In order to avoid having to dig through artifacts to see what failed.
Signed-off-by: Eric Engestrom <eric@igalia.com>
Acked-by: David Heidelberg <david.heidelberg@collabora.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17804>
Empirically, a successful LAVA boot time should take less than 3
minutes.
LAVA itself is configured to attempt thrice to boot the device,
summing up to 9 minutes.
It is better to retry the boot than cancel the job and re-submit to
avoid the enqueue delay.
Signed-off-by: Guilherme Gallo <guilherme.gallo@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17646>
In the future, bump will be needed to update non-VK tags as wine traces get
used elsewhere.
Reviewed-by: Andres Gomez <agomez@igalia.com>
Signed-off-by: David Heidelberg <david.heidelberg@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17623>
It seems that we sometimes stall out executing "fastboot boot", and if
that happens we want to reboot the board and try again.
Fixes: #6682
Acked-by: David Heidelberg <david.heidelberg@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17607>
It'll be re-used by piglit traces.
Reviewed-by: Guilherme Gallo <guilherme.gallo@collabora.com>
Reviewed-by: Andres Gomez <agomez@igalia.com>
Signed-off-by: David Heidelberg <david.heidelberg@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17573>
Add a global-level variable that allows disabling all jobs that would
have gone to the Igalia lab, to be used in case of outages or failures.
Reviewed-by: Eric Engestrom <eric@igalia.com>
Reviewed-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: David Heidelberg <david.heidelberg@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17178>
Sleep a bit before executing `lava-test-case` to give time for bash to dump shell xtrace messages into
the console, which may cause interleaving with `LAVA_SIGNAL_STARTTC` in some
devices like a618.
The same approach worked for `LAVA_SIGNAL_STARTRUN` since
3b8d10d270 (deafdd86b8d9d0108bc692f479c3b31c4c7d5635_161_164)
was merged.
Closes: #6867
Signed-off-by: Guilherme Gallo <guilherme.gallo@collabora.com>
Reviewed-by: David Heidelberg <david.heidelberg@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17533>
This contains some Device Generated Command tests that will be
useful for an experimental RADV implementation.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17463>
I mistakenly applied .gl-rules to the non-freedreno perf jobs, which
caused them to be incorrectly run pre-merge when core GL files changed.
Pull the freedreno core GL performance job rules out, explain a bit more
what is going on, and use it from iris and virgl performance testing.
This also drops running freedreno performance when core vulkan files
change -- freedreno perf testing doesn't have any turnip usage, nor does
it watch for turnip file changes.
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17386>
If you accidentally re-included your test job core definition after your
driver-specific ruleset, you'd end up running the driver job on every
source code change. This had happened with a630_gles_asan: it included
.baremetal-test-arm64-asan (and thus .baremetal-test) after including
.a630-test, to override .baremetal-test-arm64's depednencies to use asan
artifacts instead.
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17386>
... and explain what they're doing, compared to the test rules in
test-source-dep.yml.
Unfortunately, we can't really pull them into test-source-dep.yml with
other source deps, because of various '&'-'*' references.
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17386>
We should be explicit that we are cancelling jobs once the script finds
some log messages that are linked with known issues. That means the
script preemptively retried the job without giving chances to recover.
Adds magenta color to cancelled jobs.
Signed-off-by: Guilherme Gallo <guilherme.gallo@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17389>
Mark test_full_yaml_log with this new marker to be easily run by the
developers.
Make `debian-testing` skip this test with `not slow` marker hint.
Signed-off-by: Guilherme Gallo <guilherme.gallo@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17389>
Implement a log-based retry hint for R8152 issue described in #6681,
which is based on detecting these two consecutive lines:
```
r8152 <USB> eth0: Tx status -71
nfs: server <IP> not responding, still trying
```
Where <IP> and <USB> could be any IP and USB addresses, respectfully.
This commit is a temporary fix since it requires a section-aware log
follower, implemented in !16323. When the cited MR is merged, one will
make a proper fix on top of that.
Closes: #6681
Signed-off-by: Guilherme Gallo <guilherme.gallo@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17389>
In some jobs, such as
https://gitlab.freedesktop.org/gallo/mesa/-/jobs/24904100, the kmsg is
interleaved with stderr/stdout in serial console, making it difficult to
confidently find the log messages to detect when the DUT is booting,
when the DUT is running etc.
Luckily, LAVA sends redundant messages about their signals. We can use
them to mitigate the chance of missing an interleaved message by being
more open to different messages, using the regex on both `debug` and
`target` LAVA log levels.
