LLVM is moving to the 13 release, but LLVM-SPIRV is still so in the past.
Given that LLVM 12.0.0 is still not out (we are at 12.0.0-rc1 today),
use the `release/12.x` branch for LLVM.
We should also tag LLVM-SPIRV, but... it seems that they haven't caught up
yet, so keep using the master branch, but add a note for a future
committer.
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8740>
The new registry caching in place for registry.fd.o can not handle layers
bigger than 5 GB. The last layer we used to build on windows was 5.2 GB,
meaning that the upload would fail.
Split the layers by calling multiple `RUN`, hoping that the size will be
roughly split between those steps if we have a special layer for VS2019.
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8740>
https://gitlab.freedesktop.org/mesa/mesa/-/jobs/6898838 failed at
uploading the containers but got kicked out right before being able to
give us a valid error.
Bump the timeout for windows container builds, to not have this
unfortunate situation.
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8740>
The dr_mode hack is now folded into the git tree. The uprev brings in a
shrinker fix for msm and a fix for the GPU_SET OOB messages on cheza
(possibly involved in piglit flakes).
Reviewed-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8768>
We haven't been able to stabilize the remaining flakes (scattered through
a bunch of innocuous-looking tests), so disable it until we can fix it or
replace the piglit runner with one that can handle flakes.
Closes: #4170
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8747>
This adds a couple of jobs to execute piglit testsuite in VC4
(quick_shader and quick_gl profiles).
It is defined as a manual test as it takes time to execute them.
v2:
- Add more excluded tests (Eric)
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Acked-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8702>
It fits better with what other drivers has done.
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Acked-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8702>
This should help us avoid landing memory leaks (and some buffer overflows)
throughout the GL stack. I put the asan lib in x86_test-base because
we'll want asan for lavapipe, too.
This requires keeping debug symbols for the asan drivers in the artifacts,
as otherwise you can't do much with the backtraces it produces.
Closes: #3726
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8530>
This one test seems to be destroying the world, and causing massive
flakeyness, and is generally more a recovery/GMU stress test than
anything.
See #4159
Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8659>
Replace the expect-based script to turn on/off the Raspberry Pi devices
using a python-based script.
v2:
- Fix small nitpicks (Juan)
- Limit line length (Andres)
v3:
- Bump image tags (Eric, Andres)
v4:
- Bump image tags (Eric)
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Acked-by: Andres Gomez <agomez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8362>
Disabling process isolation causes a random set of tests to be
spuriously skipped. The set of skipped tests can change when piglit is
rebuilt (even from the same Git commit), which can make docker image
rebuilds painful. (Not to mention the reduced testing coverage due to
the skipped tests)
One downside of this change is that the arm64_a630_piglit_shader job
now takes almost 10 minutes.
v2:
* Change arm64_a530_piglit_shader job as well, but make it run manually
on branches of forked repositories only, since it takes almost 20
minutes now. (Eric Anholt)
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8611>
Pulls in test fixes for rasterpos on softpipe and for
simple-barrier-atomics on freedreno. Note that many xfail-vs-xskips end
up changing, because apparently the
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8499>
This is mostly to get additional -Werror coverage to avoid introducing
unforced ILP32 or big-endian errors. i386 adds lavapipe, r600, nouveau,
zink, and all the classic drivers. ppc64le adds lavapipe and zink, and
also adds -Werror for symmetry with the other cross builds. s390x also
adds lavapipe and zink.
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8394>
These bring a whole lot of new coverage to these drivers, since dEQP is
bad at desktop GL feature coverage around early GL 3.x. piglit also gets
at a lot of MSAA, fast clearing, and texture layout issues that dEQP
doesn't do much with.
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7370>
I've set it up in the gitlab-runer config on all the freedreno boards.
This means that for piglit, where the run.sh always choose either this
variable or 4 threads otherwise, we'll have the right number of parallel
tasks.
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7370>
The .baremetal_test sets DEQP_PARALLEL: 0 (number of CPUs), so existing
DEQP tasks should already be auto-configured. This means we can drop
a530's single-threaded overrides, since it's non-SMP.
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7370>
ARM64 had it for traces only, upgrade it to a full build so we can test
a630. We also add it for armhf, as we'll want it on both rpi and etnaviv.
