DRI_IMAGE's createImageFromTexture is used to implement the extension,
so we should check for it prior to advertising.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Drop the (duplicate) top-level check in dri2_create_image_khr() and add
the respective checks in dri2_create_image_khr_{texture,renderbuffer}
v2: use unreachable instead of assert in dri2_create_image_khr_texture
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
If no modifiers are available, the variable will never be used. Thus
there's no point in initialising it.
Cc: Varad Gautam <varad.gautam@collabora.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
If the respective extension is not supported, one should return
EGL_BAD_PARAMETER as mentioned in earlier commits.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Although not listed amongst the initial EGL_LINUX_DRM_FOURCC_EXT and
friends list, the spec reads
... Required attributes and their values are as
follows:
* EGL_WIDTH & EGL_HEIGHT: The logical dimensions of the buffer in pixels
* EGL_LINUX_DRM_FOURCC_EXT: The pixel format of the buffer, as specified
by drm_fourcc.h and used as the pixel_format parameter of the
drm_mode_fb_cmd2 ioctl.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Simplify the existing if/else + temporary variable into if (foo) return
X.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Move the common extension check at the top.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Will allow us to simplify existing code and make further improvements
short and simple.
No functional change intended.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
As per EGL_KHR_image_base:
If an attribute specified in <attrib_list> is not one of the
attributes listed in Table bbb, the error EGL_BAD_PARAMETER is
generated.
We should set the error as opposed to simply log it.
Currently we have a partial solution, whereby only some of the callers
call _eglError().
Since that has proven to be less robust, simply set the error by the
function itself and change the return type to EGLBoolean, updating the
callers.
So now the code is slightly simpler. Plus the follow-up fixes will be
easier to manage.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Don't bother allocating any memory until we're finished parsing and
sanitising all the attributes.
As a nice side effect we now consistently set eglError when any of
the attrib/values are not correct.
Strangely enough the spec does not mention _anything_ about what error
should be set where, even if the implementation already sets the odd
one.
Cc: Kristian Høgsberg <krh@bitplanet.net>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
If dri2_setup_extensions() fails, the "err" variable would not be assigned
causing the error path to access an unitialized variable. Fix it by
assigning an error message.
Fixes: 2c341f2bda ("egl: refactor dri2_create_screen() into three separate functions")
Signed-off-by: Tomasz Figa <tfiga@chromium.org>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Instead of having special driver loading logic for Android, create
symlinks to gallium_dri.so so we can use the standard loading logic.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Rob Herring <robh@kernel.org>
In swrastGetDrawableInfo, set *x and *y, not just *w and *h;
this fixes a crash later in drisw_update_tex_buffer when the
(formerly) uninitialized x and y values are used to construct
an address in a call to llvmpipe_transfer_map.
Fixes crash in Piglit test
"spec@egl 1.4@eglcreatepbuffersurface and then glclear"
(<piglit dir>/bin/egl-create-pbuffer-surface -auto)
that occurred intermittently, e.g. when the uninitialized x and y in
drisw_update_tex_buffer just happened to contain absurd non-zero values.
v2: Initialize in case if function succeeds or fails, just like *w/*h.
Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Ben Crocker <bcrocker@redhat.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
The function _eglError() already explicitly returns EGL_FALSE,
explicitly to simplify the callers. Make use of it.
While EGL_FALSE is numerically identical to false, NULL, EGL_NO_FOO,
storage is not the same so we cannot use it for "everything".
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Function cannot fail and always returns true.
v2: Inline the one line function in the header
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Rename 'count' to 'config_count'. I didn't understand what the variable
did until I untangled the for-loops. Now the next person won't have that
problem.
v2: Rebase. Fix typo. Apply to all platforms (for emil).
Reviewed-by: Eric Engestrom <eric@engestrom.ch> (v1)
No behavioral change. Just a readability cleanup.
Instead of modifying this small array on each loop iteration, we now
initialize it in-place with the values it needs.
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
No behavioral change. Just a readability cleanup.
Instead of modifying this small array on each loop iteration, we now
initialize it in-place with the values it needs.
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
No behavioral change. Just a readability cleanup.
Instead of modifying this small array on each loop iteration, we now
initialize it in-place with the values it needs.
v2: Rebase.
Reviewed-by: Eric Engestrom <eric@engestrom.ch> (v1)
That is, consistently do this:
for (int i = 0; ...)