Signed-off-by: Guilherme Gallo <guilherme.gallo@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16323>
There are some leftovers in the jobs logs after the result log line.
Only print until the init-stage2.sh output, to raise the chance to check
for the test script results at the first glance in the Gitlab logs.
Extra changes:
- Add `hung` status for jobs considered hanging in the Gitlab
- print them after the retry loop
Signed-off-by: Guilherme Gallo <guilherme.gallo@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16323>
This will serve to warn the user that those messages are processed
differently, e.g. the kmsgs does not trigger heartbeats and maybe
eventual targets of hint to retry the job immediately.
Signed-off-by: Guilherme Gallo <guilherme.gallo@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16323>
test_full_yaml_log is a test that will look for a LAVA log YAML file at
`/tmp/log.yaml` and consume it as it was a realtime CI job.
It is useful for debugging issues related with LAVA.
Let's keep it skipped by default, to avoid introducing entire logs into
the codebase.
Signed-off-by: Guilherme Gallo <guilherme.gallo@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16323>
Currently, the submitter consider that every new log that comes from the
DUT console is a signal that the device is healthy, but maybe that is
not the case, since in some kernel hangs/failures, no output is
presented except from some kernel messages.
This commit bypass the heartbeat when the LogFollower detect a kernel
message. Any log line that does follow the kmsg pattern will make the
job labeled as healthy again.
Signed-off-by: Guilherme Gallo <guilherme.gallo@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16323>
Now LogFollower is used to deal with the LAVA logs.
Moreover, this commit adds timeouts per Gitlab section, if a section
takes longer than expected, cancel the job and retry again.
Signed-off-by: Guilherme Gallo <guilherme.gallo@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16323>
- Create LogFollower to capture LAVA log and process it adding some
- GitlabSection and color treatment to it
- Break logs further, make new gitlab sections between testcases
- Implement LogFollower as ContextManager to deal with incomplete LAVA
jobs.
- Use template method to simplify gitlab log sections management
- Fix sections timestamps
Signed-off-by: Guilherme Gallo <guilherme.gallo@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16323>
Gitlab has support for collapsible sections, so it would be good to
create collapsed log sections for the LAVA setup logs. This way, the
Mesa developers to see only the execution of the scripts, instead of
LAVA messages clutter.
Signed-off-by: Guilherme Gallo <guilherme.gallo@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16323>
New tests, dEQP line rasterization test fix that lets Intel pass.
Clears out bogus xfails from 1.3.2.0 uprev on a630, which I suspect were
"we lost the device twice on a full run once, and those fails got pasted
in without checking if it happened a full run again" (since we haven't
seen them in other full run attempts).
Also clears out the a630 vk asan xfails (essentially all tests run) by
turning off leak detection which was just catching leaks in vkcts.
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17304>
The job will still fail, but it will at least go through until the end.
Signed-off-by: Martin Roukala (né Peres) <martin.roukala@mupuf.org>
Acked-by: Timur Kristóf <timur.kristof@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16841>
This will be used to detect soft resets without aborting the run, but
still make the job fail.
Signed-off-by: Martin Roukala (né Peres) <martin.roukala@mupuf.org>
Acked-by: Timur Kristóf <timur.kristof@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16841>
The LLVM backend is not officially supported by the RADV developers,
but it has been useful early during bring-up, or later when users are
experiencing what looks like a compiler bug. It is thus beneficial to
keep it working.
However, maintaining the vkcts expectations for every platform requires
more work and machine time than what we would like to commit to. This
is why we agreed that we would only keep LLVM tested on the latest
family of Radeon GPUs.
Signed-off-by: Martin Roukala (né Peres) <martin.roukala@mupuf.org>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Acked-by: Timur Kristóf <timur.kristof@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16841>
Most CI tests are currently running on LLVM 11 (released over 2 years
ago), which predates some of the GPUs we have in CI and prevents
testing RADV's LLVM backend.
LLVM 13 is known to work for RADV, released almost 8 months ago, and
is already available in most distributions. Fedora 36 is even already
on LLVM 14.
So this commit updates x86 testing on llvm 13.
v2:
- store the llvm apt repo key locally (Michel Dänzer)
Signed-off-by: Martin Roukala (né Peres) <martin.roukala@mupuf.org>
Acked-by: Timur Kristóf <timur.kristof@gmail.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17188>
This avoids the risks of concatenating our rulesets missing out on some
file list because of a "never" in the middle.
