Although it works, it's not the correct thing to do.
v2: Rebase
v3: Rebase
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Tobias Droste <tdroste@gmx.de> (v1)
LLVM_BINDIR is completely unused while others such as LLVM_LIBDIR are
used only internally. In the latter case there's no need to AC_SUBST it.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Tobias Droste <tdroste@gmx.de>
Make sure that HAVE_LLVM compiler define is only set if LLVM is
actually used.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99010
Cc: "17.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Tobias Droste <tdroste@gmx.de>
v2 [Emil] fold within the existing conditional
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Set FOUND_LLVM only when LLVM is present (checking for exact version/etc
is deferred) and use enable-gallium-llvm to indicate the global LLVM
status.
Renaming the latter is not appropriate for stable patches, so we'll
address it with a later commit.
Loosely based on work by Tobias.
v2: Check FOUND_LLVM if enable_gallium_llvm is set.
Cc: Dave Airlie <airlied@redhat.com>
Cc: "17.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Tobias Droste <tdroste@gmx.de>
... to where it's applicable.
Since we effectively made --enable-gallium-llvm mean --enable-llvm with
earlier commits, we need to move the requirement to guard the compnents
added for the LLVM draw.
Otherwise we'll error (as below) when building RADV w/o gallium drivers.
configure: error: --enable-gallium-llvm is required when building radv
v2: Don't remove but move the dependency (Tobias).
Cc: Dave Airlie <airlied@redhat.com>
Cc: "17.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Tobias Droste <tdroste@gmx.de>
With this change we effectively require --enable-gallium-llvm when
building RADV. This should be perfectly safe since the gallium radeonsi
driver already explicitly requires it.
The "gallium" part in --enable-gallium-llvm is about to be removed soon
(not in stable), but until then make sure that things can build.
To reflect the requirement (as opposed to check previously) we rename
llvm_check_version_for to llvm_require_version
Cc: Dave Airlie <airlied@redhat.com>
Cc: "17.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Tobias Droste <tdroste@gmx.de>
Drop the gallium prefix since we're about it use it throughout the
configure.
Note we do want to check for enable_gallium_llvm check since (as
explicitly requested) the toggle should mean --enable-llvm. Latter of
which to be resolved with later patches.
Cc: Dave Airlie <airlied@redhat.com>
Cc: "17.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Tobias Droste <tdroste@gmx.de>
This is actually not needed because the version is checked later.
Around line 2380
if test "x$enable_gallium_llvm" == "xyes"; then
llvm_check_version_for $LLVM_REQUIRED_GALLIUM "gallium"
llvm_add_default_components "gallium"
fi
Cc: "17.0" <mesa-stable@lists.freedesktop.org>
Cc: Tobias Droste <tdroste@gmx.de>
Signed-off-by: Tobias Droste <tdroste@gmx.de>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com> (v1)
v2: [Emil Velikov: rebase/respin series order]
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
With next commits we'll require --enable-gallium-llvm (en route to a
greater good later on) for RADV. The latter is required to ensure that
as otherwise we'll fail to build.
Cc: Dave Airlie <airlied@redhat.com>
Cc: "17.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Tobias Droste <tdroste@gmx.de>
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Chad Versace <chadversary@chromium.org>
Not wired up (not referenced in any SUBDIR), leading to `make distcheck'
failure.
Fixes: d77fa310ed "ilo: EOL drop unmaintained gallium drv from buildsys"
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
There were two "libglvnd configuration" section in the squashed commit
that added libglvnd support, while only one in the original libglvnd
branch. A following commit moves one of them downwards. Now remove the
upper "older" one and move GL_LIB name decision downwards after the new
libglvnd configuration section.
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Boyan Ding <boyan.j.ding@gmail.com>
v2: Rebase on top of ILO removal.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
It's unlikely that any of the additions come as a suprise to anyone
i915, nouveau, radeon, r200. Regardless, state clearly what's
available.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Chad Versace <chadversary@chromium.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
This is no longer actively maintained and is just
accumulating bitrot.
Signed-off-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Acked-by: Chia-I Wu <olvaffe@gmail.com>
The intent of the libdrm_$driver version limits has always been to not
burden the "other" drivers with updating their libdrm unless really
necessary. Unfortunately the configure script erroneously only checked
the driver-specific bit and not the generic bit of libdrm as well. Fix
this.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Chad Versace <chadversary@chromium.org>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Although this might come from somewhere else require it explicitly.
