this can be used by drivers which support the extension to indicate support
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
We need to subtract the starting offset from the final offset before
dividing by the stride. See src/intel/vulkan/genX_cmd_buffer.c:3142.
Not known to fix anything.
This operation decorate with an Id instead of a Literal or String.
It is used by HlslCounterBufferGOOGLE (provided by
SPV_GOOGLE_hlsl_functionality1). Even if we don't do anything with
that decoration, we must be able to parse SPIR-V that uses it.
Fixes: 891886da2f "spirv: Add no-op support for VK_GOOGLE_hlsl_functionality1"
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Decorations (and ExecutionModes) can have not only literals, but also
Ids associated with them. So rename the field to the more general
name "Operand" used by the spec.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Doesn't fix anything but it's not the right function prototype.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: 673f33c77d ("anv: Implement CmdBegin/EndQueryIndexed")
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Sagar Ghuge <sagar.ghuge@intel.com>
Several empty cmdbufs are submitted by app/xserver per frame, from
glamor_block_handler for example. Let's skip them.
Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
This has been unused since r600 stopped using it in 2010.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Reviewed-by: Kristian Høgsberg <hoegsberg@gmail.com>
This one would allocate from two underlying pools, but has never been
used.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Reviewed-by: Kristian Høgsberg <hoegsberg@gmail.com>
I couldn't find any uses in the tree since its introduction.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Reviewed-by: Kristian Høgsberg <hoegsberg@gmail.com>
Noticed while trying to decide if pipebuffer was of any use to me, and
found that nothing has used it in the last 10 years at least.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Reviewed-by: Kristian Høgsberg <hoegsberg@gmail.com>
Set REG_A2XX_RB_COPY_DEST_OFFSET in the tile init as it won't get touched
by the draw batch. Then gmem2mem is the same for all tiles.
Similar to what is done in a6xx, but only for gmem2mem.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Allows removing the load_deref/store_deref code in the compiler.
tgsi_to_nir now uses screen instead of options so we can simplify that too.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Rob Clark <robdclark@gmail.com>
a2xx driver is currently broken when PIPE_CAP_PACKED_UNIFORMS is enabled,
disable it for now.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
tgsi_to_nir now requires a screen pointer and is used by fd2_prog_init.
fd2_prog_init is used before fd_context_init so set the pointer manually.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
so that bound compute shader resources won't be added when they are not
needed and same for graphics.
Acked-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
The assertion considers max_dw from the current IB in the chain, but
big_ib_buffer is a buffer for the next IB, which can be smaller.
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
Acked-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Applications frequently call glBufferSubData() to consecutive regions
of a VBO to append new vertex data. If no data exists there yet, we
can promote these to unsynchronized writes, even if the buffer is busy,
since the GPU can't be doing anything useful with undefined content.
This can avoid a bunch of unnecessary blitting on the GPU.
u_threaded_context would do this for us, and in fact prohibits us from
doing so (see TC_TRANSFER_MAP_NO_INFER_UNSYNCHRONIZED). But we haven't
hooked that up yet, and it may be useful to disable u_threaded_context
when debugging...at which point we'd still want this optimization. At
the very least, it would let us measure the benefit of threading
independently from this optimization. And it's not a lot of code.
Removes most stall avoidance blits in "Total War: WARHAMMER."
On my Skylake GT4e at 1920x1080, this appears to improve performance
in games by the following (but I did not do many runs for proper
statistics gathering):
----------------------------------------------
| DiRT Rally | +2% (avg) | + 2% (max) |
| Bioshock Infinite | +3% (avg) | + 9% (max) |
| Shadow of Mordor | +7% (avg) | +20% (max) |
----------------------------------------------
This implements PIPE_CAP_INVALIDATE_BUFFER and invalidate_resource(),
as well as the PIPE_TRANSFER_DISCARD_WHOLE_RESOURCE flag. When either
of these happen, we swap out the backing storage of the buffer for a
new idle BO, allowing us to write to it immediately without stalling
or queueing a blit.