Reviewed-by: Guilherme Gallo <guilherme.gallo@collabora.com>
Acked-by: Eric Engestrom <eric@engestrom.ch>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17287>
Not only runs less testing when only one driver is impacted, but also
makes sure zink+turnip is turned off when the farm is.
Reviewed-by: Guilherme Gallo <guilherme.gallo@collabora.com>
Acked-by: Eric Engestrom <eric@engestrom.ch>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17287>
This drops the mesa/gallium lists from some build rules, since zink common
rules brings them in already. If we do more driver common rules, we might
end up with those core lists appearing in the yaml multiple times, but
that seems like a small price to pay for not being able to forget some.
Reviewed-by: Guilherme Gallo <guilherme.gallo@collabora.com>
Acked-by: Eric Engestrom <eric@engestrom.ch>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17287>
Because !references merging happens after yaml parsing, this lets us
remove a duplicated definition between .test-source-dep.yml and
.gitlab-ci.yml.
Reviewed-by: Guilherme Gallo <guilherme.gallo@collabora.com>
Acked-by: Eric Engestrom <eric@engestrom.ch>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17287>
LAVA job logs have an ongoing problem of message interleaving with kmsg.
So any kernel dumps and LAVA signals (which are being printed in kmsg)
will have a chance to clutter the pattern matching for `hwci: mesa:
(pass|fail)` line.
v2:
- Add an 1 second sleep before exiting the test script, to give enough
time to print the result message without conflicting with LAVA ENDTC
signal from kmsg
Closes: #6714
Signed-off-by: Guilherme Gallo <guilherme.gallo@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17175>
The libvulkan-dev was needed for building zink, which ended up turning on
the vulkan tests in piglit. Split them out here.
Reviewed-by: David Heidelberg <david.heidelberg@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17125>
Additionally improve the style of the build script.
- Instead of using platform build tools, use the CMake wrappers
- Instead of build all targets, then manually stripping, use the
CMake helpers.
Contributed by Andres Gomez.
Reviewed-by: Martin Roukala <martin.roukala@mupuf.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17184>
This is needed for some of Valve's GL traces to run.
Additionally, make the building commands for apitrace more standard.
Contributed by Andres Gomez.
Reviewed-by: Martin Roukala <martin.roukala@mupuf.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17184>
Debian's Wine 5.0 has shown some problems when running Vulkan tests in
the past. Let's install the stable version provided by WineHQ (7.0 at
this time).
v2:
- Remove OBS repository for Wine since it is unused (previously, it
was providing libfaudio0) (Daniel).
v3:
- Add WineHQ's repository GPG key (Michel).
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Martin Roukala <martin.roukala@mupuf.org> [v2]
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17184>
`x86_build-base-wine.sh` are usd to install wine and xvfb
`x86_build-mingw-patch.sh` are used to pull packages from msys2 that can be directly used.
`x86_build-mingw-source-deps.sh` are used to building llvm, libclc, clang, spirv-tools and directx-headers from source
xvfb are used to enable wgl tests on debian
Signed-off-by: Yonggang Luo <luoyonggang@gmail.com>
Acked-by: Jesse Natalie <jenatali@microsoft.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16084>
In trying to figure out why an rpi3 job took so long, I wished that the
wget verbosity was hidden by default, and that it told me how long it took
like other sections do.
Reviewed-by: Juan A. Suarez <jasuarez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17146>
We had it set up for arm64 asan already, do it for everyone else too. In
cleaning up the duplication, this fixes a pasteo in rpi3 which had the
"artifacts: false" on the wrong job, causing it to do a slow download of
the mesa build from gitlab.
Doing this required also moving the ".use-debian/arm_test" in as well, so
that its "needs:" didn't overwrite ours if it appeared after us in the
consumer's "extends:"
Should save about 20 seconds on rpi3 jobs.
Reviewed-by: Juan A. Suarez <jasuarez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17146>
This is not one of the valid stages in the top level "stages:"
declaration, you're supposed to get your stage from your
test-source-dep.yml include. Avoids issues when .baremetal-test gets
included after your test-source-dep.
Acked-by: Daniel Stone <daniels@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17146>
Some LAVA jobs emit lots of messages "Listened to connection for
namespace 'common' for up to 1s" in a row at the end of the logs, making
difficult to see the result of the test script.
This commit removes those lines until a proper solution is deployed on
the LAVA side.
Closes: #6116
Signed-off-by: Guilherme Gallo <guilherme.gallo@collabora.com>
Acked-by: Emma Anholt <emma@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17151>
This should help with "marge got stuck for an hour and all I got was this
failed job with no results/" when a system intermittently wedges.