Bumped the LAVA tag as well, since the script changes a bit and it does
impact the final image (even if we aren't pulling in full piglit there
yet). Note I also had to drop the "v" on the tarring of their rootfs, as
the verbosity on baremetal was exceeding job log size.
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7370>
We have been advertising 3.1, which waffle has issues creating contexts
for, causing coverage (and performance!) issues in piglit. We should
support all the necessary features already.
Some new failures are caught by the 3.2 CTS, but they look like they're
existing issues simply not covered by the minimal GL 3.0 CTS.
Fixes: #3037
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8255>
It's been regressed a couple of times recently, so let's try to make sure
it doesn't happen again. The setup here is mostly like llvmpipe-quick-gl,
but using quick_gl+quick_shader together, and a few more spectacularly
long-running tests dropped. I also excluded a bunch of unsupported
extensions, to minimize the size of the skip list checked into the tree
(it's still 200k, though).
The unfortunate exclusions in here are fp64 and int64 -- most of the
piglit tests for them don't run because softpipe is still GL3.3, and it's
an egregious number of skips to add to the checked in list.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8068>
I moved QPA-to-XML conversion to the runner, so Mesa CI (and developers!)
don't need to do quite so much in bash. I also made it clean up caselist
.qpa files since nobody ever wants them and we deleted them anyway. This
cleans up a ton of the job log output.
Additionally, I added a subcommend to turn the .csv into a junit output
that we can expose to gitlab. Now, the pipeline's status page will report
the failed testcases, and the "detail" button will give you a link to the
.XML to view for the failure. (We don't report all testcases because it's
too much load for the gitlab server). Note that this will 404 for the
LAVA runners for now, as they don't retain artifacts in gitlab (the plan
is to eventually have them minio upload the artifacts).
This uprev also includes a deqp output parsing fix, resulting in us
catching a couple more failures in some drivers.
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8206>
v2:
- Squashed the commit to remove tracie jobs (Eric).
v3:
- Rename *-piglit-traces jobs with *-traces (Eric).
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6388>
v2:
- Rename the ".arm64-deqp-test-vk" template as
".arm64-deqp-test-freedreno-vk" (Eric).
v3:
- Rename the ".arm64-test" template as ".freedreno-test" (Eric).
- Rename the ".arm64-deqp-test" template as
".baremetal-deqp-test" (Eric).
- Rename the ".arm64-deqp-test-freedreno-vk" template as
".baremetal-deqp-test-freedreno-vk".
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6388>
The STRIP_CMD env var is used in several build scripts, not just by
dEQP.
Also, we want to have the rootfs destination directory created so it
also exists for builds that only move directory trees in there.
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6388>
Along the way, modify the piglit run script and refactor the way
piglit jobs are generated.
v2:
- Squashed the commit to remove tracie jobs (Eric).
v3:
- Extend information in the comments about the need to use a
running X server for replaying with Vulkan (Tomeu).
- Do actually fail if the upload doesn't work (Tomeu).
v4:
- Rename *-piglit-traces jobs with *-traces.
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> [v3]
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6388>
We also need that summary's aggregate command can use JUnit as backend,
a cross-compilation fix for its CMakeList.txt, a fix for the JUnit
backend and a small change in replayer's compare output.
v2:
- Updated the piglit commit so it features another couple of needed
fixes.
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com> [v1]
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6388>
v2:
- Update tag for the android_build image (Michel).
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com> [v1]
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6388>
The -S and -B flags were officially introduced in CMake 3.13.
Avoids the following warning:
"
CMake Warning:
No source or binary directory provided. Both will be assumed to be the
same as the current working directory, but note that this warning will
become a fatal error in future CMake releases.
"
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6388>
When introducing/removing these files, it's easy to forget to update the
yml to point to them. Instead of requiring the separate update, just have
the runner script pick the right one from a single per-gpu variable.
As a result, we now pick up the new deqp-lvp-skips.txt that was added but
not conected. This also required moving some bypass flakes from the
shared a630 flakes list to a separate list, which is a feature because now
we'd notice the introduction of flakes to the gmem path.
