Most of this is fairly straightforward; we just set all the modes on any
derefs which are generic. The one tricky bit is OpGenericCastToPtrExplicit.
Instead of adding NIR intrinsics to do the cast, we add NIR intrinsics
to do a storage class check and then bcsel based on that.
Reviewed-by: Jesse Natalie <jenatali@microsoft.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6332>
This will create code that is easier to combine into MADs/FMA when the
last component of the vector is 1.0.
nir_opt_algebraic_late has an optimization to do something similar but it
only works for inexact code, if the multiplication-by-1 optimization is
done before it and if the backend enables fuse_ffma.
fossil-db (Navi):
Totals from 4296 (3.75% of 114665) affected shaders:
SGPRs: 283468 -> 283764 (+0.10%); split: -0.02%, +0.12%
VGPRs: 172868 -> 172904 (+0.02%); split: -0.09%, +0.11%
CodeSize: 14045312 -> 14027128 (-0.13%); split: -0.15%, +0.02%
MaxWaves: 59285 -> 59282 (-0.01%); split: +0.04%, -0.05%
Instrs: 2703507 -> 2683187 (-0.75%); split: -0.76%, +0.00%
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5631>
Note, the aligned versions aren't handled specially yet.
The float16buffer capability is now at least partially supported after
this patch, so move it to be supported when kernels are supported.
v2 (Jason Ekstrand):
- A few cosmetic cleanups around type/base_type
- Rebased on top of the big SPIR-V SSA value rework
- Use the new version of the conversion helpers
Reviewed-by: Jesse Natalie <jenatali@microsoft.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6945>
This is done for kernels via the new convert_alu_types intrinsic. For
Vulkan and OpenGL, we maintain the old path so that drivers don't have
to add that lowering pass.
Reviewed-by: Jesse Natalie <jenatali@microsoft.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6945>
SPIR-V dest sizes match the input, while nir is always int32. Insert
casts from the nir op to the expected SPIR-V dest.
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6313>
It was always fneu but naming it fne causes confusion from time to time. So
lets rename it. Later we also want to add other unordered and fne, this is
a smaller preparation for that.
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6377>
Primarily, we check for two things:
1. That we only ever add SSA values via vtn_push_ssa_value and
vtn_copy_value.
2. That the type of the SSA value matches the SPIR-V destination type.
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5278>
For some reason, we were doing a signed shift vectors and an unsigned
shift for scalars. We then plug it into i2b so it should make no
difference whatsoever. The fact that we're doing different things for
vectors vs. scalars is bonkers. Let's simplify the code a bit.
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5278>
v2: Rebase on 272e927d0e ("nir/spirv: initial handling of OpenCL.std
extension opcodes")
v3: Add missing SpvOpUCountTrailingZerosINTEL case to switch in
vtn_handle_body_instruction. Remove stray semicolon in
vtn_nir_alu_op_for_spirv_opcode. Use umin instead of umax for
SpvOpUCountTrailingZerosINTEL "lowering" in vtn_handle_alu.
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/767>
When handling the specified ALU operations, check for the decorations
and set nir_alu_instr no_signed_wrap and no_unsigned_wrap flags accordingly.
v2: Add a glsl_base_type_is_unsigned_integer() helper. (Karol)
v3: Rename helper to glsl_base_type_is_uint().
v4: Use two flags, so we don't need the helper anymore. (Connor)
v5: Pass alu directly to handle function. (Jason)
Reviewed-by: Karol Herbst <kherbst@redhat.com> [v3]
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
The difference between imov and fmov has been a constant source of
confusion in NIR for years. No one really knows why we have two or when
to use one vs. the other. The real reason is that they do different
things in the presence of source and destination modifiers. However,
without modifiers (which many back-ends don't have), they are identical.
Now that we've reworked nir_lower_to_source_mods to leave one abs/neg
instruction in place rather than replacing them with imov or fmov
instructions, we don't need two different instructions at all anymore.