This replaces the BM_POE_TIMEOUT ("did we get something on serial in the
last 3 minutes?") that rpi had, in favor of checking that the whole test
job gets through in 20 minutes.
Acked-by: Juan A. Suarez <jasuarez@igalia.com>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17096>
My local trogdor has a netboot firmware and I want to be able to use it to
test the timeout code I'm working on.
Acked-by: Juan A. Suarez <jasuarez@igalia.com>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17096>
If the SerialBuffers can just feed the same line queue, then we don't need
the extra threads reading line queues into a new merged line queue.
Less python threading code is always better. Plus, now we can pass args
to SerialBuffer.lines() for timeout/phase.
Acked-by: Juan A. Suarez <jasuarez@igalia.com>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17096>
This should avoid the 1-hour timeouts if something goes wrong, and just
restart.
Fixes: #6682
Acked-by: Juan A. Suarez <jasuarez@igalia.com>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17096>
My editor likes to pep8 as I edit, and I'm tired of carefully not
committing those changes.
Acked-by: Juan A. Suarez <jasuarez@igalia.com>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17096>
Every few weeks we'd get a flake where the script noticed the devcore
right as we were wrapping up, and then tar would exit because the file it
was tarring changed underneath it. Just kill devcores before we do that
-- even if we kill it while it's working, it's so rare that it probably
won't bother anyone.
Fixes: #5867
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16820>
This way we don't force a CI run on all platforms anytime we add a
group of test, and, as a bonus, we make dozen CI consistent with other
platforms.
Suggested-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Suggested-by: Emma Anholt <emma@anholt.net>
Reviewed-by: Jesse Natalie <jenatali@microsoft.com>
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17074>
Already have access into traces-db-restricted repository, so this just
allow me to trigger the job without patching.
Signed-off-by: David Heidelberg <david.heidelberg@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17016>
The 2.6 version is old (released 4 months ago), the latest contains
even more useful tests (+2900 tests). Use the master branch by default,
so it could be regularly updated.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Martin Roukala <martin.roukala@mupuf.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17105>
This reverts commit 4824396572.
The newest version of b2c has changed the mount point of the cache
device, which is has proven to be working very well in my local
testing, but ends up confusing podman when the cache device had been
initialized using an older version of b2c. The end result is that we
end up using tmpfs to run our jobs, and some machines just run out of
RAM before the end of the job...
We'll be fixing this issue, cut a new b2c release, then re-introduce
in Mesa.
Signed-off-by: Martin Roukala (né Peres) <martin.roukala@mupuf.org>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17120>
The latest version of the initramfs brings in the latest podman, but
most importantly brings in the usage of collapsed sections, thus
reducing the amount of scrolling up necessary when wanting to find out
the list of failures/flakes.
Signed-off-by: Martin Roukala (né Peres) <martin.roukala@mupuf.org>
Acked-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17051>
Do not need to cross compile just for running the testsuite. Only
RADV will make use of it anyways.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Martin Roukala <martin.roukala@mupuf.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17050>
Currently, the LAVA job submitter is employing a temporary solution for
the bash escape code mangling in the LAVA jobs. Until the issue is not
fixed on the LAVA side, the submitter will replace the wrong characters
with the fixed ones.
This commit improves the regex pattern to comprehend the scenarios of
color codes with font formatting and background color information, such
as: `echo -e "\e[1;41;39mRed background with white bold text color\e[0m"`
Fixes: #5503
Signed-off-by: Guilherme Gallo <guilherme.gallo@collabora.com>
Reviewed-by: David Heidelberg <david.heidelberg@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17046>
When the 'vm stop' command fails because the crosvm instance
that would be listening to it is already dead, remove the
socket file to avoid crosvm complaining and refusing to boot
Reviewed-by: Emma Anholt <emma@anholt.net>
Reviewed-by: David Heidelberg <david.heidelberg@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16963>
debian/i386 needs cross compile of `DirectX-Headers`, so just enable spirv-to-dxil on debian/x64
Signed-off-by: Yonggang Luo <luoyonggang@gmail.com>
Reviewed-by: Jesse Natalie <jenatali@microsoft.com>
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16671>
zink-anv-tgl wasn't using Zink at all because this variable was missing
and then not passed to the runners...
This introduces a list of failures for Zink/Anv and also few tests
are skipped because they take too long (> 60s).
