So far only LAVA jobs make use of it, but I guess baremetal could be
extended to have these timeouts as well.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Emma Anholt <emma@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13441>
(cherry picked from commit 83a0bb007f)
We can use the general "how parallel should we go on this runner?" env var
and save a bunch of massaging env var names. Fixes how PIGLIT_PARALLEL
looked like it was useful but actually wasn't passed through to HW
runners.
Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13372>
(cherry picked from commit 9ddfd297e0)
* Refactor timeouts and retry attempts constants to variables in the top
of the python script.
* Increase LAVA job timeout value from 1 minute to 5 minutes, since the
timeout detection is just a heuristic based on the log silence in LAVA
devices. If we keep 1 minute timeout, maybe we could cancel jobs that
have tasks which may take too long to respond. Also, one minute
timeout is prone to misdetect scenarios when some network errors or
slowness may happen.
* Increase polling rate to check if the job has started from 1 check
every 30 seconds to 1 check every 10 seconds. Since it was taking 30
seconds in the worst case to start to get the log output from a LAVA
job. It is important to note that some LAVA jobs take less than 2
minutes to finish, so a 10 second wait would be more suitable in those
cases.
Signed-off-by: Guilherme Gallo <guilherme.gallo@collabora.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12870>
Add a time.sleep call between proxy.scheduler.jobs.logs calls, since
they do not block. This will relieve some request pressure on LAVA
dispatchers.
Signed-off-by: Guilherme Gallo <guilherme.gallo@collabora.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12797>
Enable CI for lima again on meson-gxl-s805x-libretech-ac boards
with Mali-450.
These boards are managed by a LAVA instance and so follow the LAVA CI
workflow in Mesa.
The goal is to have coverage for deqp-gles2, as lima is a GLES2-only
driver.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11789>
Everyone can get artifacts now. Let's make those artifacts useful.
Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12110>
This makes it much easier to use the common init scripts ... which we
also do here.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Acked-by: Martin Peres <martin.peres@mupuf.org>
Acked-by: Emma Anholt <emma@anholt.net>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11337>
Just pass the actual parameter, rather than bare YAML.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Acked-by: Martin Peres <martin.peres@mupuf.org>
Acked-by: Emma Anholt <emma@anholt.net>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11337>
We don't have any fastboot devices in LAVA, and even if we did, the old
overlay path no longer applies.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Acked-by: Martin Peres <martin.peres@mupuf.org>
Acked-by: Emma Anholt <emma@anholt.net>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11337>
Now that our job-execution scripts look very similar for LAVA and
bare-metal, we can just tell LAVA to use the same stage-2 init we use
for bare-metal and delete a bunch of duplication.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Acked-by: Martin Peres <martin.peres@mupuf.org>
Acked-by: Emma Anholt <emma@anholt.net>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11337>
This brings us much closer with what bare-metal does, and also allows us
to upload job data to a local instance rather than the primary fd.o one.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Acked-by: Martin Peres <martin.peres@mupuf.org>
Acked-by: Emma Anholt <emma@anholt.net>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11337>
Should also probably never have been different.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Acked-by: Martin Peres <martin.peres@mupuf.org>
Acked-by: Emma Anholt <emma@anholt.net>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11337>
Why were they ever different ... ?
Signed-off-by: Daniel Stone <daniels@collabora.com>
Acked-by: Martin Peres <martin.peres@mupuf.org>
Acked-by: Emma Anholt <emma@anholt.net>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11337>
One less point of differentiation.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Acked-by: Martin Peres <martin.peres@mupuf.org>
Acked-by: Emma Anholt <emma@anholt.net>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11337>
No reason not to.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Acked-by: Martin Peres <martin.peres@mupuf.org>
Acked-by: Emma Anholt <emma@anholt.net>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11337>
Everything needs them, so might as well set it up front.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Acked-by: Martin Peres <martin.peres@mupuf.org>
Acked-by: Emma Anholt <emma@anholt.net>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11337>
Make both LAVA and bare-metal untar into $CI_PROJECT_DIR/install/, and
symlink /install/ to it during init.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Acked-by: Martin Peres <martin.peres@mupuf.org>
Acked-by: Emma Anholt <emma@anholt.net>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11337>
Make it line up with bare-metal.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Acked-by: Martin Peres <martin.peres@mupuf.org>
Acked-by: Emma Anholt <emma@anholt.net>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11337>
One fewer difference to bare-metal.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Acked-by: Martin Peres <martin.peres@mupuf.org>
Acked-by: Emma Anholt <emma@anholt.net>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11337>
This got lost in the move away from hardcoded environment variables, and
fixes the Iris EGL tests.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Acked-by: Martin Peres <martin.peres@mupuf.org>
Acked-by: Emma Anholt <emma@anholt.net>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11337>
This should probably be set in the trace-job environments, but the
inheritance is a bit of a mess between all the systems at the moment,
and this matches previous hardcoded behaviour at least.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Acked-by: Martin Peres <martin.peres@mupuf.org>
Acked-by: Emma Anholt <emma@anholt.net>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11337>
The screensaver kicks in at 10 minutes and obscures the screen,
independent of dpms. This causes piglit tests to get flaky (swaps start
taking a whole second, and swapbuffersmsc-divisor-zero times out at
exactly the wrong time) and slow if the run takes longer than 10 minutes.
Hopefully with this we'll see some piglit glx flakes go away forever, it
did seem to for this test locally.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11334>
I was today years old when I learned this about classic composable UNIX
tools:
~/mesa/mesa lava-submitter-overlay * % bash
[daniels@strictly mesa]$ set -e
[daniels@strictly mesa]$ false | tee
[daniels@strictly mesa]$ echo $?
0
Use tail rather than tee, so it doesn't hide our exit status.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11309>
Frequency of writes is unlikely to be a performance bottleneck, and
given the number of steps in between execution and the user, less
buffering is gooder.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11309>
Truth is relative in 2021, and Python's duck-typing means truthiness
isn't what you think it is. Use an explicit fatal-error handler to make
sure we crash out hard on failure, rather than hoping sys.exit() behaves
like you think it does, because it doesn't.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11309>
Trying to get arbitrary strings suitably quoted for shell, embedded in a
YAML file, processed by Python templating, is like seven bad ideas all
embedded into one big can of bees.
Reuse the same script we use for bare-metal to generate the environment,
tar that up into a per-job overlay which is added to the
inter-pipeline-reusable rootfs built by the container jobs and the
intra-pipeline-reusable overlay built by the build jobs.
@anholt wrote a chunk of this - replacing the $ENV_VARS GitLab CI
variable with a Python loop across the POSIX job environment - in
!11192, but this still had YAML quoting nightmares, and was more
needless duplication between LAVA and bare-metal.
The diff is large and annoying, but is mostly a sed job to get
ENV_VARS="FOO=bar BAZ=quux" into FOO: bar\nBAZ: quux.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Co-authored-by: Emma Anholt <emma@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11309>
Used for both LAVA (uploading results to MinIO because we don't yet have
non-ephemeral NFS storage) and Piglit (for the Tracie dashboard).
Signed-off-by: Daniel Stone <daniels@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11309>
Our variable names haven't aged very well. Rename them to make them more
clear and straightforward, especially when we bring in a third rootfs
element to download.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11309>
Split our init up into: base system setup (filesystem mounts, network),
pulling the build artifacts, environment common to us and bare-metal,
bespoke environment, and finally running the tests.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11309>
As the JWT is sensitive, we don't want to record or leak it anywhere.
Doing this lets us run --dump-yaml in normal execution so we can
artifact the result, as well as bringing us into line with bare-metal.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11309>