When available, use the zwp_linux_dambuf_v1 interface to create buffers,
which allows multiple planes and buffer modifiers to be used.
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
This accidentally set __DRI_CTX_FLAG_NO_ERROR whenever any flags were
present. Just needs extra parenthesis.
Fixes: 4909519a66 (egl: Add EGL_KHR_create_context_no_error support)
Reviewed-by: Grigori Goronzy <greg@chown.ath.cx>
Tested-by: Mark Janes <mark.a.janes@intel.com>
This only adds the EGL side, needs to be plumbed into Mesa frontend.
v2: Add check for extension availability.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
DRI_IMAGE's createImageFromTexture is used to implement the extension,
so we should check for it prior to advertising.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Drop the (duplicate) top-level check in dri2_create_image_khr() and add
the respective checks in dri2_create_image_khr_{texture,renderbuffer}
v2: use unreachable instead of assert in dri2_create_image_khr_texture
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
If no modifiers are available, the variable will never be used. Thus
there's no point in initialising it.
Cc: Varad Gautam <varad.gautam@collabora.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
As per EGL_KHR_image_base:
If an attribute specified in <attrib_list> is not one of the
attributes listed in Table bbb, the error EGL_BAD_PARAMETER is
generated.
We should set the error as opposed to simply log it.
Currently we have a partial solution, whereby only some of the callers
call _eglError().
Since that has proven to be less robust, simply set the error by the
function itself and change the return type to EGLBoolean, updating the
callers.
So now the code is slightly simpler. Plus the follow-up fixes will be
easier to manage.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Don't bother allocating any memory until we're finished parsing and
sanitising all the attributes.
As a nice side effect we now consistently set eglError when any of
the attrib/values are not correct.
Strangely enough the spec does not mention _anything_ about what error
should be set where, even if the implementation already sets the odd
one.
Cc: Kristian Høgsberg <krh@bitplanet.net>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Instead of having special driver loading logic for Android, create
symlinks to gallium_dri.so so we can use the standard loading logic.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Rob Herring <robh@kernel.org>
The function _eglError() already explicitly returns EGL_FALSE,
explicitly to simplify the callers. Make use of it.
While EGL_FALSE is numerically identical to false, NULL, EGL_NO_FOO,
storage is not the same so we cannot use it for "everything".
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Function cannot fail and always returns true.
v2: Inline the one line function in the header
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
That is, consistently do this:
for (int i = 0; ...)
No behavioral change.
This patch touches only egl_dri2.c.
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
In the same spirit as 858f2f2ae6 (egl/dri2: ease srgb __DRIconfig
conditionals), let's merge dri_single_config and dri_double_config into
a single dri_config[2].
This moves the `if (double) dri_double_config else dri_single_config`
logic to `dri_config[double]`, reducing code duplication and making it
easier to read.
Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
This patch adds support for the EGL_KHR_partial_update extension for
android platform. It passes 36/37 tests in dEQP for EGL_KHR_partial_update.
1 test not supported.
v2: add fallback for eglSetDamageRegionKHR (Tapani)
v3: The native_window_set_surface_damage call is available only from
Android version 6.0. Reintroduce the ANDROID_VERSION guard and
advertise extension only if version is >= 6.0. (Emil Velikov)
v4: use newly introduced ANDROID_API_LEVEL guard rather than
ANDROID_VERSION guard to advertise the extension.The extension
is advertised only if ANDROID_API_LEVEL >= 23 (Android 6.0 or
greater). Add fallback function for platforms other than Android.
Fix possible math overflow. (Emil Velikov)
Return immediately when n_rects is 0. Place function's entrypoint
in alphabetical order. (Eric Engestrom)
v5: Replace unnecessary calloc with malloc (Eric)
Check for BAD_ALLOC error (Emil)
Check for error in native_window_set_damage_region. (Emil, Tapani,
Eric).
Signed-off-by: Harish Krupo <harish.krupo.kps@intel.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Since the EGL attributes are signed integers, a straight OR would
also perform sign extension,
Fixes: 6f10e7c37a ("egl/dri2: Create EGLImages with dmabuf modifiers")
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
v2: check for DRIimageExtension version 15 (Jason Ekstrand)
Signed-off-by: Varad Gautam <varad.gautam@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
query and return supported dmabuf format modifiers for
EGL_EXT_image_dma_buf_import_modifiers.
v2: move format check to the driver instead of making format queries
here and then checking.
v3: Check DRIimageExtension version before query (Daniel Stone)
v4:
- move to DRIimageExtension version 15, check queryDmaBufModifiers before
calling (Jason Ekstrand)
- pass external_only to the driver instead of setting as EGL_TRUE here
(Emil Velikov, Daniel Stone)
Signed-off-by: Varad Gautam <varad.gautam@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
allow egl clients to query the dmabuf formats supported on this platform.
v2: return EGLBoolean.
v3: Check DRIimageExtension version before querying (Daniel Stone).
v4: move to DRIimageExtension version 15, error checking (Jason Ekstrand).
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Signed-off-by: Varad Gautam <varad.gautam@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Allow creating EGLImages with dmabuf format modifiers when target is
EGL_LINUX_DMA_BUF_EXT for EGL_EXT_image_dma_buf_import_modifiers.
v2:
- clear modifier assembling and error label name (Eric Engestrom)
v3:
- remove goto jumps within switch-case (Emil Velikov)
- treat zero as valid modifier (Daniel Stone)
- ensure same modifier across all dmabuf planes (Emil Velikov)
v4:
- allow modifiers to add extra planes (Louis-Francis Ratté-Boulianne)
v5:
- fix error checking, some cleanups (Jason Ekstrand)
- pass single copy of the modifier to createImageFromDmaBufs2
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Signed-off-by: Varad Gautam <varad.gautam@collabora.com>
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
The EGL_EXT_dma_buf_import_modifiers extension adds support for a
fourth plane, just like DRM KMS API does.
