We cannot rely on unallocated_size on system memory for
VK_EXT_memory_budget.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: 4aecfbf0f4 ("intel/dev: Add devinfo::mem to store i915 regions information")
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17349>
We have this in Anv and it could be reused in Iris for integrated
memory system.
Rework:
* Jordan: Drop regions.valid (Lionel implemented a fallback)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17075>
With the old value, anv didn't think that the hardware supported 48-bit
addresses, and hit this assert:
assert(device->supports_48bit_addresses == !device->use_relocations);
The new value of 1ull << 48 is the one reported on my Icelake machine.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16933>
Mostly Matt Roper's kernel patch commit message:
The IDs added here are the subset reserved for 'motherboard down'
designs of DG2. We have all the necessary support upstream to enable
these now.
The remaining DG2 IDs for add-in cards will be enabled in a future
patch once some additional required functionality has fully landed.
Ref: https://patchwork.freedesktop.org/patch/msgid/20220425211251.77154-3-matthew.d.roper@intel.com
Cc: 22.1 <mesa-stable>
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16449>
This changes the intel_device_info calculation to call an additional
DRM query requesting the geometry topology from the kernel, which may
differ from the result of the current topology query on XeHP+
platforms with compute-only and 3D-only DSSes. This seems more
reliable than the current guesswork done in intel_device_info.c trying
to figure out which DSSes are available for the render CS.
Cc: 22.1 <mesa-stable>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14143>
Computations for indexing in-memory data structures for ray queries
depend on this.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: 4f9141607f ("intel: Add device info for DG2")
Acked-by: Tapani Pälli <tapani.palli@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15925>
DG2 introduces per primitive coarse pixel settings (in stages
preceding the PS shader) and also a control surface specifying the
rate at through the resulting surface.
v2: update comment (Caio)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Caio Oliveira <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13739>
i915 does not report slices accurately anymore on Gfx12.5+. Since this
is information we need to have for performance queries, we need to
rebuild it here.
v2: Remove invalid change to pixel pipes computations (Jordan)
v3: Fix index calculation (Curro)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14297>
The chipset_id should be named after i915 ioctl that's called
to get the device id. In user space this field holds pci device
id in reality. We now have a pci_device_id queried from drm
instead using the ioctl, so there is no much reason to keep
the chipset_id for the same purpose.
Signed-off-by: Jianxun Zhang <jianxun.zhang@linux.intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Rohan Garg <rohan.garg@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13936>
Having PCI bus and dev info in the base struct
'intel_device_info' enables us to utilize the info across
multiple drivers for several purposes, such as computing
device uuids in a multi-gpu system.
Signed-off-by: Jianxun Zhang <jianxun.zhang@linux.intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Rohan Garg <rohan.garg@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13936>
This field is an average computation that is not actually useful for
any of our driver code.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14510>
We're using the wrong helper to get the subslice total count.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: c24ba6cecb ("intel/dev: Handle CHV CS thread weirdness in get_device_info_from_fd")
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14492>
Note that this causes a geometry slice to be disabled if any DSS is
fused off within that slice, which may seem stricter than the BSpec
quotation implies, but testing shows that pixel pipes with any faulted
DSS don't work at all, and that using a slice with any faulted pixel
pipe leads to serious graphics corruption.
It would be better to query this geometry topology information from
the hardware instead of trying to reconstruct it here, but the kernel
interface for that is not available yet.
Reviewed-by: Caio Oliveira <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14436>
Reviewed-by: Emma Anholt <emma@anholt.net>
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
Acked-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10153>
A bit difficult to find what commit introduced the issue because of
all the renaming, but it was my bug :)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: mesa-stable
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10015>
When a device has its first slice/subslice fused off, we can't use the
number of slices/subslices to iterate the mask array.
v2: Fix spelling (Marcin)
Use size_t for iterator (Marcin)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reported-by: Matt Roper <matthew.d.roper@intel.com>
Cc: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/5601
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10015>
Rather than having 2 paths to set the slice/subslice/eu masks, reuse
the other internal functions. This simplifies finding bugs within this
code :
* If we have i915 query topology support, update_from_topology() is
called.
* If we don't have query topology support but we have getparam for
slice/subslice/EU, we generate a topology data and call
update_from_topology()
* If we have no kernel support to query any kind of topology, we
generate the values return by the kernel for slice/subslice/EU and
call update_from_masks() which in turns calls
update_from_topology()
v2: Fixup typo (Adam)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10015>
This knowledge was repeated in multiple places so move the values to
intel_device_info struct.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13014>
Jordan Justen
Lionel Landwerlin
Marcin Ślusarz
Kenneth Graunke
Francisco Jerez
Caio Oliveira
Jianxun Zhang
Jason Ekstrand
Dylan Baker