These extensions are good for Vulkan interop, so track them.
Signed-off-by: Jakob Bornecrantz <jakob.bornecrantz@collabora.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
This extension is effectively a backport of GLES3's internalformat
handling to GLES 1/2. It guarantees that sized internalformats specified
for textures and renderbuffers have at least the specified size stored.
That's a pretty minimal requirement, so I think it can be dummy_true and
exposed as a standard in Mesa.
As a side effect, it also allows GL_RGB565 to be specified as a texture
format, not just as a renderbuffer. Mesa had previously been allowing 565
textures, which angered DEQP in the absence of this extension being
exposed.
v2: Allow 2101010rev with sized internalformats even on GLES3, citing the
extension spec. Extend extension checks for GLES2 contexts exposing
with texture_float, texture_half_float, and texture_rg.
v3: Fix ALPHA/LUMINANCE/LUMINANCE_ALPHA error checking (GLES3 CTS
failures)
v4: Mark GL_RGB10 non-color-renderable on ES, fix A/L/LA errors on GLES2
with float formats.
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
This uses all the existing code to calculate lod values for mip linear
filtering. Though we'll have to disable the simplifications (if we know some
parts of the lod calculation won't actually matter for filtering purposes due
to mip clamps etc.). For better or worse, we'll also disable lod calculation
hacks (mostly should make a difference for cube maps) always - the issue with
per-pixel lod being difficult is mostly because we then have different mipmaps
needed for the actual texel fetch, which isn't a problem with lodq.
We still use approximation for the log2 - for that reason I believe the float
part of the lod is only accurate to about 4-5 bits (and one bit less with 1d
textures actually) which is hopefully good enough (though d3d10 technically
requires 6 bits - could use quadratic interpolation instead of linear to get
8 bits or so).
Since lodq requires unclamped lod, we also have to move some sampler key
calculations to texture sampling code - even if we know we're going to access
mipmap 0 we still have to calculate lod and apply lod_bias for lodq.
Passes piglit ARB_texture_query_lod tests (after having fixed the test).
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
This was implemented since forever, but not enabled.
It passes all piglit tests except one, arb_pipeline_statistics_query-frag.
The reason is that the test (for drawing a 10x10 rect) expects between
100 and 150 pixel shader invocations. But since llvmpipe counts this with
4x4 granularity (and due to the rect being 2 tris) we end up with 224
invocations. I believe however what llvmpipe is doing violates neither the
spirit nor the letter of the spec (our fragment shader granularity really
is 4x4 pixels, albeit we will bail out early on 2x2 or 4x2 (the latter
if AVX is available) granularity), the spec allows to count additional
invocations due to implementation reasons.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Semantically identical to the EXT version (whose string is still valid
for GLES), so rename the bit but expose both extension strings.
(Suggested by Ilia Mirkin and Ian Romanick.)
v3: Fix the entrypoint alias in GL4x.xml (Ilia)
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
The only difference from the EXT version is bumping the minmax to 16, so
just hit all the drivers at once.
v2: Fix driver names, add to 17.3 release notes (Ilia Mirkin)
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The driver supported this since way before the GL spec for it existed.
Just need to support both the per-stream and for all streams variants
(which are identical due to only supporting 1 stream).
Passes piglit arb_transform_feedback_overflow_query-basic.
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
The driver was supposed to support this since way before the GL spec for it
existed, albeit it was apparently broken, so fix and enable it.
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
ARB_polygon_offset_clamp and ARB_texture_filter_anisotropic look like
they'd be pretty trivial to wire up.
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
The OpenGL extension KHR_no_error is exposed since commit
d42d150ad2 by Timothy Arceri. Therefore it
should be marked as "started" in the features.txt
Signed-off-by: Kai Wasserbäch <kai@dev.carbon-project.org>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
This enables support on GM200+ for:
- GL_AMD_vertex_shader_layer
- GL_AMD_vertex_shader_layer_viewport_index
- GL_ARB_shader_viewport_layer_array
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
[lyude: add relnotes/TES cap]
Signed-off-by: Lyude <lyude@redhat.com>
[imirkin: move relnotes to right place, add features.txt]
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
v2 (Andreas Boll):
- Mark GL 4.1 as supported by i965/gen7+
- Mark GL_ARB_shader_precision as supported by i965/gen7+
- Update release notes
Reviewed-by: Andreas Boll <andreas.boll.dev@gmail.com>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
readInvocationARB() and readFirstInvocationARB() need SHFL.IDX
instruction which is introduced in Kepler.
