Signed-off-by: Karol Herbst <kherbst@redhat.com>
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Replace calls to create hash tables and sets that use
_mesa_hash_pointer/_mesa_key_pointer_equal with the helpers
_mesa_pointer_hash_table_create() and _mesa_pointer_set_create().
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Acked-by: Eric Engestrom <eric@engestrom.ch>
the naming is a bit confusing no matter how you look at it. Within SPIR-V
"global" memory is memory accessible from all threads. glsl "global" memory
normally refers to shader thread private memory declared at global scope. As
we already use "shared" for memory shared across all thrads of a work group
the solution where everybody could be happy with is to rename "global" to
"private" and use "global" later for memory usually stored within system
accessible memory (be it VRAM or system RAM if keeping SVM in mind).
glsl "local" memory is memory only accessible within a function, while SPIR-V
"local" memory is memory accessible within the same workgroup.
v2: rename local to function as well
v3: rename vtn_variable_mode_local as well
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
These correspond directly to SPIR-V's OpPtrAccessChain. As such, they
treat whatever their parent gives them as if it's the first element in
some array and dereferences that array. If the parent is, itself, an
array deref, then the two indices can just be added together to get the
final array deref. However, it can also be used in cases where what you
have is a dereference to some random vec2 value somewhere. In this
case, we require a cast before the ptr_as_array and use the ptr_stride
field in the cast to provide a stride for the ptr_as_array derefs.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Previously, NIR had a single nir_var_uniform mode used for atomic
counters, UBOs, samplers, images, and normal uniforms. This commit
splits this into nir_var_uniform and nir_var_ubo where nir_var_uniform
is still a bit of a catch-all but the nir_var_ubo is specific to UBOs.
While we're at it, we also rename shader_storage to ssbo to follow the
convention.
We need this so that we can distinguish between normal uniforms and UBO
access at the deref level without going all the way back variable and
seeing if it has an interface type.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Makes debugging easier when we care about the deref chain and not the
deref instruction itself. To make it take a const pointer, constify
some of the static functions in nir_print.c.
Reviewed-by: Eric Anholt <eric@anholt.net>
This is a squash of a few distinct changes:
glsl,spirv: Generate 1-bit Booleans
Revert "Use 32-bit opcodes in the NIR producers and optimizations"
Revert "nir/builder: Generate 32-bit bool opcodes transparently"
nir/builder: Generate 1-bit Booleans in nir_build_imm_bool
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Tested-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This commit adds support for 1-bit Booleans and integers. Booleans
obviously take a value of true or false. Because we have to define the
semantics of 1-bit signed and unsigned integers, we define uint1_t to
take values of 0 and 1 and int1_t to take values of 0 and -1. 1-bit
arithmetic is then well-defined in the usual way, just with fewer bits.
The definition of int1_t and uint1_t doesn't usually matter but we do
need something for purposes of constant folding.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Tested-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This helps a lot when debugging image load/store lowering on large
testcases. Unfortunately the Mesa enum name stuff is under src/mesa and
we can't get at it from the compiler.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
We normally call with stderr which is unbuffered, so this won't affect
that, but it does let me call nir_print_shader(nir, fopen("log", "w+"))
from gdb and actually get the whole shader in my file.
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
This also changes spirv_to_nir and glsl_to_nir to set them. The one
place that doesn't set them is shared memory access lowering in
nir_lower_io. That will have to be updated before any consumers of it
can effectively use these new alignments.
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Acked-by: Karol Herbst <kherbst@redhat.com>
This commit expands the current memory access enum to contain the extra
two bits provided for images. We choose to follow the SPIR-V convention
of NonReadable and NonWriteable because readonly implies that you *can*
read so readonly + writeonly doesn't make as much sense as NonReadable +
NonWriteable.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This breaks printing input/output variables with more than
4 components like mat4.
Fixes: 1beef89ad8 ("nir: prepare for bumping up max components to 16")
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
OpenCL knows vector of size 8 and 16.
v2: rebased on master (nir_swizzle rework)
rework more declarations with nir_component_mask_t
adjust print_var_decl
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Commit 5fb69daa6076e56b deleted support from nir_print for printing the
texture and sampler indices on texture instructions. This commit just
brings it back as best as we can.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Acked-by: Rob Clark <robdclark@gmail.com>
Acked-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Acked-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This commit completely reworks function calls in NIR. Instead of having
a set of variables for the parameters and return value, nir_call_instr
now has simply has a number of sources which get mapped to load_param
intrinsics inside the functions. It's up to the client API to build an
ABI on top of that. In SPIR-V, out parameters are handled by passing
the result of a deref through as an SSA value and storing to it.
