This is currently an alias for nir_ssa_def_rewrite_uses but we move all
the instances which used it to write a non-SSA source to the newly named
helper.
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Acked-by: Alyssa Rosenzweig <alyssa@collabora.com>
Acked-By: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9383>
This appeared in softpipe's image operations, since NIR always uses
4-component values for the coords, while the GLSL IR only has 2 components
for a 2D image (for example).
arb_shader_image_load_store-shader-mem-barrier (which times out in CI and
spends its time inside of tgsi_exec) was spending 4/51 of its instructions
on moving these undefs around.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9345>
If the instruction being coalesced would be vectorized but the target
doesn't support vectorizing that op, skip coalescing.
Reuse the callbacks from alu_to_scalar to describe which ops should not
be vectorized.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6506>
All these instructions replicate the result of a N-component dot-product
to a vec4. Naming them fdot_replicatedN gives the impression that are
some sort of abstract dot-product that replicates the result to a vecN.
They also deviate from fdph_replicated... which nobody would reasonably
consider naming fdot_replicatedh.
Naming these opcodes fdotN_replicated more closely matches what they
are, and it matches the pattern of fdph_replicated.
I believe that the only reason these opcodes were named this way was
because it simplified the implementation of the binop_reduce function in
nir_opcodes.py. I made some fairly simple changes to that function, and
I think the end result is ok.
The bulk of the changes come from the sed rename:
sed --in-place -e 's/fdot_replicated\([234]\)/fdot\1_replicated/g' \
$(grep -r 'fdot_replicated[234]' src/)
v2: Use a named parameter to binop_reduce instead of using
isinstance(name, str). Suggested by Jason.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5725>
The difference between imov and fmov has been a constant source of
confusion in NIR for years. No one really knows why we have two or when
to use one vs. the other. The real reason is that they do different
things in the presence of source and destination modifiers. However,
without modifiers (which many back-ends don't have), they are identical.
Now that we've reworked nir_lower_to_source_mods to leave one abs/neg
instruction in place rather than replacing them with imov or fmov
instructions, we don't need two different instructions at all anymore.
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Reviewed-by: Vasily Khoruzhick <anarsoul@gmail.com>
Acked-by: Rob Clark <robdclark@chromium.org>
Otherwise we may end up trying to coalesce in a case such as
ssa_1 = fadd r1, r2
r3.x = fneg(r2);
r3 = vec4(ssa_1, ssa_1.y, ...)
and that would cause us to move the writes to r3 from the vec to the
fadd which would re-order them with respect to the write from the fneg.
In order to solve this, we just don't coalesce if the destination of the
vec is not SSA. We could try to get clever and still coalesce if there
are no writes to the destination of the vec between the vec and the ALU
source. However, since registers only come from phi webs and indirects,
the chances of having a vec with a register destination that is actually
coalescable into its source is very slim.
Shader-db results on Haswell:
total instructions in shared programs: 13657906 -> 13659101 (<.01%)
instructions in affected programs: 149291 -> 150486 (0.80%)
helped: 0
HURT: 592
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105440
Fixes: 2458ea95c5 "nir/lower_vec_to_movs: Coalesce movs on-the-fly when possible"
Reported-by: Vadym Shovkoplias <vadym.shovkoplias@globallogic.com>
Tested-by: Vadym Shovkoplias <vadym.shovkoplias@globallogic.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
These cases had the parameter removed:
nir/nir_lower_vec_to_movs.c: In function ‘try_coalesce’:
nir/nir_lower_vec_to_movs.c:124:66: warning: unused parameter ‘shader’ [-Wunused-parameter]
try_coalesce(nir_alu_instr *vec, unsigned start_idx, nir_shader *shader)
^
nir/nir_lower_io.c: In function ‘load_op’:
nir/nir_lower_io.c:147:32: warning: unused parameter ‘state’ [-Wunused-parameter]
load_op(struct lower_io_state *state,
^
These cases had the parameter (void) silenced because the parameter was
necessary for an interface:
nir/glsl_to_nir.cpp:1900:32: warning: unused parameter 'ir' [-Wunused-parameter]
nir_visitor::visit(ir_barrier *ir)
^
nir/nir.c: In function ‘remove_use_cb’:
nir/nir.c:802:35: warning: unused parameter ‘state’ [-Wunused-parameter]
remove_use_cb(nir_src *src, void *state)
^
nir/nir.c: In function ‘remove_def_cb’:
nir/nir.c:811:37: warning: unused parameter ‘state’ [-Wunused-parameter]
remove_def_cb(nir_dest *dest, void *state)
^
Number of total warnings in my build reduced from 2543 to 2538
(reduction of 5).
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This matches the "foreach x in container" pattern found in many other
programming languages. Generated by the following regular expression:
s/nir_foreach_use(\([^,]*\),\s*\([^,]*\))/nir_foreach_use(\2, \1)/
and similar expressions for nir_foreach_use_safe, etc.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
This matches the "foreach x in container" pattern found in many other
programming languages. Generated by the following regular expression:
s/nir_foreach_function(\([^,]*\),\s*\([^,]*\))/nir_foreach_function(\2, \1)/
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
This matches the "foreach x in container" pattern found in many other
programming languages. Generated by the following regular expression:
s/nir_foreach_instr(\([^,]*\),\s*\([^,]*\))/nir_foreach_instr(\2, \1)/
and similar expressions for nir_foreach_instr_safe etc.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
This fixes two issues. First, we had a use-after-free in the case where
the instruction got deleted and we tried to return mov->dest.write_mask.
Second, in the case where we are doing a self-mov of a register, we delete
those channels that are moved to themselves from the write-mask. This
means that those channels aren't reported as being handled even though they
are. We now stash off the write-mask before remove unneeded channels so
that they still get reported as handled.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94073
Reviewed-by: Matt Turner <mattst88@gmail.com>
Cc: "11.0 11.1" <mesa-stable@lists.freedesktop.org>
Emma Anholt
Jason Ekstrand
Eric Anholt
Erico Nunes
Ian Romanick
Jason Ekstrand
Timothy Arceri
Connor Abbott
Emil Velikov