Signed-off-by: Boyan Ding <boyan.j.ding@gmail.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Require LLVM 5.0 or later because LLVM 4.0 is easily fooled into
putting the lane select of llvm.amdgcn.readlane into a VGPR and then
fails to continue to compile.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
This extension was enabled in commit 40dd45d0c6 ("i965: Enable
ARB_shader_atomic_counter_ops") but the commit failed to update the
release notes or features.txt. The release notes ship has sailed, since
the commit was in 13.0.
At least, the extension is exported (gallium capability
PIPE_CAP_BUFFER_MAP_PERSISTENT_COHERENT is 1)
Signed-off-by: Gregory Hainaut <gregory.hainaut@gmail.com>
Acked-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Lars Hamre <chemecse@gmail.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
This extension adds new query types which can be used to detect overflow
of transform feedback buffers. The new query types are also accepted by
conditional rendering commands.
v3:
- s/gen7+/gen6+/ in the relnotes (Jordan Justen)
Signed-off-by: Rafael Antognolli <rafael.antognolli@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Most of them already redirected to https anyway, so we might as well
avoid the redirection and the security implications by linking directly
to the right protocol.
Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Brian Paul <brianp@vmware.com>
All of these have had support for the TGSI opcodes since before most of
the glsl compiler work landed.
Also update the docs accordingly, including the missing note about i965.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
We don't need to support all the color buffers for advanced blend, just
cb0. For Fermi, we use the special binding slots so that we don't
overlap with user textures, while Kepler+ gets a dedicated position for
the fb handle in the driver constbuf.
This logic is only triggered when a FBFETCH is actually present so it
should be a no-op most of the time.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
GL_ARB_vertex_attrib_64bit was the last piece missing.
v2: update docs (Jordan)
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
v2: update docs (Jordan)
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
The only reason we didn't previously enable this was the dependency on
OpenGL ES 3.1. These should have been enabled as soon as HSW got
stencil texturing. We also needed to fixup setting MaxViewports.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This extension allows the fragment shader to control whether values in
gl_SampleMaskIn[] reflect the coverage after application of the early
depth and stencil tests.
Signed-off-by: Plamena Manolova <plamena.manolova@intel.com>
Reviewed-by: Chris Forbes <chrisforbes@google.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This allows the driver to signal that it can't handle random
interleaving of attributes across buffers. This is required for
ARB_transform_feedback3, and it's initialized to whatever the previous
value of PIPE_CAP_STREAM_OUTPUT_PAUSE_RESUME was except for nv50 where
it is disabled. Note that the proprietary drivers never expose
ARB_transform_feedback3 on any GT21x's (where nouveau previously did),
and after some effort I was unable to get it to work.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
V2. add i965/hsw+ to list
V3. rebased on master.
V4. 'DONE' -> 'DONE ()'.
V5. remove i965/hsw+ from list :/
Signed-off-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Jakob Bornecrantz
Eric Anholt
Matt Turner
Roland Scheidegger
Adam Jackson
Ilia Mirkin
Jordan Justen
Nicolai Hähnle
Samuel Pitoiset
Nanley Chery
Kai Wasserbäch
Francisco Jerez
Samuel Iglesias Gonsálvez
Boyan Ding
Tim Rowley
Bruce Cherniak
Gregory Hainaut
Lars Hamre
Rafael Antognolli
Kenneth Graunke
Eric Engestrom
Brian Paul
Juan A. Suarez Romero
Alejandro Piñeiro
Ian Romanick
Iago Toral Quiroga
Romain Failliot
Plamena Manolova
Edward O'Callaghan