A single backtick escaped string in Sphinx refers to the "default role"
which is vague, and in practice ends up producing the HTML cite-element.
That's almost certainly not what these uses wanted.
A bunch of these would probably be better served using appropriate roles
instead of inline-code markup, but this is almost certainly what was
meant here instead. Let's not let perfect be the enemy of good here, and
just do what was intended. Using the right roles everywhere is a big
task.
I usually don't do changes like these to the relnotes, but in this case
there were a *single* article that had these mistakes. I assume that was
an early bug in the script that generateg the relnotes. Let's patch it,
so we don't get misrendering if we change the default-role.
Reviewed-by: Yonggang Luo <luoyonggang@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19494>
We can provide better guidance on when to (un-)set this given that
everyone's on NIR now.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16539>
This reverts commit e749f67f89, which added a CAP
to support drivers that can only do upside-down point coordinates. That was
added specifically for Asahi, since Metal's point coordinate convention is
opposite Mesa's. Since then, additional reverse-engineering aided by the PowerVR
headers led me to the bit doing the flip in hardware, so Asahi does not use the
CAP since baadc1ec13 ("asahi: Don't use lower_wpos_pntc"). Garbage collect it.
[If it's needed for future hardware, we can revive it. But the plan is Vulkan
anyway.]
Signed-off-by: Alyssa Rosenzweig <alyssa@collabora.com>
Suggested-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19078>
All current drivers reports supporting this cap, let's just assume
it's always supported.
It seems better to lower this in the drivers, like we already do for
etnaviv, panfrost and zink...
Reviewed-By: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Begrudgingly-reviewed-by: Alyssa Rosenzweig <alyssa@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19049>
For those drivers that don't make full use of the 64 bits in
pipe_query_result.u64.
Applications will make use of it via GL_QUERY_COUNTER_BITS to handle
when the value rolls over.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-By: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Reviewed-by: Emma Anholt <emma@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10770>
We have fine NIR lowering for this (already called from mesa/st), no need
for a separate GLSL pass.
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/18361>
Every driver uses the nir_lower_system_values path now.
Reviewed-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/18327>
st/mesa will expose GL_ARM_shader_framebuffer_fetch_depth_stencil
if this new capability is supported by the driver.
Signed-off-by: Pavel Asyutchenko <sventeam@yandex.ru>
Reviewed-by: Alyssa Rosenzweig <alyssa@collabora.com>
Reviewed-By: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13979>
this is for drivers like zink that may or may not
handle dithering and so getting blend state changes
when this state changes isn't useful
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17043>
piglit select tests fail, so add a gallium cap to disable
for crocus explicitly.
crocus may choose to enable hardware select only for GPU
SKU which tested to be OK again.
Fixes: 6489af145c ("mesa: enable HardwareAcceleratedSelect")
Closes: #6644
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Emma Anholt <emma@anholt.net>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16955>
This is a clearer name for what it does than MUL_ZERO_WINS, and matches up
to the new name in shader_info.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16176>
When lower_wpos_pntc is used, the state tracker inserts code to
transform gl_PointCoord.y according to a uniform, to account for
API-requested point coordinate origin and framebuffer orientation. With
the transformation, driver-supplied point coordinates are expected to
have an upper left origin.
If the hardware point coordinate supports (only) a lower left origin,
the backend has to use lower_wpos_pntc and then lower *again* to flip
back. This ends up transforming twice, which is wasteful:
a = load point coord Y with lower left origin
a' = 1.0 - a
a'' = uniform_transform(a')
However, lower_wpos_pntc is quite capable of transforming for a lower
left origin too, it just needs to flip the transformation. Add a CAP
specifying the point coordinate origin convention, rather than assuming
upper-left. This simplifies the Asahi code greatly.
Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16829>
to allow exposing 4G - 1. The "SIZE" was also a misnomer because it meant
elements. This no longer clamps the size to INT_MAX in st/mesa.
Reviewed-By: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16881>
The drivers not setting it were:
- nv30, which gets lowering using NIR's lower_fsat flag.
- r300, which gets lowering using NIR's lower_fsat flag.
- a2xx, which has was getting it optimized back to fsat anyway.
This drops the check for the cap from gallium nine. While nine does have
a non-nir path, I think it's safe to assume that if you have SM3
texturing, you can do fsat.
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16823>
There's no way currently in virgl to determine whether it's running
above CPU or GPU. This info will be used to disable HW SELECT.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15765>
This is used for the old, buggy and slow GLSL IR loop unrolling
code. All drivers have now switched to the NIR unrolling code so
here we remove the CAP.
Reviewed-by: Alyssa Rosenzweig <alyssa@collabora.com>
Reviewed-by: Emma Anholt <emma@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16366>
Now that all consumers of GLSL use NIR, make the remaining drivers take
the path that relies on NIR to really do optimization.
nouveau steam shader-db runtime -6.69631% +/- 1.29235% (n=12).
No change on shader-db there.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16364>
The only interesting ones here were LOWER_IF_THRESHOLD (which previously
had connected to some lowering in GLSL that was broken in the face of side
effects), and FMA (which turned GLSL IR's fma() into TGSI_OPCODE_FMA
instead of MAD).
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8044>
This way we can make allow_draw_out_of_order true by default for all
apps, iff the driver allows it.
And allow_draw_out_of_order=false can still be used in drirc, for
apps that need this optim to be turned off.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Acked-By: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16139>
GL spec states that the stride for indirect multidraws:
* cannot be negative
* can be zero
* must be a multiple of 4
some drivers can't support strides which are not a multiple of the
size of the indirect struct being used, however, so rewrite those to
direct draws
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15963>
This cap is no longer TGSI specific, so let's rename it to reflect
reality.
Because the name got a bit vague when removing the TGSI-bits, let's add
some more details to the name.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Acked-by: Ian Romanick <ian.d.romanick@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15316>
This isn't specific to TGSI, so let's update the name to reflect
reality.
Because the name of the opcode was TGSI specific, let's pick a new one,
based on the naming of the PIPE_CAP_TEXTURE_QUERY_LOD cap.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Acked-by: Ian Romanick <ian.d.romanick@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15316>
Erik Faye-Lund
Emma Anholt
Lionel Landwerlin
Alyssa Rosenzweig
Tomeu Vizoso
Pavel Asyutchenko
Mike Blumenkrantz
Qiang Yu
Alyssa Rosenzweig
Marek Olšák
Timothy Arceri
Pierre-Eric Pelloux-Prayer