Fixes: ab79e6b8e3 ("ci: skip failing test on lavapipe")
Acked-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Juan A. Suarez <jasuarez@igalia.com>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8147>
For "0" (its default) deqp-runner picks a number of jobs corresponding to
the CPU count, so set our hardware runners to use that (note that mesa's
deqp-runner.sh will pick a default of 4 if we don't specify a
DEQP_PARALLEL).
This means we'll allocate threads for the slow cores on a630 now, reducing
gles3 runtime from 6.5 minutes to around 5.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8132>
They've been doing so since the webdav results upload was added. This
means that we'll get normal truncated failures lists with the pointer to
the job artifacts, rather than filling a log file if you broke everything.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8132>
I want to enable ASan runs on freedreno. It turns out it's a long road to
get there, starting with making sure we can run our unit tests with the
sanitizer enabled.
While I'm revving this container, add in valgrind too to make sure that
our build paths with valgrind enabled work.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7936>
Now that we've soaked the Windows build in and it's working well,
restrict it to only running on given pipelines, albeit in a somewhat
surprising way.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8053>
The classic OSMesa renders directly into user memory using
src/mesa/swrast, while gallium OSMesa renders using softpipe or llvmpipe
and copies out at glFlush() time. This would make gallium look like a
worse choice for OSMesa, except that swrast is:
1) Painfully slow to render compared to llvmpipe
2) Incorrect at derivatives
3) Limited to GL 2.1 instead of GL 4.6
In my survey of OSMesa users, debian was the remaining holdout with
classic OSMesa in use on hurd and some rare non-LLVM-supported
architectures (sh4, alpha, etc.). As of today, they've switched to
softpipe-based gallium OSMesa for them.
To prevent people from running the wrong OSMesa (to the extent that
running OSMesa can ever be the right thing), delete the classic
version.
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Closes: #320Closes: #877Closes: #2297
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/1243>
As it will fail right away if there isn't, and that prevents the CI to
run on people's branches.
$ ci-fairy check-merge-request --require-allow-collaboration --junit-xml=check-merge-request.xml
ERROR: No open merge request against mesa/mesa with sha 9f6aba4be0
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Fixes: d4151f2e ("ci: Run sanity job only in pre-merge pipelines")
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8032>
This should make more important jobs visible without scrolling on
pipeline pages.
The deploy stage jobs only depend on the sanity job or none at all, so
this has no impact on when the former can run.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7926>
It's more of a nuisance than useful for forked branches.
This means the test-docs job can no longer have a direct dependency on
sanity for forked branches, so split it up into two jobs: one for
pre-merge pipelines, one for forked branches.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7926>
Require libwayland 1.18 and remove the workaround for
WL_SHM_FORMAT_{A,X}BGR16161616F.
Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7771>
And use it in jobs for images using another Mesa image as their base.
Should fix the build of images which don't use another Mesa image as
their base (by no longer setting the FDO_BASE_IMAGE variable).
Fixes: 0781d9825b "ci: Append $MESA_TEMPLATES_COMMIT to image tags"
Acked-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Andres Gomez <agomez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7957>
This fixes the build of images which use another Mesa image as the base.
v2:
* Move $CI_REGISTRY_IMAGE expansion into FDO_BASE_IMAGE assignment as
well (Dave Airlie)
Fixes: 0781d9825b "ci: Append $MESA_TEMPLATES_COMMIT to image tags"
Reported-by: Dave Airlie <airlied@redhat.com>
Acked-by: Eric Anholt <eric@anholt.net> # v1
Reviewed-by: Andres Gomez <agomez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7957>
This ensures all images get rebuilt when we update to a newer
ci-templates commit.
v2:
* Append to WINDOWS(_UPSTREAM)_IMAGE instead of WINDOWS_TAG. The latter
failed, apparently variables are not expanded recursively on the
Windows runners.
* Use separate MESA_IMAGE_TAG/MESA_BASE_IMAGE variables instead of
appending to each FDO_DISTRIBUTION_TAG/FDO_BASE_IMAGE separately for
Linux jobs, to prevent accidentally dropping the suffix.
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7902>
Since the job which creates the cache tarball starts from the previous
cache, the cache kept accumulating cruft and growing bigger.
