Another manual re-sync with reality.
There are a few extension, notably GL_ARB_texture_compression_bptc,
which are exposed but mesamatrix doesn't show as supported. I can't
really figure out why.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Emma Anholt <emma@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19100>
This reverts commit e749f67f89, which added a CAP
to support drivers that can only do upside-down point coordinates. That was
added specifically for Asahi, since Metal's point coordinate convention is
opposite Mesa's. Since then, additional reverse-engineering aided by the PowerVR
headers led me to the bit doing the flip in hardware, so Asahi does not use the
CAP since baadc1ec13 ("asahi: Don't use lower_wpos_pntc"). Garbage collect it.
[If it's needed for future hardware, we can revive it. But the plan is Vulkan
anyway.]
Signed-off-by: Alyssa Rosenzweig <alyssa@collabora.com>
Suggested-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19078>
All current drivers reports supporting this cap, let's just assume
it's always supported.
It seems better to lower this in the drivers, like we already do for
etnaviv, panfrost and zink...
Reviewed-By: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Begrudgingly-reviewed-by: Alyssa Rosenzweig <alyssa@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19049>
A lot of code zero-initializes pipe_sampler_state, and sets the states
the non-zero fields manually. This means that normalized_coords is the
"default" setting.
However, setting normalized_coords to true isn't allways allowed, and
we'd need to check PIPE_CAP_TEXRECT first. So it's not really the ideal
default here. There's recently been found quite a bit of bugs in this
area, where the state-tracker didn't properly lower texrects.
Let's switch this around to avoid more bugs like this in the future.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/18971>
On my ppc64le machine with 32 hardware threads, this speeds up OpenArena
(1920x1200) from 7.2 fps to 8.1 fps.
Reviewed-by: Emma Anholt <emma@anholt.net>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/18415>
v2:
- added more requirements for LLVM (thanks Mike Lothian (@FireBurn)).
v3:
- note the optional cases for rustfmt (thanks @LingMan)
- remove the part about the SPIR-V target for LLVM (thanks Karol Herbst
(@karolherbst))
v4:
- added minimum version requirements (thanks Karol Herbst
(@karolherbst))
Signed-off-by: Kai Wasserbäch <kai@dev.carbon-project.org>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/18640>
This is now done for all drivers that supports half-float and sRGB
textures. Update features.txt to reflect this.
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/18574>
This extension adds new NONE attachment load / store operations,
which are identical to the DONT_CARE variants with the difference
that DONT_CARE doesn't ensure that the original contents of the
memory within the render area are preserved and these new versions
do (with some caveats).
Our implementation was not destroying data with DONT_CARE anyway
so we already support the new semantics. Our implementation is
such that we don't need to do anything specific with the new
operations and the current behavior will do what is expected.
We pass all the tests under:
dEQP-VK.renderpass*.load_store_op_none.*
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/18570>
This is a trivial implementation where we just insert a UBO descriptor
pointing to the actual data and then treat it as a normal UBO everywhere
else. In theory an indirect CP_LOAD_STATE would be more efficient than
ldc.k to preload inline uniform blocks to constants. However we will
always need the UBO descriptor anyway, even if we lower the limits
enough to always be able to preload them, because with variable pointers
we may have a pointer that could be to either an inline uniform block or
regular uniform block. So, using an indirect CP_LOAD_STATE should be an
optimization on top of this.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17960>
OpenGL 3.0 requires RGTC support, and until we have emulation in place,
we should document that requirement.
Fixes: d50e8554b9 ("zink: add feature-documentation")
Acked-by: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/18549>
The hw supports restarts of list primmitives and we pass
all the relevant CTS tests.
We don't advertise patch list restarts because we don't support
tessellation shaders yet.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/18544>
For those drivers that don't make full use of the 64 bits in
pipe_query_result.u64.
Applications will make use of it via GL_QUERY_COUNTER_BITS to handle
when the value rolls over.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-By: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Reviewed-by: Emma Anholt <emma@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10770>
We don't have any special requirements for this, so we can just expose
the extension.