No behavioral change.
This patch touches only egl_dri2.c.
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
dri2_conf represents another config (which shouldn't be counted)
if it doesn't have the requested ID.
Reported-by: Liu Zhiquan <zhiquan.liu@intel.com>
Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Cc: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Many Android apps (such as Google's official NDK GLES2 example app), and
even portions the core framework code (such as SystemServiceManager in
Nougat), incorrectly choose their EGLConfig. They neglect to match the
EGLConfig's EGL_NATIVE_VISUAL_ID against the window's native format, and
instead choose the first EGLConfig whose channel sizes match those of
the native window format while ignoring the channel *ordering*.
We can detect such buggy clients in logcat when they call
eglCreateSurface, by detecting the mismatch between the EGLConfig's
format and the window's format.
As a workaround, this patch changes the order of EGLConfig generation
such that all EGLConfigs for HAL pixel format i precede those for HAL
pixel format i+1. In my (chadversary) testing on Android Nougat, this
was good enough to pacify the buggy clients.
v2: Rebase to make patch cherry-pickable to stable.
Cc: mesa-stable@lists.freedesktop.org
Cc: Tomasz Figa <tfiga@chromium.org>
Cc: Rob Herring <robh@kernel.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
In the same spirit as 858f2f2ae6 (egl/dri2: ease srgb __DRIconfig
conditionals), let's merge dri_single_config and dri_double_config into
a single dri_config[2].
This moves the `if (double) dri_double_config else dri_single_config`
logic to `dri_config[double]`, reducing code duplication and making it
easier to read.
Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Same as the previous commit, but this one was split out because it's
a bit more complicated: this field is given as a pointer to a function,
so the function had to be changed as well, and the function was use in
a bunch of places, which needed updating as well.
Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Imagine there are 2 threads that both call _eglGetNativePlatform()
simultaneously:
- thread 1 completes the first "if (native_platform ==
_EGL_INVALID_PLATFORM)" check and is preempted to do something else
- thread 2 executes the whole function, does "native_platform =
_EGL_NATIVE_PLATFORM" and just before returning it's preempted
- thread 1 wakes up and calls _eglGetNativePlatformFromEnv() which
returns _EGL_INVALID_PLATFORM because no env vars are set, updates
native_platform and then gets preempted again
- thread 2 wakes up and returns wrong _EGL_INVALID_PLATFORM
Solve this by doing the detection in a local var and only overwriting
the global one at the end, if no other thread has updated it since.
This means the platform detected in the thread might not be the platform
returned by the function, but this is a different issue that will need
to be discussed when this becomes possible.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101252
Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Grazvydas Ignotas <notasas@gmail.com>
Acked-by: Emil Velikov <emil.l.velikov@gmail.com>
My refactor missed the fact that `native_platform` is static.
Add the proper guard around the detection code, as it might not be
necessary, and only print the debug message when a detection was
actually performed.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101252
Fixes: 7adb9b0948 ("egl/display: remove unnecessary code and
make it easier to read")
Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Grazvydas Ignotas <notasas@gmail.com>
Acked-by: Emil Velikov <emil.l.velikov@gmail.com>
KHR/khrplatform.h is required by the EGL, GLES and VG headers, but is
only installed if Mesa3d is compiled with EGL support.
This patch installs this header file unconditionally.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=77240
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Let's (try to) set damages before swapping buffers.
Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
This patch adds support for the EGL_KHR_partial_update extension for
android platform. It passes 36/37 tests in dEQP for EGL_KHR_partial_update.
1 test not supported.
v2: add fallback for eglSetDamageRegionKHR (Tapani)
v3: The native_window_set_surface_damage call is available only from
Android version 6.0. Reintroduce the ANDROID_VERSION guard and
advertise extension only if version is >= 6.0. (Emil Velikov)
v4: use newly introduced ANDROID_API_LEVEL guard rather than
ANDROID_VERSION guard to advertise the extension.The extension
is advertised only if ANDROID_API_LEVEL >= 23 (Android 6.0 or
greater). Add fallback function for platforms other than Android.
Fix possible math overflow. (Emil Velikov)
Return immediately when n_rects is 0. Place function's entrypoint
in alphabetical order. (Eric Engestrom)
v5: Replace unnecessary calloc with malloc (Eric)
Check for BAD_ALLOC error (Emil)
Check for error in native_window_set_damage_region. (Emil, Tapani,
Eric).