Reviewed-by: Chad Versace <chadversary@chromium.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Required to implement EGL_ANDROID_native_fence_sync on i965.
Specifically, i965 needs drm_intel_gem_bo_exec_fence(),
I915_PARAM_HAS_EXEC_FENCE, and libsync.h.
Reviewed-by: Rafael Antognolli <rafael.antognolli@intel.com>
Tested-by: Rafael Antognolli <rafael.antognolli@intel.com>
Acked-by: Kenneth Graunke <kenneth@whitecape.org>
Analogous to what we do for the dri and gallium drivers.
Cc: 17.0 13.0 <mesa-stable@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.velikov@colllabora.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Analogous to previous commit(s), with a minor detail - here we set the
macros when building both C and C++ sources.
Resolving that is a more challenging task that we'll sort out another
day.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
b3119a3 introduced a strict LLVM requirement for r300 on all
architectures and thus configure fails on architectures where LLVM is
not available or buggy.
r300 doesn't strictly require LLVM, but for performance reasons we
highly recommend LLVM usage. So require it at least on x86 and x86_64
architectures as we have done before b3119a3.
Fixes: b3119a3 ("configure.ac: Check gallium LLVM version in gallium_require_llvm")
Cc: 17.0 <mesa-stable@lists.freedesktop.org>
Signed-off-by: Andreas Boll <andreas.boll.dev@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Otherwise we'll get a lovely message as below:
"require_dri_shared_libs_and_glapi: command not found"
Cc: Steven Newbury <steve@snewbury.org.uk>
Reported-by: Steven Newbury <steve@snewbury.org.uk>
Fixes: da410e6afa "configure: explicitly require shared glapi for
enable-dri"
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Tested-by: Steven Newbury <steve@snewbury.org.uk>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Earlier commit imported a SHA1 implementation and relaxed the SHA1 and
disk cache handling, broking the Windows builds.
Restrict things for now until we get to a proper fix.
Fixes: d1efa09d34 "util: import sha1 implementation from OpenBSD"
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
At the moment we support 5+ different implementations each with varying
amount of bugs - from thread safely problems [1], to outright broken
implementation(s) [2]
In order to accommodate these we have 150+ lines of configure script and
extra two configure toggles. Whist an actual implementation being
~200loc and our current compat wrapping ~250.
Let's not forget that different people use different code paths, thus
effectively makes it harder to test and debug since the default
implementation is automatically detected.
To minimise all these lovely experiences, import the "100% Public
Domain" OpenBSD sha1 implementation. Clearly document any changes needed
to get building correctly, since many/most of those can be upstreamed
making future syncs easier.
As an added bonus this will avoid all the 'fun' experiences trying to
integrate it with the Android and SCons builds.
v2: Manually expand __BEGIN_DECLS/__END_DECLS and document (Tapani).
Furthermore it seems that some games (or surrounding runtime) static
link against OpenSSL resulting in conflicts. For more information see
the discussion thread [3]
Bugzilla [1]: https://bugs.freedesktop.org/show_bug.cgi?id=94904
Bugzilla [2]: https://bugs.freedesktop.org/show_bug.cgi?id=97967
[3] https://lists.freedesktop.org/archives/mesa-dev/2017-January/140748.html
Cc: Mark Janes <mark.a.janes@intel.com>
Cc: Vinson Lee <vlee@freedesktop.org>
Cc: Tapani Pälli <tapani.palli@intel.com>
Cc: Jonathan Gray <jsg@jsg.id.au>
Tested-by: Jonathan Gray <jsg@jsg.id.au>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Acked-by: Tapani Pälli <tapani.palli@intel.com> (v1)
Acked-by: Jason Ekstrand <jason@jlekstrand.net> (v1)
Current code warns out in such cases and falls-back to either static or
shared. That can be easily missed amongst the volume produced by our
configure script.
Replace the warning with an error such that one gets direct feedback
when they're doing something wrong.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
We've been using and depending on it for at least a couple of years.
Make it obvious and error out, should one opt for it.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
We have them for local purposes in configure, where we can use their
direct dependency.
With the only remaining instance in the makefile(s) being always true,
as it can be seen in the configure snippet.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Both libraries implicitly require shared GLAPI which in itself mandates
shared libraries.