The tests in CTS have an issue where they only check if a format is
supported for sampling but don't check if an image with that format
can be created for sampling. In our case, since we can't sample
1D depth/stencil images, this causes affected tests to crash in the
simulator (they pass on the device though). There is an issue with
a fix here:
https://gitlab.khronos.org/Tracker/vk-gl-cts/-/issues/3923
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/18489>
Implement natively by always returning invalid feedback. This is a legal
(but useless) implementation according to the spec.
In the future, I want to return the real feedback values from the host,
but that requires changes to the venus protocol. The protocol does not
know that the VkPipelineCreationFeedback structs in the
VkGraphicsPipelineCreateInfo pNext are output parameters. Before
VK_EXT_pipeline_creation_feedback, the pNext chain was input-only.
Tested with `dEQP-VK.pipeline.*.creation_feedback.*`.
The tests in vulkan-cts-1.3.3.0 are buggy. I submitted a fix to dEQP
upstream; see below.
Results with the bug:
Passed: 0/30 ( 0.0%)
Failed: 12/30 (40.0%)
Not supported: 18/30 (60.0%)
Warnings: 0/30 ( 0.0%)
Results with bugfix:
Passed: 12/30 (40.0%)
Failed: 0/30 ( 0.0%)
Not supported: 18/30 (60.0%)
Warnings: 0/30 ( 0.0%)
See: https://gerrit.khronos.org/c/vk-gl-cts/+/10086
See: https://gitlab.freedesktop.org/virgl/virglrenderer/-/merge_requests/909
Reviewed-by: Yiwei Zhang <zzyiwei@chromium.org>
Signed-off-by: Chad Versace <chadversary@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/18035>
We now have lowering-code in the mesa state-tracker, meaning we no
longer need this feature.
Fixes: e4ff42684b ("mesa/st: enable bptc extension with fallback")
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Acked-by: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/18434>
LLVM 16 requires this since [0] and instead of just going all over the
various directories and adding overrides it should be easier to just
raise this globally. GCC supports C++17 since GCC 8 (2018), Clang since
version 5 (2017). Debian Buster (oldstable) has GCC 8.3 and Clang 7.0,
so all major distributions should have this and there shouldn't be an
issue with bumping.
[0] <b4e9977fc1>
Closes: <https://gitlab.freedesktop.org/mesa/mesa/-/issues/7031>
Signed-off-by: Kai Wasserbäch <kai@dev.carbon-project.org>
Reviewed-by: Jesse Natalie <jenatali@microsoft.com>
Reviewed-by: David Heidelberg <david.heidelberg@collabora.com>
Reviewed-by: Ganesh Belgur Ramachandra <ganesh.belgurramachandra@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17966>
We have fine NIR lowering for this (already called from mesa/st), no need
for a separate GLSL pass.
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/18361>
It is just a renamed VK_ARM_rasterization_order_attachment_access.
Zink depends on it to expose KHR_blend_equation_advanced_coherent
Passes GL tests via Zink:
dEQP-GLES31.functional.blend_equation_advanced.*
KHR-GLES31.core.blend_equation_advanced.*
Signed-off-by: Danylo Piliaiev <dpiliaiev@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/18420>
There are many subtleties to laying out twiddled images on AGX. Document
the known ones in a central place. Many of the hairy details of
twiddling were discovered by Asahi Lina and Dougall Johnson, many thanks
to them.
Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/18167>
Every driver uses the nir_lower_system_values path now.
Reviewed-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/18327>
Implement it locally with the common implementation.
Signed-off-by: Chad Versace <chadversary@chromium.org>
Reviewed-by: Yiwei Zhang <zzyiwei@chromium.org>
Reviewed-by: Ryan Neph <ryanneph@google.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/18000>
The patch looks asymmetic because the extension was promoted to 1.3 but
not its feature struct.
Signed-off-by: Chad Versace <chadversary@chromium.org>
Reviewed-by: Yiwei Zhang <zzyiwei@chromium.org>
Reviewed-by: Ryan Neph <ryanneph@google.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/18000>
This extension has no Vulkan API, only SPIR-V API.