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Martin Roukala <martin.roukala@mupuf.org>
Acked-by: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17031>
Compiling code should be done in docker containers using --isolation=process for efficiency,
but installing dependencies will fail when run that way. Split the "install" dependencies from
the "build" dependencies, so the former can be run in a container using --isolation=hyperv,
and the latter can use --isolation=process.
Signed-off-by: Yonggang Luo <luoyonggang@gmail.com>
Reviewed-by: Jesse Natalie <jenatali@microsoft.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16934>
By building everything under `deps` directory, remove the `deps` after
them installed.
We can use spirv-as from Vulkan-SDK, so that test won't depends on mesa-deps
Signed-off-by: Yonggang Luo <luoyonggang@gmail.com>
Reviewed-by: Jesse Natalie <jenatali@microsoft.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16934>
NOTE:
Microsoft.VisualStudio.Component.Windows10SDK.19041 are part of
Microsoft.VisualStudio.Workload.NativeDesktop, so it's actually using Windows10SDK.19041 before,
not Windows10SDK.18362
Signed-off-by: Yonggang Luo <luoyonggang@gmail.com>
Reviewed-by: Jesse Natalie <jenatali@microsoft.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16934>
Then we can remove cmd.exe invocations, and spread those configure commands
over multiple lines since they're not strings anymore.
Signed-off-by: Yonggang Luo <luoyonggang@gmail.com>
Reviewed-by: Jesse Natalie <jenatali@microsoft.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16934>
Get `Vulkan-SDK` `Vulkan-Runtime` `SPIRV-Tools` and `SPIRV-Headers` to be consistence version
Signed-off-by: Yonggang Luo <luoyonggang@gmail.com>
Reviewed-by: Jesse Natalie <jenatali@microsoft.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16934>
While we're at it, do the same thing when creating the llvm-project directory
Signed-off-by: Yonggang Luo <luoyonggang@gmail.com>
Reviewed-by: Jesse Natalie <jenatali@microsoft.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16934>
installPath is too generic
Signed-off-by: Yonggang Luo <luoyonggang@gmail.com>
Reviewed-by: Jesse Natalie <jenatali@microsoft.com>
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16934>
Until now, we have been extracing the install.tar image on the gitlab
runner before sharing it to the test machine through a MINIO bucket.
It turns out that hardlinks and symlinks do not get shared, so let's
just extract the tarball directly on the test machine to fix the issue.
Signed-off-by: Martin Roukala (né Peres) <martin.roukala@mupuf.org>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16968>
I recently fixed one issue that triggered an assertion in the
Vulkan common code. This was because the tool allocated cmdbuf
from the wrong pool (in presence of multiple queues).
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Martin Roukala <martin.roukala@mupuf.org>
Reviewed-by: Emma Anholt <emma@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17002>
We need the fix adding a Block decoration to the BuiltIn struct in
SpvModuleScopeVarParserTest_BuiltinPosition_BuiltIn_Position_Initializer.spvasm.
Reviewed-by: Jesse Natalie <jenatali@microsoft.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16221>
Also document additional piglit failures and passes.
Multiple changes, mostly notable:
- few new tests
- fixed test for upcoming mesa MR
Reviewed-by: Emma Anholt <emma@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16785>
Since we're now actually running Vulkan tests on Dozen, the comment
was wrong and we actually want the runtime. The referenced issue
has been fixed anyway.
Acked-by: Daniel Stone <daniels@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16756>
In addition to pushing it to the current latest stable, the v5.17 kernel
for mesa CI pulls a patch to address a regression in drm that affects at
least the lima jobs.
The dtb for sc7180-trogdor-lazor-limozeen-nots is also updated since the
old one no longer exists in v5.17.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Reviewed-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16641>
LAVA is mangling the escape codes from ANSI during log fetching from the
target device, making the gitlab section markers from deqp, for example,
to not work, inputting noise into the log.
This commit makes the simplest fix which is to replace the mangled
characters to the fixed ones.
This approach is error-prone, since it may unwittingly replace a genuine
log that resembles the mangled escape code. But this solution should
suffice until we get a proper fix from LAVA team itself.
Signed-off-by: Guilherme Gallo <guilherme.gallo@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16520>
LAVA is mangling the escape codes from ANSI during log fetching from the
target device, making the colored lines from deqp, for example, to not
work, inputting noise into the log.
This commit makes the most straightforward fix which is to replace the
mangled characters to the fixed ones.
This approach is error-prone since it may unwittingly replace a genuine
log that resembles the mangled escape code. But this solution should
suffice until we get a proper fix from LAVA developers itself.