Stop pretending that one can use it and error out at configure stage.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
We should be using LIBS rather than the LDFLAGS variable. Furthermore
try to keep the linking to the final stage, rather than intermetent
static library.
Cc: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
We must make sure that xserver has an equivalent one-line
change to its configure.ac as the glx/glapi headers get copied over.
Then again, xserver does _not_ seem to set HAVE_ALIAS to begin with so
one might want to look into that first.
Cc: Adam Jackson <ajax@redhat.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Currently we have two macros - HAVE_ALIAS and GLX_ALIAS_UNSUPPORTED.
To make it even better former of which is explicitly cleared in some
cases while not in others.
Clear all that up by using a single macro properly set during configure.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
This reverts changes 903eb09b5fb78d47d0f8a4bdf826a113ca2aff40..1a0aa468f354f0ee94dd383cd40ae915584624aa:
Tobias Droste (5):
configure.ac: Rename MESA_LLVM to FOUND_LLVM
configure.ac: Only set LLVM_LIBS if LLVM is used
configure.ac: Only define HAVE_LLVM if LLVM is used
configure.ac: Set and use HAVE_GALLIUM_LLVM define
configure.ac: Don't check LLVM version in gallium_require_llvm
They break scons build, and I'm not convinced this is the right fix. In
particular changing HAVE_LLVM in the C code is something I'd rather
avoid no matter what. So it's better to discuss without the pressure of
broken builds.
When compiling LLVM headers, including llvm-config.h, we need to respect
LLVM_CFLAGS. This is especially crucial if LLVM is located in a
non-standard location and it happens that llvm-config.h includes another
header. In such case the detection would fail due to missing header,
because the path is provided in LLVM_CFLAGS.
Let's add LLVM_CFLAGS to global CFLAGS for the time of detection and then
restore the original flags, as done in other places of the script.
Signed-off-by: Tomasz Figa <tfiga@chromium.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
This is actually not needed because the version is checked later.
Line 2609:
if test "x$enable_gallium_llvm" == "xyes"; then
llvm_require_version $LLVM_REQUIRED_GALLIUM "gallium"
llvm_add_default_components "gallium"
HAVE_GALLIUM_LLVM=xyes
DEFINES="${DEFINES} -DHAVE_GALLIUM_LLVM"
fi
Signed-off-by: Tobias Droste <tdroste@gmx.de>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Gallium code used HAVE_LLVM to check if it needs to compile code for
LLVM in header and source files.
With the new logic HAVE_LLVM is always set. Use extra define to figure
out if LLVM is used.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99010
Signed-off-by: Tobias Droste <tdroste@gmx.de>
Make sure that HAVE_LLVM compiler define is only set if LLVM is
actually used.
Signed-off-by: Tobias Droste <tdroste@gmx.de>
v2 [Emil] fold within the existing conditional
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
This renames llvm_check_version_for to llvm_require_version and let it
set a variable to mark that LLVM will be used.
Use this to make a usefull configure output and to only check if the
libs are found in LLVM if it is actually used.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99010
Signed-off-by: Tobias Droste <tdroste@gmx.de>
This renames MESA_LLVM to FOUND_LLVM and updates the config.log report
to say if LLVM is found or not, to make clear that this does not mean
that it is used.
There are no MESA_LLVM users so drop the AC_SUBST.
v2 [Emil]
- Polish test: -a over && test, = over ==, unquiote xyes
- other ?
Signed-off-by: Tobias Droste <tdroste@gmx.de>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
dri3 allows us to send handle of a texture directly to X
so this patch allows a state tracker to directly send its
texture to X to be used as back buffer and avoids extra
copying
v2: use clip width/height to display a portion of the surface
v3: remove redundant variables, fix wrapping, rename variables
handle vaapi path
v3.1: we need clip_width/height for every frame so we don't need
to maintain it for each buffer instead use a global variable
v4: In case of single gpu we can cache the buffers as applications
use constant number of buffer and we can avoid calls to present
extension for every frame
Reviewed and Suggested-by: Leo Liu <leo.liu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Tested-by: Andy Furniss <adf.lists@gmail.com>
Signed-off-by: Nayan Deshmukh <nayan26deshmukh@gmail.com>
When EGL is used on some other thread than the thread that drives the
main wl_display queue, the Wayland EGL dri2 implementation is
vulnerable to a race condition related to display round trips and global
object advertisements.