Signed-off-by: Chad Versace <chadversary@chromium.org>
Reviewed-by: Yiwei Zhang <zzyiwei@chromium.org>
Reviewed-by: Ryan Neph <ryanneph@google.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/18000>
when compute shaders can be precompiled, they can be precompiled asynchronously
which allows the implementation of the parallel shader compile hooks
Reviewed-by: Dave Airlie <airlied@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/18197>
The extension disrupts assumptions in venus. It gives
vkCreateFooPipelines an additional success code,
VK_PIPELINE_COMPILE_REQUIRED, which allows some pipelines to succeed
creation and others fail.
Tested with 'dEQP-VK.*cache_control*' at vulkan-cts-1.3.3.1.
pass/fail/skip/warn = 15/0/0/3
Warnings were from long pipeline compiles on a full debug build in host
and guest.
See: https://gitlab.freedesktop.org/virgl/virglrenderer/-/merge_requests/890
Signed-off-by: Chad Versace <chadversary@chromium.org>
Reviewed-by: Yiwei Zhang <zzyiwei@chromium.org>
Reviewed-by: Ryan Neph <ryanneph@google.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17847>
This experimental and very suboptimal implementation of graphics
pipeline library shouldn't be used by anyone, except for development
purposes. It's still under active development from my side. This
extension is only exposed via RADV_PERFTEST=gpl anyways.
It's very suboptimal because RADV doesn't yet support PS epilogs and
VS prologs need to be improved/reworked because GPL changed the logic
(eg. can't know the next stage when compiling a prolog). So, currently
the driver ALWAYS retains NIR shaders during libs creation and it links
and compiles in the final pipeline.
I have WIP branches for approximately everything but it looks simpler
to start merging an initial implementation in order to improve steps
by steps from main. This commit might look simple and short but I
already merged TON of preliminary work. RADV was definitely not ready
for GPL and it's still not completely fine. Expect refactoring again.
This implementation currently pass
dEQP-VK.pipeline.pipeline_library.* on NAVI21, except few feedback
creation tests due to CTS bugs.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-By: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17542>
it's been long enough, and there's no technical reason why drivers
shouldn't have this implemented
ZINK_DESCRIPTORS environment variable is preserved for future use
Reviewed-by: Dave Airlie <airlied@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/18065>
Newcomers may want to test traces locally and understand how the replay
works.
Acked-by: Guilherme Gallo <guilherme.gallo@collabora.com>
Signed-off-by: David Heidelberg <david.heidelberg@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17347>
Varying interpolation is quite involved in the hardware. Now that I
understand how it works, add some documentation. This documentation is
too long and uses too much fancy formatting to put inline with the XML,
so put in our external documentation space.
Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17198>
This extension introduces a new layout which allows applications
to both render and sample from the same image inside the same draw
(aka. feedback loops).
Previously, the GENERAL layout was used and this introduced some
rendering artifacts because the hw can't read&write DCC/HTILE for
the same image, and we try to keep it compressed on GFX10+.
This helps fixing corruption with D3D9 and RPCS3 games which
are candidate for feedback loops.
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/4411
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17883>
Karol Herbst
Dylan Baker
Rob Clark
Erik Faye-Lund
Yonggang Luo
Alyssa Rosenzweig
Lionel Landwerlin
Jeremy Rand
Yiwei Zhang
Eric Engestrom
Mike Blumenkrantz
LingMan
Iago Toral Quiroga
Danylo Piliaiev
Dave Airlie
Kai Wasserbäch
Hans-Kristian Arntzen
Connor Abbott
Chia-I Wu
Rajnesh Kanwal
Georg Lehmann
Alyssa Rosenzweig
Tomeu Vizoso
Chad Versace
Mark Collins
Eric Engestrom
Emma Anholt
Jason Ekstrand
Friedrich Vock
Ming Li
Lucas Stach
Konrad Kleine
Samuel Pitoiset
Rhys Perry
David Heidelberg
Pierre-Eric Pelloux-Prayer