This cuts the size of the tarball in half (from almost 600M to under
300M), which can translate to significant time savings when downloading
it on some runners.
v2:
* Use git gc --aggressive (Eric Anholt)
Reviewed-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7920>
This tests OpenGL ES 2.0 CTS suite with VC4 drivers, through baremetal
Raspberry Pi 3 devices.
The devices are connected to a switch that supports Power over Ethernet
(PoE), so the devices can be started/stopped through the switch, and
also to a host that runs the GitLab runner through serial-to-USB cables,
to monitor the devices to know when the testing finishes.
The Raspberries uses a network boot, using NFS and TFTP. For the root
filesystem, they use the one created in the armhf container. For the
kernel/modules case, this is handled externally. Currently it is using
the same kernel/modules that come with the Raspberry Pi OS. In future we
could build them in the same armhf container.
At this moment we only test armhf architecture, as this is the default
one suggested by the Raspberry Pi Foundation. In future we could also
add testing for arm64 architecture.
Finally, for the very rare ocassions where the Raspberry Pi 3 device is
booted but no data is received, it retries the testing for a second
time, powering off and on the device in the process.
v2:
- Remove commit that exists capture devcoredump (Eric)
- Squash remaining commits in one (Andres)
v3:
- Add missing boot timeout check (Juan)
v4:
- Use locks when running the PoE on/off script (Eric)
- Use a timeout for serial read (Eric)
v5:
- Rename stage to "raspberrypi" (Eric)
- Bump up arm64_test tag (Eric)
v6:
- Make serial buffer timeout optional (Juan)
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7628>
To make it easier to differentiate now that llvmpipe & softpipe are
lumped into the same stage.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Acked-by: Eric Anholt <eric@anholt.net>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7873>
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Acked-by: Eric Anholt <eric@anholt.net>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7873>
This is now called 'arm'; even though they're two separate drivers, it
does help cut down on some of the more egregious horizontal scrolling.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Acked-by: Eric Anholt <eric@anholt.net>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7873>
This is now called 'layered-backends'.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Acked-by: Eric Anholt <eric@anholt.net>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7873>
This is now called 'amd'.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Acked-by: Eric Anholt <eric@anholt.net>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7873>
This is now called 'software-renderer'.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Acked-by: Eric Anholt <eric@anholt.net>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7873>
This is now called 'build-misc'.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Acked-by: Eric Anholt <eric@anholt.net>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7873>
The only thing we really need from the git-repo is the piglit_run.ps1
script, so let's upload that into our artifacts instead.
Fixes: d560addc30 ("gitlab-ci: run piglit on windows")
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7867>
This tests the D3D12 driver on Windows during CI, to prevent accidental
breakage.
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7857>
GitLab CI doesn't allow us to store artifacts from outside the
build-directory, so let's create an install-directory and install there
instead.
To do this properly, we need to expand a variable inside the
command-line, so we need to change to a double-quoted string.
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7857>
Without this, the test-docs job could end up waiting for manual action
after the sanity job failed, which prevented the pipeline as a whole
from having failed status.
(This means the test-docs job will no longer exist in one corner case
where it did before, when pushing directly to a non-master branch of
the main repository. That should be fine, since the docs are only
deployed from master.)
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7676>
This is possible now that it uses the external ci-fairy docker image.
This allows dropping the "check mr" job from needs: of other jobs, the
container stage jobs will only become available once the sanity stage
has passed.
This also allows simplifying the "check mr" job rules and script, since
the job only needs to exist in pre-merge pipelines for MRs anymore.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7676>
Trying this again after reworking the virtualised network setup on the
Windows runner.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Jesse Natalie <jenatali@microsoft.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7537>
The full end-to-end job now completes in around 45min, which is far more
reasonable than the previous 3.5h.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Jesse Natalie <jenatali@microsoft.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7537>
We need these builds in Windows in order to build the microsoft-clc
parts.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Jesse Natalie <jenatali@microsoft.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7537>
We've slowly been pushing -Werror through the set of CI builds, and it
looks like clover is clean at the moment. Keep it that way.
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Acked-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7664>
Seems some sort of linux change (bugfix?) resulted in the db410cs
selecting device mode for the db410cs due to the micro cable being
plugged in (fastboot runs them in device mode), so we weren't finding
the network and getting artifacts out.
