The copySubBuffer functionality always attempted a server side blit from
back to fake front if a fake front was present, and we weren't displaying
on a remote GPU.
Now that we always have local blit capability on modern drivers, first
attempt a local blit, and only if that fails, try the server blit.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Axel Davy <axel.davy@normalesup.org>
With GLX_SWAP_COPY_OML and GLX_SWAP_EXCHANGE_OML it may happen in situations
when glXSwapBuffers() is immediately followed by for example another
glXSwapBuffers() or glXCopyBuffers() or back buffer age querying, that we
haven't yet allocated and initialized a new back buffer because there was
no GL rendering in between.
Make sure that we have a back buffer in those situations.
v2: Eliminate the drawable have_back_format member.
v3: Make sure we re-initialize the back even if it exists.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Add support for the exchange swap method. Since we're now forcing a fake front
buffer and we exchange the back and fake front on swaps, we don't need to add
much code.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Eliminate the back-to-fake-front copy by exchanging the previous back buffer
and the fake front buffer. This is a gain except when we need to preserve
the back buffer content but in that case we still typically gain by replacing
a server-side blit by a client side non-flushing blit.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
It's not used anywhere and now that we're about to exchange back- and
fake fronts it doesn't serve a purpose.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Support the GLX_SWAP_COPY_OML method. When this method is requested, we use
the same swapbuffer code path as EGL_BUFFER_PRESERVED.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
EGL uses the force_copy parameter to loader_dri3_swap_buffers_msc() to indicate
that it wants to preserve back buffer contents across a buffer swap.
While the loader then turns off server-side page-flipping there's nothing to
guarantee that a new backbuffer isn't chosen when EGL starts to render again,
and that buffer's content is of course undefined.
So rework the functionality:
If the client supports local blits, allow server-side page flipping and when
a new back is grabbed, if needed, blit the old back's content to the new back.
If the client doesn't support local blits, disallow server-side page-flipping
to avoid a client deadlock and then, when grabbing a new back buffer, sleep
until the old back is idle, which may take a substantial time depending on
swap interval.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
The code was relying on us always having a current context for client local
image blit operations. Otherwise the blit would be skipped. However,
glxSwapBuffers, for example, doesn't require a current context and that was a
common problem in the dri1 era. It seems the problem has resurfaced with dri3.
If we don't have a current context when we want to blit, try creating a private
dri context and maintain a context cache of a single context.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
It's not very usable since in the rare, but definitely existing case that
we don't have a current context, it will return NULL.
Presumably it will always be safe to use the dri screen the drawable was
created with for operations on that drawable.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Having two callbacks to manage a single int seems like an overkill.
Use a cached copy and update that when needed.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
---
Might want to look if the dimensions dance in .query_surface ...
speaking of which close to nobody implements that ...
Currently xmlconfig is conditionally used, only when --enable-dri is
available.
As the library has moved to src/util and has wider wisebase, this guard
is no longer correct. Strictly speaking - it wasn't since the
introduction of xmlconfig into st/nine a while ago.
Unconditionally enable xmlconfig and drop the linking. As said before
there's other users of the library, so depending on the configure
options we will get multiple definitions of said symbols.
NOTE: To avoid breaking other combinations, this commit adds the
xmlconfig link to the required places - throughout gallium and the DRI
loaders.
Cc: Aaron Watry <awatry@gmail.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
This implements a wait for glXWaitGL, glXCopySubBuffer, dri flush_front and
creation of fake front until all pending SwapBuffers have been committed to
hardware. Among other things this fixes piglit glx-copy-sub-buffers on dri3.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Cc: <mesa-stable@lists.freedesktop.org>
As of last commit, no invalid swap interval can be stored, so there's
no need to sanitize the values when reading them anymore.
Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
If the application hasn't done any drawing since the last call, we
would reuse the same back buffer which was used for the previous swap,
which may not have completed yet. This could result in various issues
such as tearing or application hangs.
In the normal case, the behaviour is unchanged.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97957
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101683
Cc: mesa-stable@lists.freedesktop.org
[Michel Dänzer: Make Thomas' fix from bugzilla actually work as
intended, write commit log]
Same as the previous commit, but this one was split out because it's
a bit more complicated: this field is given as a pointer to a function,
so the function had to be changed as well, and the function was use in
a bunch of places, which needed updating as well.
Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Pretty much every other place does the same.
Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
By this allows us to fetch the device list/info w/o the revision field.
At the moment retrieving the latter wakes up the device.
Note: kernel patch to resolve that should be in 4.10.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Tested-by: Mike Lothian <mike@fireburn.co.uk>
Currently when running mesa on imx6 the following loader warnings
are seen:
# kmscube -D /dev/dri/card1
MESA-LOADER: device is not located on the PCI bus
MESA-LOADER: device is not located on the PCI bus
MESA-LOADER: device is not located on the PCI bus
Using display 0x1920948 with EGL version 1.4
As this is not an error message, change it to debug level in
order to have a cleaner log output.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
This is a DRI3 version of a change made for DRI2
(4d6d4f939e, "egl/dri2: implement query surface hook"),
that fixed failures in dEQP-EGL.functional.resize.surface_size.grow
and dEQP-EGL.functional.resize.surface_size.shrink.
Cc: Tapani Pälli <tapani.palli@intel.com>
Cc: Mark Janes <mark.a.janes@intel.com>
Cc: Chad Versace <chadversary@chromium.org>
Signed-off-by: Brendan King <Brendan.King@imgtec.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Cc: "17.0" <mesa-stable@lists.freedesktop.org>
Otherwise we would fail with "implicit declaration of function" geteuid
and getenv respectively.
To trigger (re)move the libdrm.pc file and use the following:
$ ./autogen.sh --disable-egl --disable-gbm --disable-dri \
--with-dri-drivers=swrast --with-gallium-drivers=swrast
$ make
Cc: Vinson Lee <vlee@freedesktop.org>
Fixes: 3f462050c ("loader: Add an environment variable to override driver name choice.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99701
v2: [Emil: handle stdlib.h add commit message]
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
My vc4 simulator has been implemented so far by having an entrypoint
claiming to be i965, which was a bit gross. The simulator would be a lot
less special if we entered through the vc4 entrypoint like normal, so add
a loader environment variable to allow the i965 fd to probe as vc4.
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
This makes it possible to 'use' the imx-drm driver. Remeber that it
is not possible to have sysmbol names in C/C++ with a '-' in it.
Changes since v1:
- move the fix to loader.c
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com> (v1)
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Changes since v1:
- renamed function to loader_get_extensions_name
- moved function into loader
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
V2: [Emil Velikov]
- Use local define.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
With previous patches nearly all the original code (as seen in the
various loaders) is gone.
Update the copyright/license section to reflect that.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Axel Davy <axel.davy@ens.fr>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reminiscent from the pre-loader days, were we had multiple instances of
the loader logic in separate places and one could build a "GALLIUM_ONLY"
version.
Since that is no longer the case and the loaders (glx/egl/gbm) do not
(and should not) require to know any classic/gallium specific we can
drop the argument and the related code.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Axel Davy <axel.davy@ens.fr>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Effectively everyone with actual hardware and/or requesting the
"device_name" requires a working libdrm. Thus they could/should already
be using the (now only) codepath.
Apart from the code simplification, we can slim down our configure.ac
even further. But that will be done in separate patch(es).
Cc: Gary Wong <gtw@gnu.org>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Axel Davy <axel.davy@ens.fr>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
As of last commit nothing in mesa depends on libudev.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Axel Davy <axel.davy@ens.fr>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
With this all the libudev related code is now gone.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Axel Davy <axel.davy@ens.fr>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Currently not everyone has libudev and with follow-up patches we'll
completely remove the divergent codepaths.
Use the libdrm drm device API to construct the required ID_PATH_TAG-like
string, to preserve the current functionality for libudev users and
allow others to benefit from it as well.
v2: Drop ranty comments, pick the correct device
v3: \n -> \0 in PCI_ID_PATH_TAG_LENGTH comment (Axel).
v4: Use snprintf (Nicolai)
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Axel Davy <axel.davy@ens.fr>
Improves readability and allows us to do further cleanups a lot easier.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Axel Davy <axel.davy@ens.fr>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Currently mesa has three code paths in the loader - libudev, manual
sysfs and drm ioctl one.
