One less point of differentiation.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Acked-by: Martin Peres <martin.peres@mupuf.org>
Acked-by: Emma Anholt <emma@anholt.net>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11337>
Reusing this for LAVA sounds like a good idea!
Signed-off-by: Daniel Stone <daniels@collabora.com>
Acked-by: Martin Peres <martin.peres@mupuf.org>
Acked-by: Emma Anholt <emma@anholt.net>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11337>
Whilst we want to reuse the same init and job environment for LAVA and
bare-metal, LAVA needs to additionally inject wget and tar jobs, so we
can actually get our per-job environment, as the rootfs we run in is
just the container-generated base rootfs.
Split the init script into two stages, with the first stage doing very
base bringup of devices and networking, and the second stage setting the
job environment and running the jobs.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Acked-by: Martin Peres <martin.peres@mupuf.org>
Acked-by: Emma Anholt <emma@anholt.net>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11337>
Make both LAVA and bare-metal untar into $CI_PROJECT_DIR/install/, and
symlink /install/ to it during init.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Acked-by: Martin Peres <martin.peres@mupuf.org>
Acked-by: Emma Anholt <emma@anholt.net>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11337>
Signed-off-by: Daniel Stone <daniels@collabora.com>
Acked-by: Martin Peres <martin.peres@mupuf.org>
Acked-by: Emma Anholt <emma@anholt.net>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11337>
Make sure that everything we need to ensure network access comes first,
so we can reuse this in LAVA which needs the network to pull the
per-pipeline build and the per-job environment overlays.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Acked-by: Martin Peres <martin.peres@mupuf.org>
Acked-by: Emma Anholt <emma@anholt.net>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11337>
Same as LAVA does.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Acked-by: Martin Peres <martin.peres@mupuf.org>
Acked-by: Emma Anholt <emma@anholt.net>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11337>
Play safe and make sure we don't get bit by priority rules between the
|| and | operators.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Suggested-by: Martin Peres <martin.peres@mupuf.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11337>
To try to make init more common.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Acked-by: Martin Peres <martin.peres@mupuf.org>
Acked-by: Emma Anholt <emma@anholt.net>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11337>
The screensaver kicks in at 10 minutes and obscures the screen,
independent of dpms. This causes piglit tests to get flaky (swaps start
taking a whole second, and swapbuffersmsc-divisor-zero times out at
exactly the wrong time) and slow if the run takes longer than 10 minutes.
Hopefully with this we'll see some piglit glx flakes go away forever, it
did seem to for this test locally.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11334>
The a530s will occasionally fail to make it to the fastboot prompt,
with no other deltas between a working log and a log stalled waiting
for that line to show up.
So, add a serial timeout (like the rpi boards do for similar reasons),
and on timeout restart the run. We actually restart the whole serial
watching process, because the SerialBuffer finishes itself on timeout.
This should also help with the intermittent issue we've had where a
power cycle causes the python serial module to throw an exception.
Tested with the gitlab-disabled db820c that never makes it to the
fastboot prompt (I think it's one where we need a longer micro cable
to connect it!) and saw successful boot looping to retry.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11308>
This reverts commit eef5409df4.
I suspect this has caused a lot of the CI instability today -- some flakes
were already added, but the a630-traces job is still flaking. Revert
until a fix makes it stable.
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11024>
Use Piglit's replay profile to measure and store the time that frames
take to render in the GPU.
This job won't run automatically in regular pipelines, but will be
triggered automatically by a script for every successful pre-merge
pipeline.
This is because we want to generate performance data for every relevant
commit merged in main, but we don't want to keep a device busy during
the pre-merge run.
Signed-off-by: Antonio Caggiano <antonio.caggiano@collabora.com>
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-By: Rohan Garg <rohan.garg@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7987>
Lock CPU and GPU frequency scaling on devices so to speed up test
execution and lower the variation of frame times from performance replay
jobs.
Also disable autosuspend of the GPU device.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-By: Rohan Garg <rohan.garg@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7987>
To reduce flakes, separate out the dEQP-EGL tests that are intentionally
triggering GPU hangs. This avoids some kernel side issues with bad
handling of ringbuffer-full scenarios, causing innocent tests to flake.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10560>
Finally LAVA users will be able to see deqp XMLs on failures from the
job's artifacts browser. This replaces a couple of one-off minio uploads
in the piglit runner.
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10297>
So far we were using a telnet-based script to communicate with the PoE
Switch to turn on/off the network ports the DUTs are connected.
But this script does not seem very reliable because from time to time the
switch fails to execute the steps in the script.
As the PoE Switch we use is a smart one with support for SNMP protocol,
it would be easier to use it to handle it, which allows to turn on/off
the ports without going through the nasty telnet steps
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Reviewed-by: Jose Maria Casanova Crespo <jmcasanova@igalia.com>
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9954>
Getting piglit to fit onto our test devices was proving difficult, and we
need the ability to handle flakes, so switch to the rust piglit runner
that @pepp wrote as part of the deqp-runner repo which gives us flake
detection, sharding across boards, fractional runs, and almost half the
runtime.
It doesn't handle piglit subtests yet, but if you can't run piglit's
python on your devices because it's too bloated and unstable, this is a
way forward.
Reviewed-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9468>
So far, testing VC4 and V3D/V3DV requires the CI runners having access
to a Raspberry Pi 3/4 kernel, and the correspondent modules and
bootloader files. If a different kernel must be used, it means touching
the runners to provide them.
This commit adds the option to define an URL pointing to a (compressed)
tarball containing such files, without requiring dealing with the
runners. This link is provided through the `BM_BOOTFS` job variable.
