We'll soon need to freeze a batch not only when it's flushed, but also
when another batch depends on us, so let's add a helper to avoid
duplicating the logic.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
We just replace the per-context out_sync object by a pointer to the
the fence of the last last submitted batch. Pipelining of batches will
come later.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
So we can implement fine-grained dependency tracking between batches.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
So we can store the flags as data and keep the BO as a key. This way
we keep track of the type of access done on BOs.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
The type of access being done on a BO has impacts on job scheduling
(shared resources being written enforce serialization while those
being read only allow for job parallelization) and BO lifetime (the
fragment job might last longer than the vertex/tiler ones, if we can,
it's good to release BOs earlier so that others can re-use them
through the BO re-use cache).
Let's pass extra access flags to panfrost_batch_add_bo() and
panfrost_batch_create_bo() so the batch submission logic can take the
appropriate when submitting batches. Note that this information is not
used yet, we're just patching callers to pass the correct flags here.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
We know a shader will be used by a batch when
panfrost_patch_shader_state() is called, so let's add the shader BO at
that time.
Suggested-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
The CTS finally has agreed to drop the requirement for a
565-no-depth-no-stencil config for ES 3.0. Hence we can now remove the
code to satisfy this requirement using a pbuffer-only visual with
whatever other buffers the driver happens to have given us.
This reverts commit 82607f8a90,
commit 6ad31c4ff3 and
commit dacb11a585.
v2:
- Reference the VK-GL-CTS issue (Eric E.).
v3:
- Don't revert
fc21394bc4 ("egl: Quiet warning about front buffer rendering for pixmaps/pbuffers")
(Kenneth).
References: VK-GL-CTS issue 1601.
Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Andres Gomez <agomez@igalia.com>
Acked-by: Eric Engestrom <eric.engestrom@intel.com>
Acked-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This script is responsible for generating an entire page in the
docs/relnotes/ directory. It includes a template for the page, and uses
mako to fill in the necessary bits. It is designed to be purely fire and
forget, calculating previous versions, shortlogs, bug fixes, and dates.
Acked-by: Eric Engestrom <eric.engestrom@intel.com>
Acked-by: Juan A. Suarez <jasuarez@igalia.com>
The next patch is going to introduce a tool that creates the entire
release html page for us, without any user intervention. As such we
can't be editing it. To that end the script will read the
new_features.txt file to get a list of new features.
This is a flat text file, one entry per line.
Acked-by: Eric Engestrom <eric.engestrom@intel.com>
Acked-by: Juan A. Suarez <jasuarez@igalia.com>
On 64 bits platforms, some atomic operations like __sync_fetch_and_add()
have constant time, but on 32 bits platforms they are implemented with a
loop and might take much longer.
Additionally, it seems like if their operands are not aligned to 64
bits, they also require extra memory accesses. From the Intel
Architecture's Developer Manual Vol. 1, 4.1.1:
"A word or doubleword operand that crosses a 4-byte boundary or a
quadword operand that crosses an 8-byte boundary is considered
unaligned and requires two separate memory bus cycles for access."
Forcing the u64 field to be aligned to 64 bits seems to make the unit
tests that are stressing this finish much faster.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This replaces to old Bugzilla: tag, which no longer makes sense because
we don't use bugzilla anymore.
Reviewed-by: Eric Anholt <eric@anholt.net> (v1)
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
v1 by Topi Pohjolainen
v2,v3 by Anuj Phogat:
- Apply for gen >= 11
- Remove wa_bug_xxx function
- Use helper functions
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
RADV and RadeonSI both lower these two NIR instructions.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This lowers fmod and frem at NIR level like RadeonSI. fmod is
already lowered directly in NIR->LLVM, and frem will be lowered by
LLVM anyways.
This fixes a LLVM crash with:
dEQP-VK.glsl.builtin.precision_fp16_storage32b.frem.compute.scalar.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
... because it's wrong to do so. The error path out of
dri2_initialize_drm ends with dri2_display_destroy, which calls
functions in the vtable we're trying to set up, so if we dlclose the
driver then those function pointers will point off into space and things
crash.
Noticed this because after !1923 eglinfo would crash when setting up the
GBM platform. This was something of a cascade failure, because my kernel
is too old for DRM_IOCTL_I915_GETPARAM to work without DRM_AUTH, so i965
wouldn't load. platform_drm.c then got very confused when it tries to
load swrast as a dri2 driver.
Reviewed-by: Eric Anholt <eric@anholt.net>
uintptr_t is 32 bits in a 32-bits build, resulting in shifting out
of bounds.
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
We need the continue CS for referencing the tess/GDS/sample position BOs.
Fixes: 46e52df34d "radv: add tessellation ring allocation support. (v2)"
Fixes: e1dc3ab753 "radv/gfx10: allocate GDS/OA buffer objects for NGG streamout"
Fixes: 1171b304f3 "radv: overhaul fragment shader sample positions."
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Instead of a single cache shared between all jobs, but reduce the
maximum cache size to 1.5G (from 5G).
Rationale for smaller cache:
Pulling & pushing a 5G cache could take a long time. Consider
https://gitlab.freedesktop.org/mesa/mesa/-/jobs/684010 (click the "Show
complete raw" button to see timestamps): Pulling the cache took
1569927241-1569927194 = 47 seconds, pushing it 1569927671-1569927519
= 152, for a total of 199 seconds. The actual build took comparable
1569927518-1569927243 = 275 seconds, despite no cache hits from ccache.