Closes: #3728
Acked-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6971>
I want the new version to show the fix in the fd-largeconsts branch (and
make sure the pass keeps working, and make sure other drivers get around
to fixing the issue). While I'm here, cherry-pick in the VK test along
with the GLES one, and also the fix for clip_three on ARMs.
Since the VK and GL test lists were changing, I took the opportunity to
reset freedreno xfails lists to just the tests that are being run with the
CTS uprev, and increase its coverage to 1/10th of the CTS across two
boards (since we just freed up a bunch of runtime with the grouped gles
"other" job).
For panfrost, I didn't spend the time characterizing the t720 fragment_ops
flakes like I did for the deqp-runner change. Given that the random
behavior changes between CTS versions, it doesn't seem to be worth the
time to do so.
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6971>
To increase our VK coverage on a630, we want to have two jobs in parallel,
but we still can't hit full coverage so we need the fractional setting to
be separate from gitlab CI's flags for setting up parallel jobs.
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6971>
This saves the minute and a half boot time on each of these minute-or-less
test jobs. The whole job was 3.5 minutes in my last run.
Acked-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6971>
The recent change to install kernel modules for AMD included a sed job to
disable kernel modules in the defconfig. This somehow broke booting on
a307, except the commit failed to bump the arm64_test tag so it wasn't
noticed until the next uprev. (I didn't notice when landing the next
change to that container to add the deqp runner, because I didn't get a
git conflict on rebasing my tag bump so I didn't bump the tag again to
pull in the kernel changes and catch the fail).
I've spent a while trying to debug what's happened (including what
*should* be a replication of the kernel build on my local db410c) and come
up empty. Just punt and disable the AMD kernel module changes on
baremetal to fix it. Bump every container using lava_build.sh to make
sure we don't screw anything up with the script changes.
Fixes: 60c5729d16 ("ci: Distribute ADMGPU driver to LAVA as a module")
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6971>
I found the C++ runner hard to develop on, and we had stability issues and
outstanding feature needs that made me want something I felt good about
hacking on. Thus, Rewrite It In Rust of the deqp runner.
The new runner includes:
- Skip lists don't reshuffle the test list.
- Known-flake handling without resorting to skip lists (fixing our main CI
reliability issue on a3xx right now).
- Per-thread Vulkan shader caches should speed up VK CI runtime.
- Tracking of crashes separate from fails (so we can see progress on that
front).
- Logging of deqp stderr spam (particularly assertion failures!) in the CI
log.
- Integrated QPA filtering so we don't have bash perf issues for it.
- Logging of what caselist to go look at for a given error report (in red,
so it's easier to find in your CI log).
- The code is 1/3 unit tests, and easy to extend for more coverage.
- Non-LAVA CI runs create a failures.csv in artifacts that you can check
in as your deqp-*-fails.txt file.
- Test runtime is included in results.csv so you can debug how to speed up
your CI job.
- Pretty summary at the end of the run of slow/flaky/failed tests.
Since this is a new runner with a different RNG, the test groups are
shuffled one more time. This seems to result in some panfrost T720
stability issues (See its new deqp-panfrost-t720-flakes.txt), and one new
flake in freedreno a630.
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7434>
As it needs firmware to probe, and we cannot bundle it within the kernel
image because it is incompatible with the GPL.
Currently we rebind the driver after boot but that's slow and fragile,
as unloads of DRM drivers aren't generally tested.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7420>
So that if the former fails, build & test jobs won't run, wasting less
time & CI resources.
This requires slight tweaks to the rules: of the former job, to make
sure it always exists when the build jobs do.
Acked-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7278>
These can catch various common issues in MR settings and Git commit
logs.
The "check mr" job only exists in pre-merge pipelines for MRs, and runs
automatically.
The "check commits" job only exists in pre-merge pipelines for MRs and
in pipelines for forked branches. It runs automatically in the former
case and can be manually triggered in the latter.
v2:
* Use git_archive docker image (Daniel Stone)
* Use a single sanity stage for both jobs (Tomeu Vizoso)
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6209>
We put it in the first container stage to prevent it from waiting for
jobs in previous stages, but empty needs: works for that as well.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6209>
I wasted a bunch of time today tracking down a spurious test results
change due to a driver invoking UB by running tests where NIR validation
had failed (instruction reading from components beyond vector size). If
we need to shrink our coverage to get runtimes down, it will still be
better to be catching validation errors in CI.