The race that may happen is that after after a proxy is created, but
before the queue is set, events meant to be emitted via the yet to be
set queue may already have been queued on the wrong queue.
In order to make it possible to avoid this race, wayland 1.11
introduced new API that allows creating a proxy wrapper that may be used
as the factory proxy when creating new proxies via Wayland requests. The
queue of a proxy wrapper can be changed without effecting what queue
events emitted by the actual proxy will be queued on, while still
effecting what default queue proxies created from it will have.
By introducing a wl_display proxy wrapper and using this when performing
round trips (via wl_display_sync()) and retrieving the global objects (via
wl_display_get_registry()), the mentioned race condition is avoided.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Daniel Stone <daniels@collabora.com>
Changes from V1 -> V2:
- updated Copyright
- added $(top_srcdir)/src/gallium/winsys to include path (suggested by Emil)
- adapted driver to new renderonly API
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
This driver supports a wide range of Vivante IP cores like GC880,
GC1000, GC2000 and GC3000.
Changes from V1 -> V2:
- added missing files to actually integrate the driver into build system.
- adapted driver to new renderonly API
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Wladimir J. van der Laan <laanwj@gmail.com>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
Mesa requires ax_pthread_ok = yes, thus we can fold/rewrite the
conditional to follow the more common "if test" pattern.
No functional change intended.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
In the (not too) distant future we'd want to remove this option and
effectively drop the other codepath(s) we have in our dispatch.
Linux distributions have been using --enable-glx-tls for a number of
years. Some/most BSD platforms still don't support this, yet this should
serve as an encouragement to move things forwards.
Note: we had many bug reports were opened due to the wrong default
option. See the list below for details.
v2:
- Correct default option in help string (Andreas)
- Add bugzilla references.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=70623
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=72902
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=73778
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=89043
Cc: Jean-Sébastien Pédron <dumbbell@FreeBSD.org>
Cc: Jonathan Gray <jsg@jsg.id.au>
Cc: mesa-maintainers@lists.freedesktop.org
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Andreas Boll <andreas.boll.dev@gmail.com>
This makes sure that we handle LLVM minor version >= 10 correctly.
Signed-off-by: Tobias Droste <tdroste@gmx.de>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Major and minor version are included in the header file since LLVM
version 3.1.0. Since the minimal required version is 3.3.0 we can
remove the workaround if no values for major/minor were found in the
header.
Since LLVM 3.6.0 the patch version is inside the header file of LLVM.
Only radeon drivers need the patch version and they depend on
LLVM >= 3.6.0, so this is safe too.
Signed-off-by: Tobias Droste <tdroste@gmx.de>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Consolidate the required LLVM versions at the top where the other
versions for dependencies are listed.
v5:
Splitted out separate changes (see patch 19 and 20)
Signed-off-by: Tobias Droste <tdroste@gmx.de>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
LLVM components are only added when LLVM is needed.
This means gallium adds this as soon as "--enable-gallium-llvm"
is "yes" and radv + opencl add it explicitly.
v5:
Removed hunk that disabled LLVM for gallium if it was not found.
Signed-off-by: Tobias Droste <tdroste@gmx.de>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
This moves the LLVM check for radv to the corresponding driver section.
No functional change.
Signed-off-by: Tobias Droste <tdroste@gmx.de>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
This moves llvm_set_environment_variables to its final destination
and moves all the LLVM AC_SUBST() below the function call.
No functional change.
Signed-off-by: Tobias Droste <tdroste@gmx.de>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
The LLVM checks can be anywhere below line 1161 now.
Move the openCL LLVM checks to the section with the other openCL checks.
No functional change.
Signed-off-by: Tobias Droste <tdroste@gmx.de>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
[Emil Velikov: s/ipos/ipo/, drop "yes" argument from llvm_add_component]
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
This moves the function to get the LLVM environment variables higher
in the file. It still needs to be below the "--enable-opencl" because
it uses $enable_opencl.
It can be called without condition now as it only throws errors if
openCL is enabled.
v5:
HAVE_MESA_LLVM is only used for gallium. Rename it to HAVE_GALLIUM_LLVM.