In other words, the cache transfers almost doubled the job duration,
and they would have negated any build time benefits from ccache even
with a high cache hit rate.
Also, the smaller caches avoid blowing up storage requirements for them
too much.
Rationale for per-job caches:
Making a single cache significantly smaller might result in cached
build products from one job getting evicted by another job, reducing
the likelihood of cache hits from previous pipelines.
v2:
* Move up "ccache --max-size=1500M" call (Eric Engestrom)
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
To truly to do this correctly, we'll have to fix the discrepancy between
drm_virtgpu_3d_transfer_to_host and virtio_gpu_transfer_host_3d. However,
this is a good starting point.
Since virtio-gpu only supports self-import and export, this should be fine.
Let's only do WINSYS_HANDLE_TYPE_FD for this currently.
Reviewed by: Robert Tarasov <tutankhamen@chromium.org>
The winsys might supply dimensions that are different than
those we calculate. In additional, it may supply virtualized
modifiers.
In practice, a stride != bpp * width and virtualized modifiers don't
happen yet, but the plan is to move in that direction.
Also make virgl_resource_layout static.
Reviewed by: Robert Tarasov <tutankhamen@chromium.org>
i915 will report ENODEV on generations prior to Haswell because there
is no point in reporting values on those. This is prior any fusing
could happen on parts with identical PCI ids.
This query call was previously only triggered on generations that
support performance queries, which happens to match generation for
which i915 reports topology, but the commit pointed below started
using it on all generations.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Gitlab: https://gitlab.freedesktop.org/mesa/mesa/issues/1860
Cc: <mesa-stable@lists.freedesktop.org>
Fixes: 96e1c945f2 ("i965: Move device info initialization to common code")
Reviewed-by: Mark Janes <mark.a.janes@intel.com>
Random hangs no longer happen, I'm actually not sure if they were
related to this.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Make sure to export the expected clear values to the depth
stencil attachment.
This fixes dEQP-VK.pipeline.depth_range_unrestricted.* on GFX10.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
The number of vertices has to be adjusted with the output primitive
type.
This fixes dEQP-VK.transform_feedback.simple.triangle_strip_*.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
The GS outputs are stored differently in the LDS storage, they
are indexed by out_idx which is incremented for each stored DWORD.
Thus, we need a different path for exporting the stream outputs.
This fixes a bunch of CTS failures when NGG GS is force enabled.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
It's unnecessary to store/load more components that needed.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
The LDS storage allocated for stream outputs is 4 * N, where N
is the number of outputs. So, we have to store/load with N as index
and not with the output location as index.
This doesn't fix anything known but it should fix out-of-bounds
access and it also reduces the number of outputs written to the
LDS storage.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
The buffer isn't necessarily used before.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
The last of these was deleted in 44a8e51354 ("d3d1x: Remove.")
over 6 years ago.
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Some hardware has a bug with triangle strips and it is signalled by the
flag BUG_FIXED8 whether this bug has been fixed. So only enable triangle
strips when this flag is set.
Thanks: Jonathan Marek and Christian Gmeiner for the pointers
v2: Add TODO to indicate that the handling should be refined
(Jonathan & Christian)
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
It's unused here, and undefined in scons. It is used in targets/osmesa,
but it's properly defined there already.
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
On the Android Antutu benchmark we ran into an assert in ISL where the
(base layer + num layers) > total layers. It turns out the core of
mesa forgot to clear the _Layer variable, potentially leaving an
inconsistent value.
v2: Pull setting u->_Layer out of the conditional blocks (Jason)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
In converting to shift/size-based validation, we lost a condition from
the ARGB/XRGB equivalence check, which left it working one way round
but not the other, and broke applications like glmark2-es2-drm on some
platforms. Restore the equivalent check that *both* configs actually
have an alpha channel before considering a mismatch.
Fixes: 7b4ed2b513 ("egl: Convert configs to use shifts and sizes instead of masks")
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
1. The hgl.c file is a read-only file versus read-write.
Ref: src/gallium/state_trackers/hgl/hgl.c
2. I've included the Haiku-specific patches I used to get a successful
build of Mesa 19.1.7 on Haiku using the meson/ninja build procedure.
Shows "[764/764] linking target ... libswpipe.so" at build completion.
v2:
Remove autotools files (Eric)
v3:
Update the patch
Reported-by: Ken Mays <kmays2000@gmail.com>
Tested-by: Ken Mays <kmays2000@gmail.com>
CC: mesa-stable@lists.freedesktop.org
Reviewed-by: Alexander von Gluck IV <kallisti5@unixzen.com>
After 41549a18e6 ("i965: Enable OpenGL 4.6 for Gen8+"), i965
implements GL_ARB_gl_spirv, GL_ARB_spirv_extensions and OpenGL 4.6.
After 15e439071d ("iris: Enable ARB_gl_spirv and ARB_spirv_extensions"),
iris implements GL_ARB_gl_spirv, GL_ARB_spirv_extensions and OpenGL
4.6.
v2:
- Explicit the support is for i965 and iris.
v3:
- Add also GL_ARB_spirv_extensions to the release notes (Alejandro).
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Found when building for Android in C99 mode. Include bitscan.h to ensure ffs is
available.
Fixes: 7b4ed2b5 ("egl: Convert configs to use shifts and sizes instead of masks")
Signed-off-by: Kevin Strasser <kevin.strasser@intel.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
The order of comparison has changed, so we need to invert the logic of
"insert_left" when using rb_tree_insert_at().
Fixes: dae33052db (util/rb_tree: Reverse the order of comparison
functions).
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>