Considering the issues we had with libudev - strip those down in favour
of the libdrm drm device API. The latter can be implemented in any way
depending on the platform and can be reused by others.
v2: Use correct message on drmGetDevice failure. (Nicolai)
Cc: Jonathan Gray <jsg@jsg.id.au>
Cc: Jean-Sébastien Pédron <dumbbell@FreeBSD.org>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Axel Davy <axel.davy@ens.fr>
This tries to mirrors the codepath taken by DRI2 in IntelSetTexBuffer2()
and fixes many applications when using DRI3:
- Totem with libva on hw-accelerated decoding
- obs-studio, using Window Capture (Xcomposite) as a Source
- gstreamer with VAAPI
v2:
- introduce get_dri_screen() in the dri3 loader's vtable (krh)
Tested-by: Timo Aaltonen <tjaalton@ubuntu.com>
Tested-by: Ionut Biru <biru.ionut@gmail.com>
Cc: mesa-stable@lists.freedesktop.org
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=71759
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Martin Peres <martin.peres@linux.intel.com>
This allows querying the current active screen from the
loader's common code.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Martin Peres <martin.peres@linux.intel.com>
This can make a significant difference for performance with some extreme
test cases such as vblank_mode=0 glxgears.
Fixes: 1e3218bc5b ("loader/dri3: Overhaul dri3_update_num_back")
Cc: "12.0 11.2" <mesa-stable@lists.freedesktop.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97549
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
When trying to get a device name for an fd using sysfs, it would always fail
as it was expecting key/value pairs to be delimited by '\0', which is not the
case.
Signed-off-by: Frank Binns <frank.binns@imgtec.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
NV34 and possibly other NV3x hardware has the capability of exposing the
NV25 graph class. This allows forcing nouveau_vieux to be used instead
of the gallium driver, primarily for testing purposes. (Among other
things, NV2x only ever came as AGP or inside an Xbox, never PCI/PCIe).
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Always use 3 buffers when flipping. With only 2 buffers, we have to wait
for a flip to complete (which takes non-0 time even with asynchronous
flips) before we can start working on the next frame. We were previously
only using 2 buffers for flipping if the X server supports asynchronous
flips, even when we're not using asynchronous flips. This could result
in bad performance (the referenced bug report is an extreme case, where
the inter-frame stalls were preventing the GPU from reaching its maximum
clocks).
I couldn't measure any performance boost using 4 buffers with flipping.
Performance actually seemed to go down slightly, but that might have
been just noise.
Without flipping, a single back buffer is enough for swap interval 0,
but we need to use 2 back buffers when the swap interval is non-0,
otherwise we have to wait for the swap interval to pass before we can
start working on the next frame. This condition was previously reversed.
Cc: "12.0 11.2" <mesa-stable@lists.freedesktop.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97260
Reviewed-by: Frank Binns <frank.binns@imgtec.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Without this, the X server may accumulate stale Present event contexts
if a client ends up creating and destroying DRI drawables for the same
window.
v2: Based on Chris Wilson's review:
* Use xcb_present_select_input_checked so that protocol errors
generated by old X servers can be handled gracefully
* Use xcb_discard_reply() instead of free(xcb_request_check())
Fix warnings like these due to HAVE_LIBDRM being inconsistently defined:
external/libdrm/include/drm/drm.h:839:30: warning: redefinition of typedef 'drm_clip_rect_t' is a C11 feature [-Wtypedef-redefinition]
typedef struct drm_clip_rect drm_clip_rect_t;
HAVE_LIBDRM needs to be set project wide to fix this. This change also
harmlessly links libdrm with everything, but simplifies the makefiles a
bit.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
Use dev_node_from_fd() with HAVE_LIBDRM to provide an implmentation
of loader_get_device_name_for_fd() for non-linux systems that
use libdrm but don't have udev or sysfs.
Signed-off-by: Jonathan Gray <jsg@jsg.id.au>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
It seems that due to the conditional autotools is getting confused and
forgetting to add AM_CPPFLAGS when building libloader (when
HAVE_DRICOMMON is not set).