In order to only link LLVM when it is needed, HAVE_GALLIUM_LLVM is only
set if "$enable-gallium-llvm" is yes.
Signed-off-by: Tobias Droste <tdroste@gmx.de>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
No need for an additional function here.
Use the same style for LLVM checks as the other drivers
(e.g. r300, llvmpipe) that don't need a load of other checks.
Instead of open conding the LLVM version check, use the
function used by other drivers.
"enable_gallium_llvm" is checked by gallium_require_llvm().
Signed-off-by: Tobias Droste <tdroste@gmx.de>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
This moves the LLVM version check to the helper function
gallium_require_llvm() and uses the llvm_check_version_for() helper
instead of open conding the LLVM version check.
gallium_require_llvm is functionally the same as before, because
"enable_gallium_llvm" is only set to "yes" if the host cpu is x86:
if test "x$enable_gallium_llvm" = xauto; then
case "$host_cpu" in
i*86|x86_64|amd64) enable_gallium_llvm=yes;;
esac
fi
This function is also only called now when needed.
Before this patch llvmpipe would call this as soon as LLVM is
installed. Now it only gets called by llvmpipe if gallium
LLVM is actually enabled (i.e. only on x86).
Both reasons mentioned above remove the need to check host cpu
in the gallium_require_llvm function.
Signed-off-by: Tobias Droste <tdroste@gmx.de>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
There are no non gallium r300 and r600 drivers anymore.
No need to explicilty mention gallium here.
Just cosmetics, no functional change.
Signed-off-by: Tobias Droste <tdroste@gmx.de>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
This is handled by "llvm_check_version_for" for openCL.
Signed-off-by: Tobias Droste <tdroste@gmx.de>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
There's no harm in always searching llvm-config.
This way it's available as soon as possible for all functions.
Signed-off-by: Tobias Droste <tdroste@gmx.de>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
This just moves code around so that all LLVM related stuff is at the
top of the file in the correct order.
No functional change.
Signed-off-by: Tobias Droste <tdroste@gmx.de>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
A function with the LLVM version checked is moved to the top.
The function is called where the old code was.
No functional change.
Signed-off-by: Tobias Droste <tdroste@gmx.de>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
[Emil Velikov: s/ipos/ipo/, drop "yes" argument from llvm_add_component]
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Use the new helper function to add LLVM targets and components.
The components are added one by one to later find out which component
is missing in case there is one.
Signed-off-by: Tobias Droste <tdroste@gmx.de>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
[Emil Velikov: s/ipos/ipo/, drop "yes" argument from llvm_add_component]
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Add functions to add and check targets/components.
Not used in this patch.
Signed-off-by: Tobias Droste <tdroste@gmx.de>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
This way LLVM_CONFIG can bet set from an env variable if it's outside
the $llvm_prefix.
This is not a must, but it helps testing.
Signed-off-by: Tobias Droste <tdroste@gmx.de>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
This pulls amd/common build rules into upper level makefile,
along with amd/addlib which is already there.
v2: [Emil Velikov]
- Move NEED_RADEON_LLVM conditional, drop amd/common from SUBDIRS
- Drop AM_ from common_libamd_common_la*
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
It's not dependent on GLSL and it can be useful for shader caches that don't
deal with GLSL.
v2: address review comments
v3: keep the other 3 lines in configure.ac
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
It's possible to build Mesa for Android using the traditional
autotools workflow [1]. ChromiumOS fetches Android prebuilts and
puts them in a sysroot. We now want to use pkg-config to specify
the location of system headers and libraries [2].
To enable this, let's add the required pkg-config checks and link
against them.
[1] https://developer.android.com/ndk/guides/standalone_toolchain.html
[2] https://chromium-review.googlesource.com/#/c/403237/
v2: Bundle pkg-config checks together (Emil)
v3: Provide further context on standalone NDK Mesa build (Emil)
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
In Android, the pthreads libs are in bionic. When building
Mesa for Android with the autotools workflow, we shouldn't
set -lpthread or -pthread.
[Emil Velikov]
Other platforms could use a similar fix, although that is left as
separate exercise.
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
This reverts commit a39ad18593.
The commit aims to address "missing" -L/foo/bar during linking stage. At
the same time it doesn't add the -L and yet the LLVM_LDFLAGS [which
provide -L/foo/bar] are already used throughout.