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Reviewed-by: Vasily Khoruzhick <anarsoul@gmail.com>
Acked-by: Rob Clark <robdclark@chromium.org>
Decorations (and ExecutionModes) can have not only literals, but also
Ids associated with them. So rename the field to the more general
name "Operand" used by the spec.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
v2: When available, include the opcode name too. (Karol)
v3: Use more to_string helpers. (Karol)
Include the wrong bit_size in those failures.
Include the capability number in spv_check_supported.
Provide vtn_fail_with_* macros to avoid noise in the call sites.
v4: Provide macros only for opcode and decoration, which have enough
usages to justify them. (Jason)
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Not complete, mostly just adding things as I encounter them in CTS. But
not getting far enough yet to hit most of the OpenCL.std instructions.
Anyway, this is better than nothing and covers the most common builtins.
v2: add hadd proof from Jason
move some of the lowering into opt_algebraic and create new nir opcodes
simplify nextafter lowering
fix normalize lowering for inf
rework upsample to use nir_pack_bits
add missing files to build systems
v3: split lines of iadd/sub_sat expressions
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Use new nir opcode nir_[i/u]mul_2x32_64 and extract lower and higher 32
bits as needed instead of emitting mul and mul_high.
v2: Surround the switch case with curly braces (Jason Ekstrand)
Signed-off-by: Sagar Ghuge <sagar.ghuge@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This is a squash of a few distinct changes:
glsl,spirv: Generate 1-bit Booleans
Revert "Use 32-bit opcodes in the NIR producers and optimizations"
Revert "nir/builder: Generate 32-bit bool opcodes transparently"
nir/builder: Generate 1-bit Booleans in nir_build_imm_bool
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Tested-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This is a squash of a bunch of individual changes:
nir/builder: Generate 32-bit bool opcodes transparently
nir/algebraic: Remap Boolean opcodes to the 32-bit variant
Use 32-bit opcodes in the NIR producers and optimizations
Generated with a little hand-editing and the following sed commands:
sed -i 's/nir_op_ball_fequal/nir_op_b32all_fequal/g' **/*.c
sed -i 's/nir_op_bany_fnequal/nir_op_b32any_fnequal/g' **/*.c
sed -i 's/nir_op_ball_iequal/nir_op_b32all_iequal/g' **/*.c
sed -i 's/nir_op_bany_inequal/nir_op_b32any_inequal/g' **/*.c
sed -i 's/nir_op_\([fiu]lt\)/nir_op_\132/g' **/*.c
sed -i 's/nir_op_\([fiu]ge\)/nir_op_\132/g' **/*.c
sed -i 's/nir_op_\([fiu]ne\)/nir_op_\132/g' **/*.c
sed -i 's/nir_op_\([fiu]eq\)/nir_op_\132/g' **/*.c
sed -i 's/nir_op_\([fi]\)ne32g/nir_op_\1neg/g' **/*.c
sed -i 's/nir_op_bcsel/nir_op_b32csel/g' **/*.c
Use 32-bit opcodes in the NIR back-ends
Generated with a little hand-editing and the following sed commands:
sed -i 's/nir_op_ball_fequal/nir_op_b32all_fequal/g' **/*.c
sed -i 's/nir_op_bany_fnequal/nir_op_b32any_fnequal/g' **/*.c
sed -i 's/nir_op_ball_iequal/nir_op_b32all_iequal/g' **/*.c
sed -i 's/nir_op_bany_inequal/nir_op_b32any_inequal/g' **/*.c
sed -i 's/nir_op_\([fiu]lt\)/nir_op_\132/g' **/*.c
sed -i 's/nir_op_\([fiu]ge\)/nir_op_\132/g' **/*.c
sed -i 's/nir_op_\([fiu]ne\)/nir_op_\132/g' **/*.c
sed -i 's/nir_op_\([fiu]eq\)/nir_op_\132/g' **/*.c
sed -i 's/nir_op_\([fi]\)ne32g/nir_op_\1neg/g' **/*.c
sed -i 's/nir_op_bcsel/nir_op_b32csel/g' **/*.c
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Tested-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
The new helpers can generate any pack/unpack operation including those
for which we do not have specific opcodes and they express a bitcast in
terms of these pack/unpack operations. In particular, the new helpers
properly handle 8-bit types.