Cc: mesa-stable@lists.freedesktop.org
Fixes: 5a79e0a8e3 "automake: loader: rework the CPPFLAGS"
Reported-by: Pali Rohár <pali.rohar@gmail.com>
Tested-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Seems that creating an empty one does not fair too well with MacOSX's
ar. Considering that all the users of the helper include it only when
needed, let's reshuffle the makefile.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92985
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Tested-by: Vinson Lee <vlee@freedesktop.org>
Tested-by: Kai Wasserbäch <kai@dev.carbon-project.org>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Without this the compilation will fail, as the headers are installed in
a non-default location.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Tested-by: Kai Wasserbäch <kai@dev.carbon-project.org>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Rather than duplicating things, just use the generic AM_CPPFLAGS. This
has the fortunate side-effect of adding VISIBILITY_CFLAGS for the dri3
helper. The latter of which was erroneously exposing some internal
symbols.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reported-by: Kai Wasserbäch <kai@dev.carbon-project.org>
Tested-by: Kai Wasserbäch <kai@dev.carbon-project.org>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Used to support EGL_KHR_image_pixmap.
Signed-off-by: Boyan Ding <boyan.j.ding@gmail.com>
Reviewed-by: Martin Peres <martin.peres@linux.intel.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Emil Velikov <emil.velikov@collabora.co.uk>
v2: From Martin Peres
- Try to fit in the 80-col limit as much as possible
v3: From Martin Peres
- introduce loader_dri3_helper.la to avoid dragging the xcb dep everywhere (Kristian & Emil)
- get rid of the width, height, dri_screen and is_different_gpu vfuncs (Kristian)
- replace the create/destroy functions with init/fini for dri3 drawables
- prefix static functions with dri3_ and exported ones with loader_dri3 (Emil)
- keep the function definition consistent (Emil)
Signed-off-by: Boyan Ding <boyan.j.ding@gmail.com>
Signed-off-by: Martin Peres <martin.peres@linux.intel.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Emil Velikov <emil.velikov@collabora.co.uk>
Double negatives in English language are normally avoided, plus the
former seems cleaner and more consistent.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Since there was an ABI break and linking twice against libudev.so.0 and
libudev.so.1 causes the application to quickly crash, we first check if
the application is currently linked against libudev before dlopening a
local handle. However for backwards/forwards compatability, we need to
inspect the application for current linkage against all known versions
first. Not doing so causes a crash when both libraries are present and
so mesa chooses libudev.so.1 but the application was linked against
libudev.so.0.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Emil Velikov:
I'm ever so slightly conserned that RTLD_NOLOAD is not part of the POSIX
standard, thus it's missing on some platforms (*BSD seems ok, while
Solaris, MacOS are not).
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Cc: mesa-stable@lists.freedesktop.org
Fixes the following build issue, when building without libudev.
CCLD libGL.la
./.libs/libglx.a(dri2_glx.o): In function `dri2CreateScreen':
src/glx/dri2_glx.c:1186: undefined reference to `loader_open_device'
collect2: ld returned 1 exit status
CCLD libEGL.la
Undefined symbols for architecture x86_64:
"_loader_open_device", referenced from:
_dri2_initialize_x11_dri2 in libegl_dri2.a(platform_x11.o)
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91077
Signed-off-by: Julien Isorce <j.isorce@samsung.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
This is already our common idiom for opening files with CLOEXEC and
it's a little ugly, so let's share this one implementation.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
As we use the file from both the dri modules and loader, we end up with
multiple definition of the symbols provided in our gallium dri modules.
Additionally we compile the file twice.
Resolve both issues, effectively enabling the build on toolchains which
don't support -Wl,--allow-multiple-definition.
v2: [Emil Velikov]
- Fix the Scons/Android build.
- Resolve libgbm build issues (bring back the missing -lm)
Cc: Julien Isorce <j.isorce@samsung.com>
Cc: "10.5 10.6" <mesa-stable@lists.freedesktop.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=90310
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=90905
Acked-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
... to manage the LIBDRM*_CFLAGS. The former is the recommended approach
by the Android build system developers while the latter has been
depreciated for quite some time.
Cc: "10.4 10.5" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Required by fstat(), otherwise we'll error out due to implicit function
declaration.
Cc: "10.4 10.5" <mesa-stable@lists.freedesktop.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=89530
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reported-by: Vadim Rutkovsky <vrutkovs@redhat.com>
Tested-by: Vadim Rutkovsky <vrutkovs@redhat.com>
The main objective of this change is to enable Linux developers to use
more of C99 throughout Mesa, with confidence that the portions that need
to be built with MSVC -- and only those portions --, stay portable.
This is achieved by using the appropriate -Werror= options only on the
places they need to be used.