Seems like something pretty unique (broken?) on my end. Since the commit
introduces issues (due to the missing -L) revert until we get to the
root of it (PEBKAC or a genuine issue).
Currently if one uses a non-default prefix, the path won't get
propagated and we'll fail at link-time.
A very quick and easy example is to install to /usr/local.
At this point, llvm-config will be picked even without the
--with-llvm-prefix, but regardless of the latter linking will fail.
Currently people can workaround that via LD_LIBRARY_PATH.
Cc: "12.0 13.0" <mesa-stable@lists.freedesktop.org>
Cc: Tom Stellard <thomas.stellard@amd.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
since GBM is enabled by default, this is also enabled by default
the whitespace changes remove tabs
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
This moves the shared code to a common subdirectory
and makes anv linked to that code instead of the copy
it was using.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Rather than having 4-5 places which do the explicit check/message just
polish the gallium helper and use it everywhere.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Axel Davy <axel.davy@ens.fr>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Previously it was used to differentiate between the different codepaths
in the loader. Although strictly speaking the (core) of the loader is
only used when a hardware device is available. The latter of which in
itself requires libdrm (one of the codepaths available).
That said, all the configure toggles which relate to enabling/using hw
device should attribute and require libdrm, so there's no need to keep
this code around.
With this gallium_require_drm_loader becomes an empty stub, so nuke that
one as well.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Axel Davy <axel.davy@ens.fr>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Effectively everyone with actual hardware and/or requesting the
"device_name" requires a working libdrm. Thus they could/should already
be using the (now only) codepath.
Apart from the code simplification, we can slim down our configure.ac
even further. But that will be done in separate patch(es).
Cc: Gary Wong <gtw@gnu.org>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Axel Davy <axel.davy@ens.fr>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
As of last commit nothing in mesa depends on libudev.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Axel Davy <axel.davy@ens.fr>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
With follow on work, we'll untangle and simplify all the different
codepaths in loader. Then again, we forget to set have_pci_id when
libdrm is present (one of the codepaths available).
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Axel Davy <axel.davy@ens.fr>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Embed the xml files into the binary, so aubinator can be used from any
location.
v2: Split generation packing into another patch (Jason)
Check for xxd (Jason)
v3: Fix out of tree builds (Jason)
Generate custom variable name rather than names generated by xxd
(Lionel)
v4: Move generated _xml.h files to genxml/ (Sirisha)
v5: Remove newline from makefile (Jason)
v6: Add comment on gen*_xml.h creation (Jason)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This squashes all the radv development up until now into
one for merging.
History can be found:
https://github.com/airlied/mesa/tree/semi-interesting
This requires llvm 3.9 and is in no way considered
a conformant vulkan implementation. It can run a number
of vulkan applications, and supports all GPUs using
the amdgpu kernel driver.
Thanks to Intel for providing anv and spirv->nir,
and Emil Velikov for reviewing build integration.
Parts of this are:
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Acked-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Authors: Bas Nieuwenhuizen and Dave Airlie
Signed-off-by: Dave Airlie <airlied@redhat.com>
This fixes a problem where GL headers would only get installed if
glx was enabled. So if osmesa was enabled but not glx, then the
GL headers required by osmesa would be missing from the install.
v2: Dropped unneeded mesa_glinterop.h redundant osmesa.h install
Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Chuck Atkins <chuck.atkins@kitware.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
This is motivated by the fact that p_atomic_read and p_atomic_set may
somewhat surprisingly not do the right thing in the old version: while
stores and loads are de facto atomic at least on x86, the compiler may
apply re-ordering and speculation quite liberally. Basically, the old
version uses the "relaxed" memory ordering.
The new ordering always uses acquire/release ordering. This is the
strongest possible memory ordering that doesn't require additional
fence instructions on x86. (And the only stronger ordering is
"sequentially consistent", which is usually more than you need anyway.)
I would feel more comfortable if p_atomic_set/read in the old
implementation were at least using volatile loads and stores, but I
don't see a way to get there without typeof (which we cannot use here
since the code is compiled with -std=c99).
Eventually, we should really just move to something that is based on
the atomics in C11 / C++11.
Acked-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
V8: Feedback based on peer review
convert if block into a switch
Constify some func args
V7: Increase precision when measuring lmsensors volts
Flatten patch series.