This virtue of this approach can be seen by how much it allows us to
delete from core NIR. In particular, nir_inline_functions gets halved
and goes from a fairly difficult pass to understand in detail to almost
trivial. It also simplifies spirv_to_nir somewhat because NIR functions
never were a good fit for SPIR-V.
Unfortunately, there is no good way to do this without a mega-commit.
Core NIR and SPIR-V have to be changed at the same time. This also
requires changes to anv and radv because nir_inline_functions couldn't
handle deref instructions before this change and can't work without them
after this change.
Acked-by: Rob Clark <robdclark@gmail.com>
Acked-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Acked-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Acked-by: Rob Clark <robdclark@gmail.com>
Acked-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Acked-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This commit adds a new instruction type to NIR for handling derefs.
Nothing uses it yet but this adds the data structure as well as all of
the code to validate, print, clone, and [de]serialize them.
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Acked-by: Rob Clark <robdclark@gmail.com>
Acked-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Acked-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
v2 (Jose Maria Casanova Crespo <jmcasanova@igalia.com>): add float16 support
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Jose Maria Casanova Crespo <jmcasanova@igalia.com>
Not used in GL but 8 and 16 component vectors exist in OpenCL.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
... as can happen with various types like mat4, or else we'll smash the
stack writing past the end of components_local[].
Fixes: 5a0d3e1129 ("nir: Print the components referenced for split or
packed shader in/outs.")
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
While normally we give variables whose name field is NULL a temporary
name when called from nir_print_shader(), when we were calling from
nir_print_instr() we never bothered, meaning that we just segfaulted
when trying to print out instructions with such a variable. Since
nir_print_instr() is meant to be called while debugging, we don't need
to bother too much about giving a consistent name, but we don't want to
crash in the middle of debugging.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Commit e1af20f18a changed the shader_info
from being embedded into being just a pointer. The idea was that
sharing the shader_info between NIR and GLSL would be easier if it were
a pointer pointing to the same shader_info struct. This, however, has
caused a few problems:
1) There are many things which generate NIR without GLSL. This means
we have to support both NIR shaders which come from GLSL and ones
that don't and need to have an info elsewhere.
2) The solution to (1) raises all sorts of ownership issues which have
to be resolved with ralloc_parent checks.
3) Ever since 00620782c9, we've been
using nir_gather_info to fill out the final shader_info. Thanks to
cloning and the above ownership issues, the nir_shader::info may not
point back to the gl_shader anymore and so we have to do a copy of
the shader_info from NIR back to GLSL anyway.
All of these issues go away if we just embed the shader_info in the
nir_shader. There's a little downside of having to copy it back after
calling nir_gather_info but, as explained above, we have to do that
anyway.
Acked-by: Timothy Arceri <tarceri@itsqueeze.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
v2: Rebase on 19a541f (nir: Get rid of nir_constant_data)
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Connor Abbott <cwabbott0@gmail.com> [v1]
git grep -l comparitor | xargs sed -i 's/comparitor/comparator/g'
Just happened to notice this in a patch that was sent and included one
of the tokens in question.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Acked-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
In 19a541f (nir: Get rid of nir_constant_data) a number of places that
operated on nir_constant::values were mechanically converted to operate
on the whole array without regard for the base type. Only
GLSL_TYPE_FLOAT and GLSL_TYPE_DOUBLE can be matrices, so only those
types can have data in the non-0 array element.
See also b870394.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
Cc: Iago Toral Quiroga <itoral@igalia.com>
This has bothered me for about as long as NIR has been around. Why do we
have two different unions for constants? No good reason other than one of
them is a direct port from GLSL IR.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
This only useful for spir-v shaders, but I keep finding myself
having to add it.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Certain built-in arrays, such as gl_ClipDistance[], gl_CullDistance[],
gl_TessLevelInner[], and gl_TessLevelOuter[] are specified as scalar
arrays. Normal scalar arrays are sparse - each array element usually
occupies a whole vec4 slot. However, most hardware assumes these
built-in arrays are tightly packed.
The new var->data.compact flag indicates that a scalar array should
be tightly packed, so a float[4] array would take up a single vec4
slot, and a float[8] array would take up two slots.