On my Skylake GT4e at 1920x1080, this improves performance in games:
-----------------------------------------------
| DiRT Rally | +25% (avg) | +17% (max) |
| Bioshock Infinite | +22% (avg) | +11% (max) |
| Shadow of Mordor | +27% (avg) | +83% (max) |
-----------------------------------------------
This is probably not the best place for it, but I don't feel like moving
the one out of the TGSI translator today, and we already have the other
direction here, so...*shrug*
This unifies a bunch of the UBO and SSBO code to use common structures.
Beyond iris_state_ref, pipe_shader_buffer also gives us a buffer size,
which can be useful when filling out the surface state.
I have various conditions in place to try and avoid unnecessary
PIPE_CONTROL flushes, especially to batches which may have never
used the buffer being mapped. But if we do a CPU map to a bound
constant buffer, we still need to mark push constants dirty, even
if there's nothing happening in batches that would warrant a flush.
Fixes obvious misrendering in the "XCOM 2: War of the Chosen" menus
(lots of rainbow colored triangles). Fixes lots of blinking elements
in "Shadow of Mordor". Fixes missing crowd rendering in "DiRT Rally".
The issue is noticeable in the
dEQP-GLES31.functional.geometry_shading.layered.render_with_default_layer_3d
test where a triangle goes missing when we use the maximum number of
URB entries as specified by the documentation.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107505
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Acked-by: Kenneth Graunke <kenneth@whitecape.org>
Allow ATTR and IMM sources unconditionally (ATTR are just GRFs, IMM will
be handled by opt_combine_constants(). Both are already allowed by
opt_copy_propagation().
Also allow FIXED_GRF if the regioning is 8,8,1. Could also allow other
stride=1 regions (e.g., 4,4,1) and scalar regions but I don't think
those occur. This is sufficient to allow a pass added in a future commit
(fs_visitor::lower_linterp) to avoid emitting extra MOV instructions.
I removed the 'src.stride > 1' case because it seems wrong: 3-src
instructions on Gen6-9 are align16-only and can only do stride=1 or
stride=0. A run through Jenkins with an assert(src.stride <= 1) never
triggers, so it seems that it was dead code.
Reviewed-by: Rafael Antognolli <rafael.antognolli@intel.com>
The two new unit tests verify that propagating a saturate between
instructions of different exec sizes does not happen.
Reviewed-by: Rafael Antognolli <rafael.antognolli@intel.com>
Will allow us to test that propagation between instructions of different
exec sizes does not happen (in the next commit).
The stray-looking change in intervening_dest_write is to adjust the size
of the texture result to keep the test functioning identically when the
instructions' exec sizes are doubled. Without the change, the texture
does not overwrite the destination fully as the unit test intends.
Reviewed-by: Rafael Antognolli <rafael.antognolli@intel.com>
We now have a lowering pass that will do this at the fs_visitor level,
so we can remove this code from gen11+.
v2: Reduce size of the "i" array from 4 to 2 (Matt).
Reviewed-by: Matt Turner <mattst88@gmail.com>
On gen11, instead of using a PLN instruction, we convert
FS_OPCODE_LINTERP to 2 or 4 multiply adds. That is done in the
fs_generator code.
This patch adds a lowering pass that does the same thing at the
fs_visitor. It also drops the usage of NF types, since we don't need the
extra precision and it lets us skip the accumulator. With all that, some
optimizations will still be run on the generated code, and we should get
better scheduling.
v2: Update comment about saturation and conditional mod (Matt)
Reviewed-by: Matt Turner <mattst88@gmail.com>
Mike Blumenkrantz
Kenneth Graunke
Caio Marcelo de Oliveira Filho
Lionel Landwerlin
Chia-I Wu
Eric Anholt
Jonathan Marek
Marek Olšák
Matt Turner
Rafael Antognolli