To keep the test jobs runtime under 10 minutes, I've split a530's gles2 to
two different jobs.
Acked-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7203>
In SDK 25 (Android 7, 2016), the kernel only went up to around 4.4, so
the upstreamed sync API didn't exist, and libsync didn't expose
sync_merge().
In SDK 26 (Android 8, 2017), the kernel is sometimes bumped to 4.9 or
4.14, but libsync has a sync_merge() that operates on either the
downstream or the upstream API.
Since our android-targeting drivers in general use sync objects (requiring
a kernel newer than 7 got) and sync_merge() (suggesting interaction with
external fencing that started in Android 8), make CI build against an SDK
version with the sync API. I think really doing SDK 25 right at this
point would involve backporting mesa with some #ifdefs to not expose sync
APIs that wouldn't work.
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Acked-by: Tapani Pälli <tapani.palli@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6821>
To support Android drivers, we're going to want to be tracking that Mesa's
build succeeds on a real android toolchain. This still uses the android
stubs since these libs aren't in the NDK.
Note that I had to drop the Intel and AMD drivers currently: we don't have
LLVM cross-compiled for Android in this container, and I'm honestly hoping
ACO saves us from that. Intel has dependencies on libexpat, which AOSP
really doesn't want to bring in, and it looks to me like those dependencies
could be optional.
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6700>
This causes a lot of hiccups on the CL tests, but I've got most of
them fixed in another MR in pieces.
This should at least give a much more realistic baseline.
v2: use script in both places
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7073>
This adds support for building clover/llvmpipe and running the
piglit CL tests on it.
It uses the gl testing container, and add builds the libclc
spirv libraries as part of that which requires the llvm spirv
translator in the build container.
It also builds the llvm spirv translator as part of the build
root and creates a mesa build that builds clover for testing
against it. It uses llvm 10 as the baseline.
This drops bswap as it has an oob memory access with llvmpipe
which cause flaky test results. phatk also seems flaky
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6901>
The gles3 and gles31 multisample and 565-no-depth-no-stencil caselists
are also mustpass. And they don't add a significant number of extra
test cases.
The remaining mustpass caselists all involve rotation, which is not
currently supported in the surfaceless deqp build.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6553>
Some compile-time regressions go unnoticed because not all gallium
drivers are compiled as part of the meson-clang job. Let's pass an
explicit list of drivers to compile instead of setting GALLIUM_DRIVERS
to "auto" to increase CI coverage.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6811>
Since pre-merge pipelines run in the "mesa" namespace now, the rule
would have created the job if the source branch was named "master" (and
the job might have updated the public website).
Acked-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6566>
They are using a in source tree version of the needed libdrm
functionality or are shipping all needed headers in the source tree.
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6672>
I'd like to see this new non-UAPI feature bake in CI. More importantly,
it may prevent some classes of flakes on cheza by isolating the processes
on the GPU so that a fault in one doesn't stomp over memory in another.
I've also pulled in a fix that etnaviv needed for their upcoming CI.
We add a few more kernel options while uprevving:
- More interconnect drivers for getting good GPU perf
- PRNG so that we don't get late-in-boot complaints about randomness.
- db820c's power domains and ethernet so hopefully we can switch to this
upstream kernel
This seems to slightly change the flakes happening in bypass mode, so add
them to the list.
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Reviewed-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6592>
Inform gitlab about the JUnit XML file that tracie produces, so that the
pipeline page can present more detailed information about tracie test
results.
Signed-off-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6598>
Inform gitlab about the JUnit XML file that tracie produces, so that the
pipeline page can present more detailed information about tracie test
results.
Signed-off-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6598>
Only in pre-merge pipelines for MRs, or in pipelines for forked project
branches.
Having the manual job in post-merge pipelines prevented the pages job
from running automatically as well, which could prevent the public
website from getting updated.