Fixes: #5503
Signed-off-by: Guilherme Gallo <guilherme.gallo@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16520>
When deqp-runner times out, it kills the deqp process, which in our case
is the previous invocation of our shell script, so the crosvm and socat
cleanup never happened. crosvm has a way to cleanly shut down a previous
crosvm invocation, so let's just use that and do our cleanup when we need
to.
Reviewed-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16485>
The experimental support has been merged for months already, but has
been left unexercised in CI even though dEQP has a mesh_shader.nv
category.
This commit enables the experimental support, which should bring
additional testing \o/.
Suggested-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Martin Roukala (né Peres) <martin.roukala@mupuf.org>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Acked-by: Timur Kristóf <timur.kristof@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16550>
Also document additional piglit failures and crashes with new tests.
Multiple changes, mostly notable:
- few new tests
- traces downloader improvements
Reviewed-by: Emma Anholt <emma@anholt.net>
Signed-off-by: David Heidelberg <david.heidelberg@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16428>
We currently default to 4h of execution time, but this is unnecessary
on all our platforms. Tighten it to 45 minutes per run, and overall of
1.5h to allow for restarts.
Signed-off-by: Martin Roukala (né Peres) <martin.roukala@mupuf.org>
Acked-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16472>
I am not super happy about doing this, as this means we will
potentially be introducing regressions because CI would have papered
over a rare race condition... But the situation is that this is already
happening, and improving the reliability will likely come from tracking
the occurence rate of hangs in an external system.
Signed-off-by: Martin Roukala (né Peres) <martin.roukala@mupuf.org>
Acked-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16472>
Currently, the LAVA job submitter fetches the job results from the LAVA
XMLRPC call, but that is not necessary, as the job result is easily
found in the logs. E.g. the bare-metal and poe jobs uses that log to set
the final job status of their runs.
Another reason for the change is that the LAVA signals are not reliable
in some devices with one serial port, causing some troubles in a618
recently. So, if one signal fails to be sent/received, the job will
ultimately fail even when the hwci script has been successful.
Fixes: #6435
Signed-off-by: Guilherme Gallo <guilherme.gallo@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16425>
This was set as an attempt to detect when the GPU got hung, and let
our hangcheck detect this issue and kill the run. This however has
not been working so well, so let's try without it.
Suggested-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Martin Roukala (né Peres) <martin.roukala@mupuf.org>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16423>
This parameter is used by radv-ci to perform extra validation while
running VKCTS.
This change catches more issues, which are will be addressed in !16248:
- dEQP-VK.subgroups.ballot_broadcast.compute.subgroupbroadcast_i8vec2,Crash
- dEQP-VK.subgroups.ballot_broadcast.compute.subgroupbroadcast_u8vec2,Crash
Signed-off-by: Martin Roukala (né Peres) <martin.roukala@mupuf.org>
Suggested-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Acked-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16277>
This reverts commit 0464117ad9. Now that
the shim back-channel communicates with nouveau that the "GPU" is always
idle, we can get the nouveau compiler back into the CI path.
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16150>
After a LAVA job submitter rework, the init-stage2.sh was changed to be
compatible with new LAVA job definitions, but the result from the script
represented by `HWCI_TEST_SCRIPT` variable is obfuscated by the `set -e`
command. So when the test script fails, `set` will override the exit
code and the jobs will pass when they should fail.
Signed-off-by: Guilherme Gallo <guilherme.gallo@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16325>
Rarely the jobs.logs RPC call can return corrupted data, such as
mal-formed YAML data. As this is expected and very rare to occur, let's
retry this RPC call several times to give it a chance to fix itself.
Retrying would not swallow the log lines since we keep track of how many
log lines each job has.
Signed-off-by: Guilherme Gallo <guilherme.gallo@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15938>
Move exceptions to its own file.
Create MesaCITimeoutError and MesaCIRetryError with specific exception
data for better exception classification.
Avoid the use of `fatal_err` in favor of raising a proper exception.
Make _call_proxy exception handling exhaustive, add missing
ResponseError treatment.
Also, detect JobError during job result parsing. So when a LAVA timeout error
happens, it is probably cause by some boot/network issues with a
specific device, we can retry the same job in other device with the same
device_type.
Signed-off-by: Guilherme Gallo <guilherme.gallo@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15938>
During development, we may want to test lava_job_submitter.py locally,
sometimes one can find what one is been looking for before the LAV job
is done. Let's respond to SIGINT signal and cancel the LAVA job, as we
can't follow what is happening anymore via script.