Unfortunately we still need MSVC 2008 on a few portions of the code
(namely llvmpipe and its dependencies). I hope to eventually eliminate
this so that we can use C99 everywhere, but there are technical/logistic
challenges (specifically, newer Windows SDKs no longer bundle MSVC,
instead require a full installation of Visual Studio, and that has
hindered adoption of newer MSVC versions on our build processes.)
Thankfully we have more directy control over our OpenGL driver, which is
why we're now able to migrate to MSVC 2013 for most of the tree.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This reverts commit 79daa510c7.
I apparently hadn't done a clean build when testing this; it broke the
build for Tom, Ben, and myself. We like the idea; let's try a v2.
The main objective of this change is to enable Linux developers to use
more of C99 throughout Mesa, with confidence that the portions that need
to be built with MSVC -- and only those portions --, stay portable.
This is achieved by using the appropriate -Werror= options only on the
places they need to be used.
Unfortunately we still need MSVC 2008 on a few portions of the code
(namely llvmpipe and its dependencies). I hope to eventually eliminate
this so that we can use C99 everywhere, but there are technical/logistic
challenges (specifically, newer Windows SDKs no longer bundle MSVC,
instead require a full installation of Visual Studio, and that has
hindered adoption of newer MSVC versions on our build processes.)
Thankfully we have more directy control over our OpenGL driver, which is
why we're now able to migrate to MSVC 2013 for most of the tree.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
If there is no pci-id, which is valid for vc4 and freedreno, just emit
an info msg. Keep malformed but existing pci-id's as a warning.
Mostly just to clean up a warning that confuses users for the non-pci
devices.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Will make it easier on us as CleanSpec.mk comes along and improves
consistency across the Android build.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
This gathers macros that have been included across components into util so
that the include chain can be more vertical. In particular, this makes
util stand on its own without any dependence whatsoever on the rest of
mesa.
Signed-off-by: "Jason Ekstrand" <jason.ekstrand@intel.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
We want to have the dri common files compiled to define USE_DRICONF.
We need to check both NEED_OPENGL_COMMON and HAVE_DRICOMMON
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Tested-by: Brian Paul <brianp@vmware.com>
DRI_PRIME is not very handy, because you have to launch the executable
with it set, which is not always easy to do.
By using drirc, the user specifies the target executable
and the device to use. After that the program will be launched everytime
on the target device.
For example if .drirc contains:
<driconf>
<device driver="loader">
<application name="Glmark2" executable="glmark2">
<option name="device_id" value="pci-0000_01_00_0" />
</application>
</device>
</driconf>
Then glmark2 will use if possible the render-node of
ID_PATH_TAG pci-0000_01_00_0.
v2: Fix compilation issue
v3: Add "-lm" and rebase.
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
v2: Fix the leak of device_name
v3: Rebased
It enables to use the DRI_PRIME env var to specify
which gpu to use.
Two syntax are supported:
If DRI_PRIME is 1 it means: take any other gpu than the default one.
If DRI_PRIME is the ID_PATH_TAG of a device: choose this device if
possible.
The ID_PATH_TAG is a tag filled by udev.
You can check it with 'udevadm info' on the device node.
For example it can be "pci-0000_01_00_0".
Render-nodes need to be enabled to choose another gpu,
and they need to have the ID_PATH_TAG advertised.
It is possible for not very recent udev that the tag
is not advertised for render-nodes, then
ones need to add a file containing:
SUBSYSTEM=="drm", IMPORT{builtin}="path_id"
in /etc/udev/rules.d/
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Introduce a simple PCI identification method of looking up the answer
the /sys filesystem (available on Linux). Attempted after libudev, but
before DRM.
Disabled by default (available only when the --enable-sysfs configure
option is specified).
Signed-off-by: Gary Wong <gtw@gnu.org>
Acked-by: Emil Velikov <emil.l.velikov@gmail.com>
loader_get_pci_id_for_fd() and loader_get_device_name_for_fd() now attempt
all available strategies to identify the hardware, instead of conditionally
compiling in a single test. The existing libudev and DRM approaches have
been retained, attempting first libudev (if available) and then DRM (if
necessary).
Signed-off-by: Gary Wong <gtw@gnu.org>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Platforms that lack libudev (OpenBSD and possibly others) need
this change in order to load the correct dri driver.