Acked-by: Daniel Stone <daniels@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6534>
There's no need to have separate build scripts here, just choose what the
DEQP_TARGET is for the particular container being built. This brings in a
tremendous number of GLES test fixes that haven't made it into a tagged
gles CTS release.
Closes: #2056
Reviewed-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6526>
The version bump gets us various testcase fixes, mostly to test
requirements). While we're rebuilding the container, copy GL CTS stuff
from build-deqp-gl.sh -- we had already included the glcts binary in our
image, but we had unnecessary other binaries and were missing the mustpass
files (container size stays the same overall). Also pull in all the GLES
mustpass lists, not just the main ones -- Rob wants them to increase our
coverage to match what Android CTS covers.
Reviewed-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6526>
Since the last GitLab update, pre-merge pipelines for MRs run in the
mesa/mesa namespace, so this job didn't get created anymore, causing
trouble.
Reviewed-by: Daniel Stone <daniels@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6522>
Since the last GitLab update, pre-merge pipelines for MRs run in the
mesa/mesa namespace, so this job didn't get created anymore, causing
trouble.
Reviewed-by: Daniel Stone <daniels@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6522>
Debian defaults to bfd, which is comically slow. We can't use lld because
the old version we have in the debian stable we use has various bugs.
This required bumping libwayland, which had multiply-defined symbols
issues in the previous release.
Closes: #3236
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6324>
This will keep us from needing new MRs to fix up release build warnings
after the fact. I've mostly derived from meson-gallium, dropping
components that aren't clean yet.
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6462>
Now that we have a more powerful runner and a more stable Docker
configuration, try re-enabling the Windows build.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6446>
I've been hacking on softpipe in the process of trying to delete a bunch
of core Mesa code, and want to make sure I don't regress desktop GL
either. The run takes under a minute and a half.
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6466>
This makes sure that we keep executing the tests so that we can get our
alerts in IRC and know whether the tests are still flaking. It also keeps
us from having adjustments to the skip list causing failures/flakes to
move to different tests (as seen with a530 having to move some xfails
around after changing the skip list)
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6392>
And remove a redundant call to ccache --show-stats
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6343>
As drivers have been tested with more and more traces, the yml file is
becoming a bit unwieldy. As more drivers are going to be tested with
traces, and more traces will be used, split them in per-driver files so
the size stays manageable.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Reviewed-By: Rohan Garg <rohan.garg@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6185>
We've seen this crash a few times over the past couple of weeks, but
haven't yet managed to reproduce locally and fix. In the meantime, just
skip.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6352>
This is the initial import of the vallium frontend for gallium.
This is only good enough to run the triangle and the gears demo
(wrongly) from Sascha demos.
Improvements are mostly on the llvmpipe side after this.
It contains an implementation of the Vulkan API which is mapped
onto the gallium API, and is suitable only for SOFTWARE drivers.
Command buffers are recordred into malloced memory, then later
they are played back against the gallium API. The command buffers
are mostly just Vulkan API marshalling but in some places the information is
processed before being put into the command buffer (renderpass stuff).
Execution happens on a separate "graphics" thread, againt the gallium API.
There is only a single queue which wraps a single gallium context.
Resources are allocated via the new resource/memory APIs.
Shaders are created via the context and bound/unbound in the
second thread.
(No HW for reasons - memory management, sw paths for lots of paths,
pointless CPU side queue)
v2: drop mesa_icd, drop cpp_args, drop extra flags, change meson config (Eric)
v2.1: use meson-gallium job
meson pieces:
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
overall:
Acked-by: Roland Scheidegger <sroland@vmware.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6082>
To make sure we don't completely break ACO GFX1030 support.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6257>
https://github.com/KhronosGroup/EGL-Registry/pull/95 has moved
a couple of extensions defines and functions to the upstream `eglext.h`,
but when 9a74746bd1 sync'ed these files we broke compilation
of apps that require these symbols on systems that don't have the
updated Khronos headers.
On non-GLVND builds, we still provide these headers, so everything's
fine, but on GLVND builds the Khronos headers are external so we need to
make sure we have a libglvnd version that's recent enough.
Fixes: 9a74746bd1 ("EGL: sync headers with Khronos")
Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Acked-by: Daniel Stone <daniels@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6069>
We anyway depend already on robust network support in the DUTs, and we
can save quite some time this way.