Bump maximum dma_buf plane count to four.
v2: prevent attribute tokens from being parsed if
EXT_image_dma_buf_import_modifiers is not suported. (Emil Velikov)
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Signed-off-by: Varad Gautam <varad.gautam@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Rather than hardcoding 3, use a #define. Makes it easier to bump this
later to 4.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Signed-off-by: Varad Gautam <varad.gautam@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
v2:
bump version
v3:
Add code comment
s/IsGlThread/IsThread/ (and variation)
Include X11/Xlibint.h protected by ifdef
v5: based on Daniel feedback
Move non X11 code outside of X11 define
Always return true for Wayland
Signed-off-by: Gregory Hainaut <gregory.hainaut@gmail.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Split the create_screen into:
- create screen
- setup/bind extensions
- setup screen
This will allow us to reuse the latter two on egl/drm. Said platform
does create its own screen and attempts to reinvent the later two
functions itself.
Since the GBM ones tend to get out of sync quite often, and there is no
distinct reason why it does so we'll drop them with latter commits.
v2: disp -> dpy for the Android platform.
v3: use correct goto label (Rob)
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Tested-by: Rob Herring <robh@kernel.org>
Within dri2_display_release() we already tear down all the display
specifics. Within the platform specific dri initialize however we badly
and partially duplicate that.
Let's stop that by fleshing out the required functionality into a helper
and using it throughout the codebase.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
Tested-by: Rob Herring <robh@kernel.org>
With later commits we'll split and reuse the destroy side of the
function for the initialize_foo error path.
In such cases, driver_configs may be NULL leading to a crash.
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
[Emil Velikov: reword commit message]
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Tested-by: Rob Herring <robh@kernel.org>
This way we'll get an implicit zero initialization of the remaining
members, as required by dri2_add_config().
Fixes: e5efaeb85c ("egl: polish dri2_to_egl_attribute_map[]")
Cc: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Annotate the array as static const and use C99 initialiser to populate
it.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
This allows eglCreateImageKHR to access P010 surfaces created by vaapi
Signed-off-by: Rainer Hochecker <fernetmenta@online.de>
Acked-by: Ben Widawky <ben@bwidawsk.net>
When EGL is used on some other thread than the thread that drives the
main wl_display queue, the Wayland EGL dri2 implementation is
vulnerable to a race condition related to display round trips and global
object advertisements.
The race that may happen is that after after a proxy is created, but
before the queue is set, events meant to be emitted via the yet to be
set queue may already have been queued on the wrong queue.
In order to make it possible to avoid this race, wayland 1.11
introduced new API that allows creating a proxy wrapper that may be used
as the factory proxy when creating new proxies via Wayland requests. The
queue of a proxy wrapper can be changed without effecting what queue
events emitted by the actual proxy will be queued on, while still
effecting what default queue proxies created from it will have.
By introducing a wl_display proxy wrapper and using this when performing
round trips (via wl_display_sync()) and retrieving the global objects (via
wl_display_get_registry()), the mentioned race condition is avoided.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Daniel Stone <daniels@collabora.com>
With fixes from Chad squashed in, plus fixes for issues that Rafael
found while writing piglit tests.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Tested-by: Rafael Antognolli <rafael.antognolli@intel.com>
Reviewed-by: Chad Versace <chadversary@chromium.org>
Tested-by: Chad Versace <chadversary@chromium.org>
Changes since v1:
- removed not needed includes
- use the loader version of the helper
v2 [Emil Velikov]
- Keep the includes - they are required.
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
This reverts commit 3652d1d594.
Self nack/reject on this one. The base.ConfigID is overwritten
immediately after we store the current value, thus one memcpy [further
down] the wrong value will be copied.
Currently we only saved the id to memcpy the whole _EGLConfig to write
back the exact same id value.
Remove the unneeded and confusing/misleading code.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
While these max values were previously fixed for pbuffer creation, this
change makes also eglGetConfigAttrib() return correct values.
Fixes following dEQP tests:
dEQP-EGL.functional.create_surface.pbuffer.rgb888_no_depth_no_stencil
dEQP-EGL.functional.create_surface.pbuffer.rgb888_depth_stencil
dEQP-EGL.functional.create_surface.pbuffer.rgba8888_no_depth_no_stencil
dEQP-EGL.functional.create_surface.pbuffer.rgba8888_depth_stencil
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98326
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Cc: "12.0 13.0" <mesa-stable@lists.freedesktop.org>
Earlier commit replaced the default platform specific libglapi.so name
with an #error.
This may have been overzealous since the name is the correct for the BSD
platforms, at least. Reinstate the hunk - bringing back OpenBSD, et al.
to a successful build state.
Fixes: 7a9c92d071 ("egl/dri2: non-shared glapi cleanups")
[Emil Velikov: format the patch from Eric, add commit message and tag.]
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Do not loop over all matches if we've already found one.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
v2: dri2_bind_extensions() now takes optional as an argument.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Will allow us to reuse the function for optional extensions and fold a
bit of code.
v2: Make dri2_bind_extensions::optional flag an argument to
dri2_bind_extensions (Kristian).
Cc: Rob Clark <robdclark@gmail.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Consistently indent with space rather than a mix of tab and
spaces.
v2: Keep the structs properly aligned (Eric).
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>