All of this is already done in link_shaders. More clean-ups coming.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
_mesa_UseShaderProgramEXT, _mesa_ActiveProgramEXT, and
_mesa_CreateShaderProgramEXT were all removed when support for
GL_EXT_separate_shader_objects was removed.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Just remove the parameter. Silences:
../../src/mesa/main/ff_fragment_shader.cpp:668:1: warning: unused parameter 'p' [-Wunused-parameter]
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Fixes many piglit failures on IVB since 85edaa8.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=85425
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
Cc: Mathias Fröhlich <Mathias.Froehlich@gmx.net>
Previously, we were allowing the register allocation code to do the
computation for us in ra_set_finalize. However, the runtime for this
computation is O(c^4 * g) where c is the number of classes and g is the
number of GRF registers. However, these q-values are directly computable
based on the way we lay out our register classes so there is no need for
the aweful runtime algorithm.
We were doing ok until commit 7210583eb where we bumped the number of
register classes from 11 to 16. While startup times don't normally matter,
this caused piglit to take 4 times as long to run on Bay Trail. This patch
should make generating the ra_set much faster and melt the piglit run
times.
v2: Fixed a couple of bugs. I have now verified that the same q-values are
generated both ways.
Signed-off-by: Jason Ekstrand <jason.ekstrand@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
On older GENs in SIMD16 mode, we were accidentally building too much
interference into our register classes. Since everything is divided by 2,
the reigster allocator thinks we have 64 base registers instead of 128.
The actual GRF mapping still needs to be doubled, but as far as the ra_set
is concerned, we only have 64. We were accidentally adding way too much
interference.
Signed-off-by: Jason Ekstrand <jason.ekstrand@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
For GEN6 SIMD16 mode, we have to 2-align all the registers, so we only have
the even-numbered ones. This means that we have to divide the register
number by 2 when we precolor. This wasn't a problem before because we were
setting up the interference between ra_node registers wrong. This will be
fixed in the next commit.
Signed-off-by: Jason Ekstrand <jason.ekstrand@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
This shouldn't be a functional change since reg_belongs_to_class is just a
wrapper around BITSET_TEST. It just makes the code a little easier to
read.
Signed-off-by: Jason Ekstrand <jason.ekstrand@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Gallium should be prepared fine for ARB_clip_control.
So enable this and mention it in the release notes.
v2:
Only enable for drivers announcing the freshly introduced
PIPE_CAP_CLIP_HALFZ capability.
v3:
Use extension enable infrastructure to connect PIPE_CAP_CLIP_HALFZ
with ARB_clip_control.
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Mathias Froehlich <Mathias.Froehlich@web.de>
In preparation of ARB_clip_control. Let the driver decide if
it supports pipe_rasterizer_state::clip_halfz being set to true.
v3:
Initially enable on ilo.
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Mathias Froehlich <Mathias.Froehlich@web.de
Restore clip control to the default state if MESA_META_VIEWPORT
or MESA_META_DEPTH_TEST is requested.
v3:
Handle clip control state with MESA_META_TRANSFORM.
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Mathias Froehlich <Mathias.Froehlich@web.de>
Implement the mesa parts of ARB_clip_control.
So far no driver enables this.
v3:
Restrict getting clip control state to the availability
of ARB_clip_control.
Move to transformation state.
Handle clip control state with the GL_TRANSFORM_BIT.
Move _FrontBit update into state.c.
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Mathias Froehlich <Mathias.Froehlich@web.de>
This is for preparation of ARB_clip_control.
v3:
Add comments.
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Mathias Froehlich <Mathias.Froehlich@web.de>
This allows vc4_opt_cse.c to CSE-away operations involving the same
uniform values.
total instructions in shared programs: 37341 -> 36906 (-1.16%)
instructions in affected programs: 10233 -> 9798 (-4.25%)
total uniforms in shared programs: 10523 -> 10320 (-1.93%)
uniforms in affected programs: 2467 -> 2264 (-8.23%)
This saves a bunch of extra flushes when texsubimaging a whole texture
that's been used for rendering, or subdataing a whole BO. In particular,
this massively reduces the runtime of piglit texture-packed-formats (when
the probes have been moved out of the inner loop).
