Static samplers are embedded in the root signature, so we can create
a separate descriptor set layout and descriptor set which we only
need to rebind when the root signature itself changes.
Signed-off-by: Philip Rebohle <philip.rebohle@tu-dortmund.de>
Updates the root descriptor set or push descriptor at draw time.
This fixes a potential issue with shader-based clear/copy commands
invalidating previously bound root descriptors.
Signed-off-by: Philip Rebohle <philip.rebohle@tu-dortmund.de>
Allows us to more easily refactor root signature-related code
without having to worry about root descriptors for now.
Signed-off-by: Philip Rebohle <philip.rebohle@tu-dortmund.de>
Fixes an issue where push constants can be invalidated by
shader-based clear/copy commands.
Signed-off-by: Philip Rebohle <philip.rebohle@tu-dortmund.de>
Uses one push constant range with VK_SHADER_STAGE_ALL. This
will allow us to easily add descriptor table offsets as push
constants.
Signed-off-by: Philip Rebohle <philip.rebohle@tu-dortmund.de>
The primary purpose of this function was to invalidate UAV
counters upon binding a pipeline. This is no longer an issue
and we don't have any other per-pipeline bindings, so this
function can be dropped.
Signed-off-by: Philip Rebohle <philip.rebohle@tu-dortmund.de>
This needs a major rework as the current implementation has bugs,
is hard to reason about, and very hard to maintain as we're about
to make major changes to the binding model as a whole.
Signed-off-by: Philip Rebohle <philip.rebohle@tu-dortmund.de>
Resource index is found in idx[0] in SM 5.0, but idx[1] when using SM
5.1, and register space is encoded separately. An rb_tree keeps track of
the internal resource index idx[0] and can map that to space/binding as
required when emitting SPIR-V.
For this to work, we must also make UAV counters register space aware.
In earlier implementation, UAV counter mask was assumed to correlate 1:1
with register_index, which breaks on SM 5.1.
Signed-off-by: Hans-Kristian Arntzen <post@arntzen-software.no>
Greatly reduce VA allocations we have to make and makes returned VA more
sensible, and better matches returned VAs we see on native drivers.
D3D12 usage flags for buffers seem generic enough that there is no
obvious benefit to place smaller VkBuffers on top of VkDeviceMemory.
Ideally, physical_buffer_address is used here, but this works as a good
fallback if that path is added later.
With this patch and previous VA optimization, I'm observing a 2.0-2.5%
FPS uplift on SOTTR when CPU bound.
Signed-off-by: Hans-Kristian Arntzen <post@arntzen-software.no>
ID3D12GraphicsCommandList2 and WriteBufferImmediate() are used by
Hitman 2, but implementing the function on top of an AMD extension has
no effect on game behaviour. It's commonly used to write debug info.
Signed-off-by: Conor McCarthy <cmccarthy@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
This method was missing in version 10.0.15063.0 of the SDK, but is
present in version 10.0.18362.0, without a UUID change. Presumably that
means this was simply an omission in the older header, rather than an
API change in the newer header.
Signed-off-by: Conor McCarthy <cmccarthy@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
There is no bit-compatible UINT format, so we'll use DXGI_FORMAT_R32_UINT.
Signed-off-by: Philip Rebohle <philip.rebohle@tu-dortmund.de>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Addresses the following limitations of the previous implementation:
- Only R32_{UINT,TYPELESS} were supported for buffers.
- Clearing an image UAV did not behave correctly for images with non-UINT formats.
- Due to the use of transfer operations, extra memory barriers were needed.
If necessary, this will create a temporary view with a bit-compatible
UINT format for the resource in order to perform a bit-exact clear.
Signed-off-by: Philip Rebohle <philip.rebohle@tu-dortmund.de>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Needed to support compute-based clear and copy operations.
Signed-off-by: Philip Rebohle <philip.rebohle@tu-dortmund.de>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
The additional data is needed to implement UAV clears.
Moving this out of d3d12_desc also helps make copying and
traversing descriptor arrays more CPU cache-friendly.
Signed-off-by: Philip Rebohle <philip.rebohle@tu-dortmund.de>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Shadow of the Tomb Raider does not re-bind all descriptor tables after
setting a new root signature if tessellation is enabled, which causes
some descriptors to be left undefined.
Signed-off-by: Philip Rebohle <philip.rebohle@tu-dortmund.de>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
If separate transitions of the depth and stencil plane occur in the
same array of barriers, they will be consolidated into one Vulkan
layout transition. This can only be supported for combinations of
depth read and depth write states, or identical states.
Signed-off-by: Conor McCarthy <cmccarthy@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
By setting this flag, command pools cannot efficiently pool allocations.
This flag should be set to 0 so only the VkCommandPool may be reset.
This matches D3D12 API.
Signed-off-by: Hans-Kristian Arntzen <post@arntzen-software.no>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
D3D12 command allocators are intended to recycle memory across resets,
so we should do the same thing in vkd3d.
Signed-off-by: Hans-Kristian Arntzen <post@arntzen-software.no>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
The condition in d3d12_resource_is_cpu_accessible() is going to be
changed in the following commits.
Signed-off-by: Józef Kucia <jkucia@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
The Vulkan spec says:
"Conditional rendering must also either begin and end inside the same
subpass of a render pass instance, or must both begin and end outside
of a render pass instance (i.e. contain entire render pass instances)."
Signed-off-by: Józef Kucia <jkucia@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Predicate arguments which are only non-zero in bit 32 or higher are not
supported. Predicates will not be applied to clear and copy commands because
Vulkan does not support predication of these command classes.
Signed-off-by: Conor McCarthy <cmccarthy@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
This might delay updating a d3d12_fence when a fence enqueued later than
other fences is signaled before them. On the other hand, it
significantly reduces CPU usage. I haven't found a program negatively
impacted by this change so far.
Signed-off-by: Józef Kucia <jkucia@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
We maintain separate arrays for enqueued fences and fences owned by the
fence worker thread.
Signed-off-by: Józef Kucia <jkucia@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
The debug log level is demoted to WARN after the FIXME is printed once.
Signed-off-by: Józef Kucia <jkucia@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
It isn't immediately obvious what "1u << graphics->rt_count" means.
Use dsv_attachment_mask() helper instead.
Signed-off-by: Józef Kucia <jkucia@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
We use transfer operations instead of unordered access.
Signed-off-by: Józef Kucia <jkucia@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>