Signed-off-by: Harish Krupo <harish.krupo.kps@intel.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Specification states that in case of error, value should not be
written, patch changes buffer age queries to return -1 in case of
error so that we can skip changing the value.
In addition, small change to droid_query_buffer_age to return 0
in case buffer does not have a back buffer available.
Fixes:
dEQP-EGL.functional.negative_partial_update.not_postable_surface
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Chad Versace <chadversary@chromium.org>
Cc: mesa-stable@lists.freedesktop.org
Since the EGL attributes are signed integers, a straight OR would
also perform sign extension,
Fixes: 6f10e7c37a ("egl/dri2: Create EGLImages with dmabuf modifiers")
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
In all codepaths, this var ends up assigned to the struct, except one:
a cleanup codepath, where the `close()` was removed, leading to fd leaks.
Remove the temp fd and assign to the struct field directly instead.
CovID: 1213930
Fixes: 7ec07beedf ("egl/drm: make use of the
dri2_display_destroy() helper")
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>
v2: check for DRIimageExtension version 15 (Jason Ekstrand)
Signed-off-by: Varad Gautam <varad.gautam@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
query and return supported dmabuf format modifiers for
EGL_EXT_image_dma_buf_import_modifiers.
v2: move format check to the driver instead of making format queries
here and then checking.
v3: Check DRIimageExtension version before query (Daniel Stone)
v4:
- move to DRIimageExtension version 15, check queryDmaBufModifiers before
calling (Jason Ekstrand)
- pass external_only to the driver instead of setting as EGL_TRUE here
(Emil Velikov, Daniel Stone)
Signed-off-by: Varad Gautam <varad.gautam@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
allow egl clients to query the dmabuf formats supported on this platform.
v2: return EGLBoolean.
v3: Check DRIimageExtension version before querying (Daniel Stone).
v4: move to DRIimageExtension version 15, error checking (Jason Ekstrand).
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Signed-off-by: Varad Gautam <varad.gautam@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Allow creating EGLImages with dmabuf format modifiers when target is
EGL_LINUX_DMA_BUF_EXT for EGL_EXT_image_dma_buf_import_modifiers.
v2:
- clear modifier assembling and error label name (Eric Engestrom)
v3:
- remove goto jumps within switch-case (Emil Velikov)
- treat zero as valid modifier (Daniel Stone)
- ensure same modifier across all dmabuf planes (Emil Velikov)
v4:
- allow modifiers to add extra planes (Louis-Francis Ratté-Boulianne)
v5:
- fix error checking, some cleanups (Jason Ekstrand)
- pass single copy of the modifier to createImageFromDmaBufs2
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Signed-off-by: Varad Gautam <varad.gautam@collabora.com>
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
The EGL_EXT_dma_buf_import_modifiers extension adds support for a
fourth plane, just like DRM KMS API does.
Bump maximum dma_buf plane count to four.
v2: prevent attribute tokens from being parsed if
EXT_image_dma_buf_import_modifiers is not suported. (Emil Velikov)
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Signed-off-by: Varad Gautam <varad.gautam@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Rather than hardcoding 3, use a #define. Makes it easier to bump this
later to 4.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Signed-off-by: Varad Gautam <varad.gautam@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
v2:
bump version
v3:
Add code comment
s/IsGlThread/IsThread/ (and variation)
Include X11/Xlibint.h protected by ifdef
v5: based on Daniel feedback
Move non X11 code outside of X11 define
Always return true for Wayland
Signed-off-by: Gregory Hainaut <gregory.hainaut@gmail.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Analogous to earlier commits - image_driver and image_loader are meant
to be used hand in hand.
v2: Rebase
Cc: Derek Foreman <derekf@osg.samsung.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Strictly speaking __DRI_DRI2 implies __DRI2_FLUSH. Although since we're
using the latter in the callback, we want to use the correct guard.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Emil Velikov
Emil Velikov
Tomasz Figa
Rob Herring
Ben Crocker
Chad Versace
Eric Engestrom
Eric Engestrom
Robert Foss
Eric Le Bihan
Harish Krupo
Tapani Pälli
Daniel Stone
Varad Gautam
Pekka Paalanen
Gregory Hainaut