I'm going to be using VC4_DEBUG=shaderdb,norast to do shaderdb stats, but
when debugging regressions, I want to match shaderdb output to shader
disassembly.
This reverts commit 01e6371149.
Since then many Hyper-Z issues have been fixed or worked around.
Enable Hyper-Z by default so that we get enough feedback for the upcoming
mesa 10.4 release.
If you have issues with Hyper-Z try to disable Hyper-Z using the enviroment
variable R600_DEBUG=nohyperz and please report the issue on the bugtracker.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=75011
See also: https://bugs.freedesktop.org/show_bug.cgi?id=75112
Signed-off-by: Andreas Boll <andreas.boll.dev@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
fd_bo_cpu_prep() doesn't realize the bo is already referenced in
unflushed cmdstream. It could be made to do so (but would have to be
implemented twice, ie. both for msm and kgsl). But we still can't do
the expected thing if the caller isn't using _NOSYNC. Because of the
way the tiling works, we need to build quite a bit of cmdstream at flush
time, which is not possible to do at the libdrm level.
So rather than trying to make fd_bo_cpu_prep() smarter than it can
possibly be, just *always* discard and reallocate if the
PIPE_TRANSFER_DISCARD_WHOLE_RESOURCE flag is set.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
v2: test for libelf once, check in both radeon and clover
CC: Tom Stellard <tom@stellard.net>
CC: Emil Velikov <emil.l.velikov@gmail.com>
CC: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Jan Vesely <jan.vesely@rutgers.edu>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Seems to be a typo judging from the overall declaration of the
template.
Cc: EdB <edb+mesa@sigluy.net>
Cc: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
- Use macro for munmap under Android - the STATIC_ASSERT uses
a off_t which is not used under Android for mmap. As loff_t size
does not vary as does off_t just ignore the assert.
- Wrap the long lines to improve readability.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
The setMCJITMemoryManager method doesn't exist in LLVM 3.3.
I thought I had tested the latest version of my earlier change with LLVM
3.3, but it looks I missed it.
Trivial.
JITMemoryManager was removed in LLVM 3.6, and replaced by its base class
RTDyldMemoryManager.
This change fixes our JIT memory managers specializations to derive from
RTDyldMemoryManager in LLVM 3.6 instead of JITMemoryManager.
This enables llvmpipe to run with LLVM 3.6.
However, lp_free_generated_code is basically a no-op because there are
not enough hook points in RTDyldMemoryManager to track and free the code
of a module. In other words, with MCJIT, code once created, stays
forever allocated until process destruction. This is not speicfic to
LLVM 3.6 -- it will happen whenever MCJIT is used regardless of version.
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
We'll need to update gallivm for the interface changes in LLVM 3.6, and
the fewer the number of older LLVM versions we support the less hairy that
will be.
As consequence HAVE_AVX define can disappear. (Note HAVE_AVX meant
whether LLVM version supports AVX or not. Runtime support for AVX is
always checked and enforced independently.)
Verified llvmpipe builds and runs with with LLVM 3.3, 3.4, and 3.5.
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
The functionality exposed by those extensions does not appear in ES3
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Matt Turner <mattst88@gmail.com>
If the user calls util_blitter_cache_all_shaders() set a flag and assert
that we never try to create any new fragment shaders after that point.
If the assertions fails, it means we missed generating some shader in
util_blitter_cache_all_shaders().
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Avoids a crash in case of negative array index is used in a
shader program.
Cc: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>
Ian Romanick
Emil Velikov
Jason Ekstrand
José Fonseca
Mathias Fröhlich
Eric Anholt
Andreas Boll
Matt Turner
Jan Vesely
Rob Clark
Mauro Rossi
Alon Levy
Ilia Mirkin
Brian Paul
Anuj Phogat
Marek Olšák