It will also allow us to grow further as we expand coverage.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-By: Rohan Garg <rohan.garg@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6114>
Some changes unintendedly slipped into an unrelated commit before it was
merged.
This caused kernel modules to be built and installed in the ramdisk,
which caused some devices to fail to boot due to the ramdisk size limit
being surpassed.
These changes weren't in effect until a subsequent commit triggered a
rebuild of the ramdisks.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Fixes: a9560939e0 ("ci: Build-test Panfrost tools")
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6167>
Now that we have MinIO, we can distribute traces better than by direct
downloads from git.
With a caching MinIO instance local to the DUT, total run times should
be noticeably impacted.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6136>
The MinIO server is sometimes complaining about the submitted date being
too off.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6135>
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Acked-by: Daniel Schürmann <daniel@schuermann.dev>
Acked-by: Timur Kristóf <timur.kristof@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3521>
For testing Mesa on LAVA devices with the amd64 architecture, build
kernels and rootfs in the same way as we do for arm64 and armhf.
Also add a few trivial jobs for a specific AMD Chromebook.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Rohan Garg <rohan.garg@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5903>
As we are doing that in several places already and we'll need to build
in others as well.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Rohan Garg <rohan.garg@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5903>
This also tunes `.freedreno-rules` a bit so that it isn't triggered by
various tools that don't effect the driver build.
The .gitlab-ci directory is kept separate from the toplevel one so that
updates to (for example) reference decode output do not trigger all the
other-driver jobs to run.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6070>
We're now using at least twice as many CPU cores per job (on shared
runners), so they only take about half as long, and should still be
under 10 minutes.
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6011>
If another MR was merged while these were still running for the main
project, the result could be no updated images in the main project
registry (forcing a rebuild of the new images in all forked projects) or
an outdated Mesa website.
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6011>
Upload failed images and the results.yml file to MinIO, to facilitate
debugging.
Also, fix version checking when git is installed as Mesa is going to
output a different renderer string if git is installed.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-By: Rohan Garg <rohan.garg@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5472>
fd.o has retuned the x86 runners on packet for -j8. Rather than having to
tweak our CI every time fd.o decides to rebalance job concurrency, respect
what the runner admin has chosen for their builds (this will also be
convenient for people with large local runners).
Reviewed-by: Michel Dänzer <michel@daenzer.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5669>
I hadn't realised these were disabled, llvmpipe now exposes this extension.
One additional failure is fine to get the added testing coverage.
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5973>
I haven't noticed tftp boot issues in last few days, not sure if they
where just a fluke on Mon or if it is somehow related to # of jobs we
run (ie. having more of the c630 runners powered up and running more
of the time).
Let's turn them back on and see what happens.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5952>
I mistakenly removed what I thought were remnants of when Freedreno used
LAVA for their DUTs. lava_arm.sh is used for baremetal, so re-add that
code.
Fixes: dcd171f5e9 ("gitlab-ci: More stable URL for kernel and ramdisk artifacts, for LAVA")
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5839>
The commit below changed the rule such that it accidentally also applied
to the non-MR pipelines created by Marge, resulting in Marge triggering
twice as many jobs as necessary.
Fixes: 549b4a3dd4 "gitlab-ci: Automatically run pipelines for Marge
Bot pre-merge only"
Acked-by: Daniel Stone <daniels@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5898>
Since version 2.4.101 there are only xz archives hence the bz2 to xz
change.
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5906>
Since version 2.4.101 there are only xz archives hence the bz2 to xz
change.
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4580>
Benjamin Tissoires
Eric Anholt
Juan A. Suarez Romero
Rob Clark
Michel Dänzer
Andres Gomez
Adam Jackson
Danylo Piliaiev
Jesse Natalie
Christian Gmeiner
Andres Gomez
Daniel Stone
Dave Airlie
Tomeu Vizoso
Simon Ser
Erik Faye-Lund
Samuel Pitoiset
Eric Engestrom
Rhys Perry
Alejandro Piñeiro
Serge Martin
Boris Brezillon
Alexandros Frantzis
Tapani Pälli
Kristian H. Kristensen
Rohan Garg
Karol Herbst
Jonathan Marek