The tarball must contain two directories in the root: a `/boot`
directory (containing the kernel, DTBs and bootloader files), and a
`/lib/modules` (or `/usr/lib/modules`) with the kernel modules.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9527>
So far we were retrying the testing (through device rebooting) if we did
not detect the boot sequence.
But found a couple of times that the serial log can also be "lost"
during the testing process. In all those times a manual retry of the job
was enough to complete the test.
Thus, let's apply the retry once automatically in this case.
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9335>
Highlight in red errors from the baremetal run, so user is more aware of
what happened.
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9335>
This allows to split a piglit job in several parallel jobs, to speed up
the execution.
Due piglit restrictions, this only works for single profiles. Otherwise
an error will be shown in the runner.
Also, a new gitlab job variable `PIGLIT_TESTS` is introduced that
contains the excluded/included tests with `-x` or `-n`. The rest of the
piglit options go to `PIGLIT_OPTIONS` (like `--timeout n`).
v2 (Andres):
- Replay profile is supported in parallel jobs.
- Bail out inmediately if parallel jobs is tried with multiple
profiles.
- Use testlist only when doing parallel jobs.
- Do not drop pass tests when filtering executed tests.
- Get rid of PIGLIT_FRACTION.
v4:
- uncommit unrelated change (Andres).
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Reviewed-by: Andres Gomez <agomez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9022>
We have to disable the GLSL unit tests because with asan it runs way too
much code under qemu and times out. Those unit tests have coverage on
x86, anyway.
I also included a vulkan run, which is disabled by default due to timeouts
that I need to sort out still. It should be a useful tool for turnip
devs, though.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9070>
We are now using pages.
v2:
- Define a helper variable for the artifacts base URL (Juan).
Signed-off-by: Andres Gomez <agomez@igalia.com>
Acked-by: Eric Anholt <eric@anholt.net> [v1]
Reviewed-by: Juan A. Suarez <jasuarez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9092>
Add OpenGL and Vulkan testing for V3D and V3DV respectively.
Add also a couple of manual piglit jobs for V3D.
v2:
- Replace custom mustpass with running fraction of tests (Eric)
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8745>
When loading Vulkan ICD file, it uses the CPU machine identifier to
load the correct one, in case multiple versions are installed.
This is fine if the machine where Mesa has been built and the machine
where the test is run are exactly the same. But this is not always the
case. As example, for armhf architecture, the machine where Mesa is
built is identified as `arm7hlf`, but the Raspberry Pi 4 is identified
as `armv7l`, so it will fail to load the ICD file, though both are
totally compatible.
This allow to define the architecture instead.
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8745>
3 commits in 0.5.0:
- 20-40s savings on many of our CI runs by dropping the clever test size
scaling code.
- Even bigger savings (especially on deqp-vk runs) by increasing maximuim
test group size (~1/4 of runtime was spawning deqp on cheza, that cost
is cut by ~75%)
- No more needing to manually set MESA_DEBUG=silent
2 commits in 0.5.1:
- Fixed automatic thread pool sizing to keep all CPUs busy (thanks for
catching that Bas!).
- Automatically size down test groups on short test lists and many CPUs,
so split the list evenly between CPUs (such as on freedreno -options
jobs).
Acked-by: Daniel Stone <daniel@fooishbar.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8787>
We were using surfaceless, which misses out on some useful coverage we'd
like to have in the GLX/EGL piglit tests, but more importantly prevented
many traces from running.
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8727>
The gitlab artifacts handling has been slow in the past as we hit
gitlab.fdo from multiple runners, and it costs fd.o egress bandwidth. Use
the local http cache against the packet.net minio to cut that downloads
cost.
Closes: #3249
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8727>
These are intermittent (~1/day), seem to be around GPU faults (so
hopefully will go away once we clean up piglit's fault errors), and are
probably also related to our vintage firmware. Until we can get new
hardware in the farm, just restart the flaked job.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8722>
The script that monitors activity in the serial assumes that something
was wrong if it does not detect activity in 60 seconds, rebooting the
device and re-trying the test again.
While this timeout is enough for most cases, in some cases it is not
enough. For instance, when executing piglit testsuite it takes quite a
few time to generate the results after the test is done.
This allow to setup a custom timeout (`BM_POE_TIMEOUT`) in the proper
jobs.
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Acked-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8702>
Replace the expect-based script to turn on/off the Raspberry Pi devices
using a python-based script.
v2:
- Fix small nitpicks (Juan)
- Limit line length (Andres)
v3:
- Bump image tags (Eric, Andres)
v4:
- Bump image tags (Eric)
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Acked-by: Andres Gomez <agomez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8362>
These bring a whole lot of new coverage to these drivers, since dEQP is
bad at desktop GL feature coverage around early GL 3.x. piglit also gets
at a lot of MSAA, fast clearing, and texture layout issues that dEQP
doesn't do much with.
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7370>
I've set it up in the gitlab-runer config on all the freedreno boards.
This means that for piglit, where the run.sh always choose either this
variable or 4 threads otherwise, we'll have the right number of parallel
tasks.
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7370>
ARM64 had it for traces only, upgrade it to a full build so we can test
a630. We also add it for armhf, as we'll want it on both rpi and etnaviv.
Bumped the LAVA tag as well, since the script changes a bit and it does
impact the final image (even if we aren't pulling in full piglit there
yet). Note I also had to drop the "v" on the tarring of their rootfs, as
the verbosity on baremetal was exceeding job log size.
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7370>
v2:
- Squashed the commit to remove tracie jobs (Eric).
v3:
- Rename *-piglit-traces jobs with *-traces (Eric).
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6388>
Christian Gmeiner
Daniel Stone
Tomeu Vizoso
Emma Anholt
Antonio Caggiano
Rob Clark
Juan A. Suarez Romero
Eric Anholt
Andres Gomez