Under linux we unconditionally require libudev, thus this code
will never get build.
v2: Add commit message (Emil Velikov)
Signed-off-by: Jonathan Gray <jsg@jsg.id.au>
Cc: "10.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
There are a lot of different pci ids supported by nouveau, and more are
added all the time. The relevant distinguisher between drivers is the
chipset id.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Cc: "10.1" <mesa-stable@lists.freedesktop.org>
As far as I know, this should be safe. If not, we have to decide whether
to have variable lookup of the functions, or just drop support for .so.0
(which is a year and a half old it looks like)
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=74127
Reviewed-by: Matt Turner <mattst88@gmail.com>
Spamming the pci id is not beneficial. Make sure it's printed
only when needed.
v2: Change severity to _LOADER_DEBUG, rather than removing
the message.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Lower values are used for more severe cases.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The code depending on the definitions is already wrapped
in the same conditional so go ahead and wrap the include.
Otherwise we'll brake compilation on platforms that are
missing the header. Add assert.h in there as well, as it
is introduced and used in the same fashon.
Cc: Eric Anholt <eric@anholt.net>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=74122
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Cover both loader and glx/dri_glx
Drop \n from the default loader logger
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Steam links against libudev.so.0, while we're linking against
libudev.so.1. The result is that the symbol names (which are the same in
the two libraries) end up conflicting, and some of the usage of .so.1
calls the .so.0 bits, which have different internal structures, and
segfaults happen.
By using a dlopen() with RTLD_LOCAL, we can explicitly look for the
symbols we want, while they get the symbols they want.
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Tested-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Tested-by: Mike Lothian <mike@fireburn.co.uk>
Currently the MSVC build is broken because of conflicting definitions of
'log' function. I didn't investigate thoroughly, but I suspect the
it is conflicting standard math.h's log.
log_ is admittedly not a great name, but it is better than a broken build.
A better one can be used in a follow-on build.
Mesa provides the flexibility of building without the
need to have libdrm present on the system. The situation
has regressed with the recent commit
commit 8c2e7fd846
Author: Emil Velikov <emil.l.velikov@gmail.com>
Date: Fri Jan 10 23:36:16 2014 +0000
loader: introduce the loader util lib
By isolating libdrm code by #ifndef __NOT_HAVE_DRM_H we
can have libdrm-less builds on across all build systems.
This patch converts Android's _EGL_NO_DRM to __NOT_HAVE_DRM_H
to provide consistency with the other cases within mesa, allows
compilation of libloader on libdrm-less scons and conditionally
links against libdrm if present under automake.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=73776
BUgzilla: https://bugs.freedesktop.org/show_bug.cgi?id=73777
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Use the kernel driver name are returned by drmGetVersion() for
non-pci(platform) devices.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
v2 (Emil): Rebased and weaked commit message.
Reviewed-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
As per original approach by Rob, each user of the loader lib should include
loader.h and the pci_id_driver_map.h header will be used exclusively by the
loader.
Add back the include guard __IS_LOADER and remove no longer needed include
folder in the scons build.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
All the various window system integration layers duplicate roughly the
same code for figuring out device and driver name, pci-id's, etc. Which
is sad. So extract it out into a loader util lib.
v2 (Emil)
* Separate the introduction of libloader from the code de-duplication.
* Strip out non-pci devices support.
* Add scons + Android build system support.
* Add VISIBILITY_CFLAGS to avoid exporting the loader funcs.
v3 (Emil)
* PIPE_OS_ANDROID is undefined at this scope, use ANDROID
* Make sure we define _EGL_NO_DRM when building only swrast
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Thomas Hellstrom
Louis-Francis Ratté-Boulianne
Emil Velikov
Eric Engestrom
Nicolai Hähnle
Eric Engestrom
Fabio Estevam
Brendan King
Eric Anholt
Boyan Ding
Christian Gmeiner
Emil Velikov
Martin Peres
Michel Dänzer
Frank Binns
Ilia Mirkin
Jan Ziak
Matt Turner
Rob Herring
Jonathan Gray
Axel Davy
Emil Velikov
Guillaume Desmottes
Chris Wilson
Julien Isorce
Derek Foreman
Erik Faye-Lund
Chih-Wei Huang
Alexander von Gluck IV
Zoë Blade
Jose Fonseca
Kenneth Graunke
Rob Clark
Michael Forney
Juha-Pekka Heikkila
Dave Airlie
Jason Ekstrand
Gary Wong