FPS when run with virgl
on a Intel XE host when it would run with less than 1 FPS without the tweak.
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: John Bates <jbates@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13572>
This shouldn't fix any real world bugs, except it will now clear more
stale syncobjs than it was previously doing, and actually do what the
comment says it does.
I could not find a real workload where this change would be relevant,
although I didn't try too much. I wrote my own little egl program to
test this.
I spotted this while reading the code when investigating a Piglit
failure [0]. It turns out this part the code was not relvant for the
failure.
[0]: ext_external_objects-vk-image-display-overwrite
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13536>
One CTS test is still failing and the fix isn't upstream yet.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13623>
Because we aren't running this test on pre-merge, the expectations have
gone out of sync with the code. Sync them again.
Signed-off-by: Guilherme Gallo <guilherme.gallo@collabora.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13089>
It seems that the cpufreq support in a530 is not rock solid yet, as the
device intermittently reboots during the boot process.
Passing `maxcpus=2` to the kernel avoids this issue.
Signed-off-by: Guilherme Gallo <guilherme.gallo@collabora.com>
Acked-by: Emma Anholt <emma@anholt.net>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13089>
These are manual jobs, so the expected results got out of date.
Signed-off-by: Guilherme Gallo <guilherme.gallo@collabora.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13089>
* Update Kconfig for x86_64 and ARM64. Follow the dependency tree of the
kernel modules to make sure that the intended configurations are being
set. Check scripts/merge_config.sh output as well to see if there is
a requested Kconfig not being considered.
For a630 devices:
* Use kernel version with a6xx workaround for frequency scaling
* Enable CONFIG_QCOM_LMH targeting a630 slowness on new kernel
---- Out of tree patches used ----
For a360 device:
* Revert a commit which remove slpi_region from msm8996:
8b0031f8bda2 ("Revert "arm64: msm8996: fix memory region overlap"")
Signed-off-by: Guilherme Gallo <guilherme.gallo@collabora.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13089>
To allow using non-constant sampler array index. This prevent
Mari render fail for any scene.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13304>
For matching executable with variable names like Mari which
append version string to its executable like: Mari4.5v2, Mari4.7v4.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13304>
Fix defect reported by Coverity Scan.
Evaluation order violation (EVALUATION_ORDER)
write_write_typo: In unsized = unsized =
glsl_array_type(glsl_uintN_t_type(bit_size), 0U, bit_size / 8U),
unsized is written twice with the same value.
Fixes: f79a25653b ("zink: move all shader bo/sharedmem access to compiler passes")
Signed-off-by: Vinson Lee <vlee@freedesktop.org>
Reviewed-By: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13607>
Emma Anholt
Mike Blumenkrantz
Caio Oliveira
Vadym Shovkoplias
Danylo Piliaiev
Iago Toral Quiroga
Pierre-Eric Pelloux-Prayer
Samuel Pitoiset
Vinson Lee
Jesse Natalie
Rhys Perry
Tomeu Vizoso
Gert Wollny
Paulo Zanoni
Ella Stanforth
Guilherme Gallo
Qiang Yu