Signed-off-by: Guilherme Gallo <guilherme.gallo@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15938>
A normal boot on LAVA device would take less than 1 minute. Sometimes
the depthcharge freezes and LAVA waits until the current timeout (25
minutes) to kick in and fail the job.
With this lower timeout value, the job could fail faster and eventually
LAVA will be able to retry it.
Furthermore, set a default timeout for all actions to fix an undesired
behavior with some LAVA job subactions, such as depthcharge-action.
Signed-off-by: Guilherme Gallo <guilherme.gallo@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15938>
Make jwt-file argument optional, this means that this submitter could
deal with more generic use cases, such as running it locally, since the
MINIO JWT is a sensitive information, which is not really required to
test if the submitter is working well.
Signed-off-by: Guilherme Gallo <guilherme.gallo@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15938>
LAVA can filter which test suite to show the results from, let's list
all testcases possible in the mesa test suite, to be able to divide more
complex jobs into test_cases.
Another advantage is that the test case can vary its name.
Signed-off-by: Guilherme Gallo <guilherme.gallo@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15938>
Now, every rootfs based device has bash installed, so we can use bash
shebang instead of dash to enforce the use of bash's echo, not dash's
one.
Signed-off-by: Guilherme Gallo <guilherme.gallo@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15938>
Any daemon executed in init-stage2.sh may interfere with LAVA signals,
since any threaded output to console may clutter the signals, which are
based on the log output.
E.g: This job
https://gitlab.freedesktop.org/gallo/mesa/-/jobs/20779120#L2102
has failed because capture-devcoredump.sh was alive and emitting kernel
messages to the console during the LAVA signal handling, mangling the
output and making the LAVA to fail to check the results of the job.
Another problem is that CONFIG_DEBUG_STACK_USAGE Kconfig is enabled.
This causes process exit to dump a `RESULT=[ 246.756067] lava-test-case
(156) used greatest stack depth: ... bytes left` kernel message to the
logs corrupting LAVA signal message. Empirically, it happens one in
every 280 jobs. To solve that, compose the lava-test-case custom script
with a short sleep to give time for kernel to dump the message clearly
and a exit command to keep the return code from init-stage2.sh script.
Signed-off-by: Guilherme Gallo <guilherme.gallo@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15938>
The exit code is automatically parsed to fail/pass the job, so this
commit removes the `hwci.*pass|fail` regex and printings.
Add mesa-job-name parameter to get the CI_JOB_NAME easily to serve as
test name.
Besides, there is the treatment for the mesa job naeme, as LAVA does not
like whitespace character inside the test case/suite name, since it
interprets it as a LAVA signal parameter and it can make the job fail
when the script looks for the results from the LAVA RPC.
And the slash character seems to break gitlab log sectioning, so
removing every character after the first whitespace.
Signed-off-by: Guilherme Gallo <guilherme.gallo@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15938>
By default, LAVA emit signals as specific lines of message to the
console serial for subsequent parsing. However, this is prone to be
interleaved with the dmesg messages, particularly with debug messages
that can happen just after the process exit, such as the ones set by
CONFIG_STACK_DEBUG_USAGE Kconfig.
Setting the `lava-signal` to `kmsg` will make those special messages to
be dumped to /dev/kmsg, where the each line is printed atomically
Signed-off-by: Guilherme Gallo <guilherme.gallo@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15938>
When jobs.validate returns something, it means that there is a dict
filled with the error message, so we were running the job with some
validation errors for a quite while
Signed-off-by: Guilherme Gallo <guilherme.gallo@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15938>
Start to differentiate between the different types of LAVA log message;
the only visible change right now is that we make warnings and errors
bold and red to match bare-metal, but it comes in useful later as we
will use the results markers to watch us step through the different
stages of job execution.
Signed-off-by: Guilherme Gallo <guilherme.gallo@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15938>
Less free-form passing stuff around, and also makes it easier to
implement log-based following in future.
The new class has:
- job log polling: This allows us to get rid of some more function-local
state; the job now contains where we are, and the timeout etc is
localised within the thing polling it.
- has-started detection into job class
- heartbeat logic to update the job instance state with the start time
when the submitter begins to track the logs from the LAVA device
Besides:
- Split LAVA jobs and Mesa CI policy
- Update unit tests with LAVAJob class
Signed-off-by: Guilherme Gallo <guilherme.gallo@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15938>
We rate-limit LAVA API calls as they are standard polling calls rather
than blocking for changes. However when we sleep after making the calls
rather than before, we can block when we want to exit - e.g. after
getting the final logs, we will still sleep even though we can drop out.
Fix this by moving the calls to before the API calls, rather than after.