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
v2: fix for specialization constants as well
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Karol Herbst <kherbst@redhat.com>
OpenCL knows vector of size 8 and 16.
v2: rebased on master (nir_swizzle rework)
rework more declarations with nir_component_mask_t
adjust print_var_decl
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
SPIR-V allows to define the shift, offset and count operands for
shift and bitfield opcodes with a bit-size different than 32 bits,
but in NIR the opcodes have that limitation. As agreed in the
mailing list, this patch adds a conversion to 32 bits to fix this.
For more info, see:
https://lists.freedesktop.org/archives/mesa-dev/2018-April/193026.html
v2:
- src_bit_size will have zero value for variable bit-size operands (Jason).
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
For all of the OpFOrd* comparisons except OpFOrdNotEqual the hardware
should probably already return false if one of the operands is NaN so
we don’t need to have an explicit check for it. This seems to at least
work on Intel hardware. This should reduce the number of instructions
generated for the most common comparisons.
For what it’s worth, the original code to handle this was added in
e062eb6415. The commit message for that says that it was to fix
some CTS tests for OpFUnord* opcodes. Even if the hardware doesn’t
handle NaNs this patch shouldn’t affect those tests. At any rate they
have since been moved out of the mustpass list. Incidentally those
tests fail on the nvidia proprietary driver so it doesn’t seem like
handling NaNs correctly is a priority.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
The only change neccessary is to change the type of the constant used
to compare against.
This has been tested against the arb_gpu_shader_fp64/execution/
fs-isinf-dvec tests using the ARB_gl_spirv branch.
v2: Use nir_imm_floatN_t for the constant.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Previously bitset.h would include u_math.h to get bitscan.h. u_math.h
lives in src/gallium/auxiliary/util while both bitset.h and bitscan.h
live in src/util. Having the one file directly include another file
that lives in the same directory makes much more sense.
As a side-effect, several files need to directly include standard header
files that were previously indirectly included.
v2: Fix build break in src/amd/common/ac_nir_to_llvm.c.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Eduardo Lima Mitev <elima@igalia.com>
We don't need anymore the source and destination's data type, just
their bitsize.
v2:
- Use glsl_get_bit_size () instead (Jason).
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
There are some SPIRV opcodes (like UConvert and SConvert) have some
expectations of the output that doesn't depend on the operands
data type. Generalize the solution of all of them.
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
The code to handle mat multiplication by a scalar tries to pick either
imul or fmul depending on whether the matrix is float or integer.
However it was doing this by checking whether the base type is float.
This was making it choose the int path for doubles (and presumably
float16s).
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
SpvOpFConvert now manages the FPRoundingMode decorator for the
returning values enabling the nir_rounding_mode in the conversion
operation to fp16 values.
v2: Fixed breaking of specialization constants. (Jason Ekstrand)
v3: Avoid nir_rounding_mode * casting. (Jason Ekstrand)
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
nir_type_conversion enables new operations to handle rounding modes to
convert to fp16 values. Two new opcodes are enabled nir_op_f2f16_rtne
and nir_op_f2f16_rtz.
The undefined behaviour doesn't has any effect and uses the original
nir_op_f2f16 operation.
v2: Indentation fixed (Jason Ekstrand)
v3: Use explicit case for undefined rounding and assert if
rounding mode is used for non 16-bit float conversions
(Jason Ekstrand)
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Jason Ekstrand
Rhys Perry
Jesse Natalie
Karol Herbst
Ian Romanick
Caio Marcelo de Oliveira Filho
Dave Airlie
Timothy Arceri
Sagar Ghuge
Jason Ekstrand
Iago Toral Quiroga
Samuel Iglesias Gonsálvez
Neil Roberts
Jose Maria Casanova Crespo