If alignement is 0, offets returned by
radv_cmd_buffer_upload_alloc() are always 0. These two
virtual addresses were pointing at the same location.
Cc: 18.3 19.0 <mesa-stable@lists.freedesktop.org>
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This fixes some CTS crashes with:
dEQP-VK.renderpass2.suballocation.attachment_write_mask.attachment_count_8.start_index_*
Ideally, we should check cmd_buffer->cs->max_dw because there is
likely enough space (the internal clear draws allocate space), but
keep that way for consistency.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This fixes a critical issue.
Cc: <mesa-stable@lists.freedesktop.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109575
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This removes some scalar loads from shaders, but it increases
the number of SET_SH_REG packets. This is currently basic but
it could be improved if needed. Inlining dynamic offsets might
also help.
Original idea from Dave Airlie.
29077 shaders in 15096 tests
Totals:
SGPRS: 1321325 -> 1357101 (2.71 %)
VGPRS: 936000 -> 932576 (-0.37 %)
Spilled SGPRs: 24804 -> 24791 (-0.05 %)
Code Size: 49827960 -> 49642232 (-0.37 %) bytes
Max Waves: 242007 -> 242700 (0.29 %)
Totals from affected shaders:
SGPRS: 290989 -> 326765 (12.29 %)
VGPRS: 244680 -> 241256 (-1.40 %)
Spilled SGPRs: 1442 -> 1429 (-0.90 %)
Code Size: 8126688 -> 7940960 (-2.29 %) bytes
Max Waves: 80952 -> 81645 (0.86 %)
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Outgoing dependencies (ie. external) should happen after the subpass.
This doesn't change anything for subpass resolves as we already
make sure that attachments are shader readable.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
That shouldn't change anything as we check if the last
subpass id is the final subpass.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This reworks how the depth stencil attachment is used for
simplicity. This also introduces radv_render_pass_compile()
helper that will be used for further optimizations.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Instead of doing them in radv_cmd_buffer_set_subpass().
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
To unify some code in BeginRenderPass() and NextSubpass().
Based on Intel ANV driver.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Instead of doing every time we emit cache flushes.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
It's invalid to emit a ZPASS_DONE event on the compute queue, and
the fence BO is unused on the compute queue (ie. we don't flush
CB or DB caches).
This saves some space in the upload BO.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This parameter is actually useless as the immediate value
can always be zero.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
DXVK often sets dynamic state without actually changing it.
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
It's common in some applications to bind a new graphics pipeline without
ending up changing any context registers.
This has a pipline have two command buffers: one for setting context
registers and one for everything else. The context register command buffer
is only emitted if it differs from the previous pipeline's.
v2: ensure late scissor emission is done when radv_emit_rbplus_state() is
called
v2: make use of cmd_buffer->state.workaround_scissor_bug
v3: rename "workaround_scissor_bug" to
"context_roll_without_scissor_emitted"
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
v2: rename "workaround_scissor_bug" to
"context_roll_without_scissor_emitted"
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Acked-by: Eric Engestrom <eric.engestrom@intel.com>
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
This caused random failures for two conditional rendering tests:
dEQP-VK.conditional_rendering.draw_clear.draw.update_with_rendering_discard
dEQP-VK.conditional_rendering.draw_clear.draw.update_with_rendering_no_discard
These wrote the predicate with the vertex shader, did a barrier and then
started the conditional rendering. However the cache flushes for the barrier
only happen on first draw, so after the predicate has been read.
Fixes: e45ba51ea4 "radv: add support for VK_EXT_conditional_rendering"
Reviewed-by: Dave Airlie <airlied@redhat.com>
The value depends on the number of samples.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
The driver needs to decompress all image layers if a fast
depth/color clear has been performed.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
If we gave this function 0 counter buffers, we'd still try and
access pCounterBuffers[0] as this check was incorrect.
Fixes crash with ext_transform_feedback-pipeline-basic-primgen
on zink on radv.
Fixes: 677b496b6 (radv: fix begin/end transform feedback with 0 counter buffers.)
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
It's somehow similar to the FCE predicate.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
User are encouraged to switch to LLVM 7.0 released in September 2018.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
After investigating on this, it appears that COND_WRITE doesn't
work correctly in some situations. I don't know exactly why does
it fail to update DB_Z_INFO.ZRANGE_PRECISION, but as AMDVLK
also uses COND_EXEC I think there is a reason.
Now the driver stores a new metadata value in order to reflect
the last fast depth clear state. If a TC-compat HTILE is fast cleared
with 0.0f, we have to update ZRANGE_PRECISION to 0 in order to
work around that hardware bug.
This fixes rendering issues with The Forest and DXVK and doesn't
seem to introduce any regressions.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108914
Fixes: 68dead112e ("radv: update the ZRANGE_PRECISION value for the TC-compat bug")
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
CP DMA can only be busy when the driver copies buffers. The
only affected Vulkan commands are vkCmdCopyBuffer() and
vkCmdUpdateBuffer() (because we fallback to a copy depending on
a threshold). Clear operations are currently not concerned
because the driver always syncs after the last DMA operation.
Per the spec, these two operations have to be externally
synchronized with VK_PIPELINE_STAGE_TRANSFER_BIT.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
HTILE is supported on these chips, not sure how I missed that.
This restores using PFP_SYNC_ME when LOAD_CONTEXT_REG is not used.
Fixes: f425d9ee74 ("radv: use LOAD_CONTEXT_REG when loading fast clear values")
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
This avoids syncing the Micro Engine. This is only supported
for VI+ currently. There is probably a way for using
LOAD_CONTEXT_REG on previous chips but that could be done later.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
If the user gives 0 counterBuffers then the driver should still
enable transform feedback on all targets. This changes the
driver to always enable xfb, and use counter buffers where
one is defined for the target in question.
Fixes: b4eb029062 (radv: implement VK_EXT_transform_feedback)
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
In order to handle pause/resume properly, the offset should
be added to the buffer binding not to the begin/end paths.
v2: don't add offset to size
Fixes ext_transform_feedback-alignment* under zink
Fixes: b4eb029062 (radv: implement VK_EXT_transform_feedback)
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
This implementation should work and potential bugs can be
fixed during the release candidates window anyway.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Since the CPU can read them we need to execute any GPU->CPU
flushes before the event is written.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108524
Fixes: f4e499ec79 "radv: add initial non-conformant radv vulkan driver"
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Samuel Pitoiset
Bas Nieuwenhuizen
Marek Olšák
Rhys Perry
Dave Airlie
Nicolai Hähnle