This means that the first calls (when we're waiting to be scheduled, or
haven't got our first log lines yet), will be delayed compared to
previously, but that's not going to slow us down as even in the best
case we won't be executing in a device within the first 15 seconds.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15938>
As an additional measure to mitigate thermal throttling, set the upper
limit for the CPU scaling frequency to 65% of maximum allowed by the
hardware.
The impact on the overall tests duration should be minimal since the
performance tests do not really put high load on the CPU.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Guilherme Gallo <guilherme.gallo@collabora.com>
Acked-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16164>
Update intel-gpu-freq.sh script to offer the possibility to adjust CPU
operating frequencies in addition to GPU.
Note this is currently limited to just setting the maximum scaling
frequency as percentage of the maximum frequency allowed by the
hardware.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Guilherme Gallo <guilherme.gallo@collabora.com>
Acked-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16164>
By enabling monitoring, we can collect all kind of metrics such as
CPU/Memory/Disk usage during execution, allowing us to detect
bottlenecks.
Signed-off-by: Martin Roukala (né Peres) <martin.roukala@mupuf.org>
Reviewed-by: Charlie Turner <cturner@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15555>
This new kernel also brings support for sensors, which makes will
enable us to monitor metrics during the execution of tests.
Signed-off-by: Martin Roukala (né Peres) <martin.roukala@mupuf.org>
Reviewed-by: Charlie Turner <cturner@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15555>
The `IMAGE_UNDER_TEST` variable set in `.b2c-test` got broken with
the merge of 7d474c1 (ci: Move most stuff out of root .gitlab-ci.yml).
During the shuffling, the `MESA_BASE_TAG` and `MESA_IMAGE_TAG`
variables were dropped, leading to `IMAGE_UNDER_TEST` being an
unexisting container.
To make this issue less likely to happen in the future, this patch
drops the code duplication that led to `IMAGE_UNDER_TEST` to be
the same as `MESA_IMAGE` and instead re-uses .use-debian/x86_test-vk
to generate `MESA_IMAGE`, which we then use verbatim in
`IMAGE_UNDER_TEST`.
The renaming is `MESA_IMAGE` into `IMAGE_UNDER_TEST` there to make the
distinction clear between the image run by gitlab-runner (what is
usually called `MESA_IMAGE` but we instead hardcode to valve-infra's
trigger container), and the image we are running on the test machines.
Fixes: 7d474c1 (ci: Move most stuff out of root .gitlab-ci.yml)
Signed-off-by: Martin Roukala (né Peres) <martin.roukala@mupuf.org>
Reviewed-by: Charlie Turner <cturner@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15555>
Unlike all the other test configurations, we also want to drop the
Windows container build when our Windows machines aren't available.
Missed in !16055.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16077>
Marge jobs are failing at their 1 hour timeout regularly because windows
CI lacks capacity. In the job I looked at, this test took 18 minutes,
which is surely contributing to the load. Cut it down to get us some hope
of getting MRs through that run windows jobs.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16062>
We know it's not conformant and that's OK.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16031>
it's used by 3 different drivers, so it shouldn't be in radeonsi
Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Mihai Preda <mhpreda@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15907>
A custom branch of `deqp` is used to have proper results when
crashing. See:
https://github.com/KhronosGroup/VK-GL-CTS/issues/311
A custom branch of `deqp-runner` with Windows support is also
used until the changes are merged into the main repository.
The `api`, `info`, `draw`, `query-pool` and `memory` test cases are
executed for now.
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Acked-by: Boris Brezillon <boris.brezillon@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15742>
This file was getting a bit hard to navigate. Split container, build and
test jobs to their own files.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Emma Anholt <emma@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15891>
To make it possible to use a kernel different from that built along with
the rootfs.
This can make it more convenient for other projects to reuse these
scripts.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Emma Anholt <emma@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15891>
pal1000
Eric Engestrom
Guilherme Gallo
David Heidelberg
Emma Anholt
Jesse Natalie
Samuel Pitoiset
Corentin Noël
Martin Roukala (né Peres)
Christian Gmeiner
Boris Brezillon
Andres Gomez
Charlie Turner
Yonggang Luo
Sergi Blanch Torne
Louis-Francis Ratté-Boulianne
Erik Faye-Lund
Mike Blumenkrantz
Timothy Arceri
Juan A. Suarez Romero
Erico Nunes
Sil Vilerino
Dave Airlie
Daniel Stone
Cristian Ciocaltea
Konstantin Seurer
Marek Olšák
Tomeu Vizoso