In the future, we plan on using this method to resolve images whose
surface state fast-clear value is dynamically updated during command
buffer execution. Start using it now for testing and to reduce churn
later on.
Signed-off-by: Nanley Chery <nanley.g.chery@intel.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This will be used in the next patch.
v2:
- Omit BLORP_BATCH_NO_EMIT_DEPTH_STENCIL (Jason Ekstrand)
- Update commit message.
Signed-off-by: Nanley Chery <nanley.g.chery@intel.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Splitting out these fields will make the color buffer transitioning
function simpler when it gains more features.
v2: Remove unintended blank line (Iago Toral)
Signed-off-by: Nanley Chery <nanley.g.chery@intel.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
For 3D image subresources undergoing a layout transition via
PipelineBarrier, we increase the number of fast-cleared layers to match
the intended behaviour of KHR_maintenance1. When such subresources
undergo layout transitions between subpasses, we don't do this to avoid
failing incorrect CTS tests. Instead, unify the behaviour in both
scenarios, and wait for the CTS tests to catch up. See CL 1111 for the
test fix and Vulkan issue #849 for more information.
On SKL+, this causes 3 test failures under:
dEQP-VK.pipeline.render_to_image.3d.*
v2: Add a reference to the Vulkan issue (Iago Toral).
Signed-off-by: Nanley Chery <nanley.g.chery@intel.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com> (v1)
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Make the function take in an image instead of an image view. This
enables us to record relocations for surfaces states created outside of
the anv_CreateImageView path.
v2 (Jason Ekstrand):
- Use image->offset instead of surf_offset in aux_offset calculation.
Signed-off-by: Nanley Chery <nanley.g.chery@intel.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reflect the fact that an image view or subresource range with the color
aspect cannot have any other aspect.
Signed-off-by: Nanley Chery <nanley.g.chery@intel.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
v2:
- Check for aux levels in layer helper (Jason Ekstrand)
- Don't assert aux is present, return 0 if it isn't.
- Use the helpers.
v3:
- Make the helpers aspect-agnostic (Jason Ekstrand)
- Drop anv_image_has_color_aux()
Signed-off-by: Nanley Chery <nanley.g.chery@intel.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com> (v2)
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
v2 (Jason Ekstrand):
- Remove Vulkan-specific terminology from the commit title.
- Replace '== 7' with '<= 7' to hint that this is a new feature on BDW+.
Signed-off-by: Nanley Chery <nanley.g.chery@intel.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com> (v1)
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Currently a resource flush may trigger a self resolve, even if a scanout buffer
exists, but is up to date. If a scanout buffer exists we only ever want to
flush the resource to the scanout buffer. This fixes a performance regression.
Fixes: dda956340c (etnaviv: resolve tile status when flushing resource)
Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Based on a patch from Wladimir J. van der Laan and untested due
to lack of hardware. Binary blob emits those formats if GPU supports
HALTI1 (faked with ibvivhook).
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Wladimir J. van der Laan <laanwj@gmail.com>
Passes texwrap GL_ARB_texture_rg piglit (with faked full texture rg support).
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Wladimir J. van der Laan <laanwj@gmail.com>
Passes all ext_texture_swizzle piglits.
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-By: Wladimir J. van der Laan <laanwj@gmail.com>
Fix regression of "no rendering" on simple apps like glxgears by
setting an explicit full surface clear_rect when scissor is not
enabled.
This regressed with commit 00173d91 "st/mesa: don't set 16
scissors and 16 viewports if they're unused" due to an assumption
that a default scissor rect is always set, which was the case prior
to this optimization.
Reviewed-by: Tim Rowley <timothy.o.rowley@intel.com>
Some combinations of c++ compilers and standard libraries had problems
with the string::replace code we were using previously.
This should fix the travis-ci system.
Tested-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>
The hardware doesn't support it, so we just interpolate all array elements
and then use indirect indexing on the resulting vector.
Clearly, this is not very efficient. There is an argument to be had for
adding if/else, or perhaps even pulling the data out of LDS directly.
Both don't really seem worth the effort, considering that it seems nobody
actually uses this feature.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
In swrastGetDrawableInfo, set *x and *y, not just *w and *h;
this fixes a crash later in drisw_update_tex_buffer when the
(formerly) uninitialized x and y values are used to construct
an address in a call to llvmpipe_transfer_map.
Fixes crash in Piglit test
"spec@egl 1.4@eglcreatepbuffersurface and then glclear"
(<piglit dir>/bin/egl-create-pbuffer-surface -auto)
that occurred intermittently, e.g. when the uninitialized x and y in
drisw_update_tex_buffer just happened to contain absurd non-zero values.
v2: Initialize in case if function succeeds or fails, just like *w/*h.
Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Ben Crocker <bcrocker@redhat.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
The function _eglError() already explicitly returns EGL_FALSE,
explicitly to simplify the callers. Make use of it.
While EGL_FALSE is numerically identical to false, NULL, EGL_NO_FOO,
storage is not the same so we cannot use it for "everything".
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Function cannot fail and always returns true.
v2: Inline the one line function in the header
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
xfb only applies to the latest stage before the fragment shader, so
there is no need to invoke it in the fragment shader.
Fixes:
KHR-GL45.enhanced_layouts.xfb_stride_of_empty_list
KHR-GL45.enhanced_layouts.xfb_stride_of_empty_list_and_api
v2: do reset only if shaders provide an explicit stride
v3: do not call link_xfb_stride_layout_qualifiers() for fragment shaders
(Timothy)
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
…and print error in such case. Which probably is not a rare event btw
because fopen doesn't expand ~ to $HOME.
Also get rid of unused "bool ret" variable.
Signed-off-by: Constantine Kharlamov <Hi-Angel@yandex.ru>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=100785
v2: I was too much twiddling whether to initialize nsys_inputs at the beginning of shader initialization or for allocation of system values, and by the time I decided to go with the first one, I forgot to change it back.
Signed-off-by: Constantine Kharlamov <Hi-Angel@yandex.ru>
Signed-off-by: Dave Airlie <airlied@redhat.com>
On evergreen we can route vertex fetches via the texture cache,
and this is required for some images support. So add support
to the asm builder for it.
Signed-off-by: Dave Airlie <airlied@redhat.com>
This was found during writing the images code, we need to
make sure we route the correct index register.
Signed-off-by: Dave Airlie <airlied@redhat.com>
for HUD integration in following commits. This valuable profiling data
will allow us to see on the HUD how well glthread is able to utilize
parallelism. This is better than benchmarking, because you can see
exactly what's happening and you don't have to be CPU-bound.
u_threaded_context has the same counters.
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
This mirrors exactly how u_threaded_context works.
If you understand this, you also understand u_threaded_context.
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>