They are still arrays, not vec4s, however. nir_lower_io will generate
intrinsics using ARB_enhanced_layouts style component qualifiers.
v2: Add nir_validate code to enforce type restrictions.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
When restoring something from shader cache we won't have and don't
want to create a nir_shader this change detaches the two.
There are other advantages such as being able to reuse the
shader info populated by GLSL IR.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
glsl_print_type() prints arrays of arrays incorrectly. For example,
a type with name float[3][7] would be printed as float[7][3]. (This
is an array of length 3 containing arrays of 7 floats.) cdecl says
that the type name is correct.
glsl_print_type() doesn't really do anything above and beyond printing
type->name, and glsl_print_struct() wasn't used at all. So, drop them.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Timothy Arceri <timothy.arceri@collabora.com>
Previously we would not print a swizzle on ssa_52 when only its .x
component is used (as seen in the definition of ssa_53):
vec3 ssa_52 = fadd ssa_51, ssa_51
vec1 ssa_53 = flog2 ssa_52
vec1 ssa_54 = flog2 ssa_52.y
vec1 ssa_55 = flog2 ssa_52.z
But this makes the interpretation of the RHS of the definition difficult
to understand and dependent on the size of the LHS. Just print swizzles
when they are not the identity swizzle, so the previous example is now
printed as:
vec3 ssa_52 = fadd ssa_51.xyz, ssa_51.xyz
vec1 ssa_53 = flog2 ssa_52.x
vec1 ssa_54 = flog2 ssa_52.y
vec1 ssa_55 = flog2 ssa_52.z
Reviewed-by: Timothy Arceri <timothy.arceri@collabora.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Backends can normally handle shader inputs solely by looking at
load_input intrinsics, and ignore the nir_variables in nir->inputs.
One exception is fragment shader inputs. load_input doesn't capture
the necessary interpolation information - flat, smooth, noperspective
mode, and centroid, sample, or pixel for the location. This means
that backends have to interpolate based on the nir_variables, then
associate those with the load_input intrinsics (say, by storing a
map of which variables are at which locations).
With GL_ARB_enhanced_layouts, we're going to have multiple varyings
packed into a single vec4 location. The intrinsics make this easy:
simply load N components from location <loc, component>. However,
working with variables and correlating the two is very awkward; we'd
much rather have intrinsics capture all the necessary information.
Fragment shader input interpolation typically works by producing a
set of barycentric coordinates, then using those to do a linear
interpolation between the values at the triangle's corners.
We represent this by introducing five new load_barycentric_* intrinsics:
- load_barycentric_pixel (ordinary variable)
- load_barycentric_centroid (centroid qualified variable)
- load_barycentric_sample (sample qualified variable)
- load_barycentric_at_sample (ARB_gpu_shader5's interpolateAtSample())
- load_barycentric_at_offset (ARB_gpu_shader5's interpolateAtOffset())
Each of these take the interpolation mode (smooth or noperspective only)
as a const_index, and produce a vec2. The last two also take a sample
or offset source.
We then introduce a new load_interpolated_input intrinsic, which
is like a normal load_input intrinsic, but with an additional
barycentric coordinate source.
The intention is that flat inputs will still use regular load_input
intrinsics. This makes them distinguishable from normal inputs that
need fancy interpolation, while also providing all the necessary data.
This nicely unifies regular inputs and interpolateAt functions.
Qualifiers and variables become irrelevant; there are just
load_barycentric intrinsics that determine the interpolation.
v2: Document the interp_mode const_index value, define a new
BARYCENTRIC() helper rather than using SYSTEM_VALUE() for
some of them (requested by Jason Ekstrand).
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Chris Forbes <chrisforbes@google.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Likewise, rename the enum type to glsl_interp_mode.
Beyond the GLSL front-end, talking about "interpolation modes" seems
more natural than "interpolation qualifiers" - in the IR, we're removed
from how exactly the source language specifies how to interpolate an
input. Also, SPIR-V calls these "decorations" rather than "qualifiers".
Generated by:
$ find . -regextype egrep -regex '.*\.(c|cpp|h)' -type f -exec sed -i \
-e 's/INTERP_QUALIFIER_/INTERP_MODE_/g' \
-e 's/glsl_interp_qualifier/glsl_interp_mode/g' {} \;
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Acked-by: Dave Airlie <airlied@redhat.com>
This will be used to select the plane to sample from for planar
textures.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>