V6: Feedback based on peer review
Simplify sensor initialization (arg passing).
Constify some func args
V5: Feedback based on peer review
Convert sprintf to snprintf
Convert char * to const char *
int arg converted to bool
Func changes to take a filename vs a larger struct.
Omit the space between '*' and the param name.
V4: Merged with master as of 2016/9/27 6pm
V3: Flatten the entire patchset ready for the ML
V2: Additional seperate patches based on feedback
a) configure.ac: Add a comment related to libsensors
b) HUD: Disable Block/NIC I/O stats by default.
Implement configuration option --enable-gallium-extra-hud=yes
and enable both statistics when this option is enabled.
c) Configure.ac: Minor cleanup to user visible configuration settings
d) Configure.ac: HUD stats - build system improvements
Move the -lsensors out of a deeper Makefile, bring it into the configure.ac.
Also, rename a compiler directive to more closely follow the standard.
V1: Initial release to the ML
Three new features:
1. Disk/block I/O device read/write stats MB/ps.
2. Network Interface RX/TX transfer statistics as a percentage
of the overall NIC speed.
3. lmsensor power, voltage and temperature sensors.
The lmsensor changes makes a dependency on libsensors so support
for the change is opt out by default.
Signed-off-by: Steven Toth <stoth@kernellabs.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
This code provides for an on-disk cache of objects. Objects are stored
and retrieved via names that are arbitrary 20-byte sequences,
(intended to be SHA-1 hashes of something identifying for the
content). The directory used for the cache can be specified by means
of environment variables in the following priority order:
$MESA_GLSL_CACHE_DIR
$XDG_CACHE_HOME/mesa
<user-home-directory>/.cache/mesa
By default the cache will be limited to a maximum size of 1GB. The
environment variable:
$MESA_GLSL_CACHE_MAX_SIZE
can be set (at the time of GL context creation) to choose some other
size. This variable is a number that can optionally be followed by
'K', 'M', or 'G' to select a size in kilobytes, megabytes, or
gigabytes. By default, an unadorned value will be interpreted as
gigabytes.
The cache will be entirely disabled at runtime if the variable
MESA_GLSL_CACHE_DISABLE is set at the time of GL context creation.
Many thanks to Kristian Høgsberg <krh@bitplanet.net> for the initial
implementation of code that led to this patch. In particular, the idea
of using an mmapped file, (indexed by a portion of the SHA-1), for the
efficent implementation of cache_has_key was entirely his
idea. Kristian also provided some very helpful advice in discussions
regarding various race conditions to be avoided in this code.
Signed-off-by: Timothy Arceri <timothy.arceri@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Needed to successfully link llvmpipe or swr when using shared llvm libs
built with inteljitevents enabled.
v2: Make adding inteljitevents component global rather than just
llvmpipe/swr, since libgallium will have a symbol dependency.
Cc: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Structurally, this is very similar to the existing Apple-DRI code, except I
have chosen to implement this using the __GLXDRIdisplay, etc. vtables (as
suggested originally in [1]), rather than a maze of ifdefs. This also means
that LIBGL_ALWAYS_SOFTWARE and LIBGL_ALWAYS_INDIRECT work as expected.
[1] https://lists.freedesktop.org/archives/mesa-dev/2010-May/000756.html
This adds:
* the Windows-DRI extension protocol headers and the windowsdriproto.pc
file, for use in building the Windows-DRI extension for the X server
* a Windows-DRI extension helper client library
* a Windows-specific DRI implementation for GLX clients
The server is queried for Windows-DRI extension support on the screen before
using it (to detect the case where WGL is disabled or can't be activated).
The server is queried for fbconfigID to pixelformatindex mapping, which is
used to augment glx_config.
The server is queried for a native handle for the drawable (which is of a
different type for windows, pixmaps and pbuffers), which is used to augment
__GLXDRIdrawable.
Various GLX extensions are enabled depending on if the equivalent WGL
extension is available.
The Wayland Scanner pkg-config file is called wayland-scanner.pc.
Fixes: 153539bd9d ("configure: rework wayland_scanner
handling (fix make distcheck)")
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Tested-by: Eric Engestrom <eric.engestrom@imgtec.com>
Signed-off-by: Brendan King <Brendan.King@imgtec.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Step one to merging radv would be to move some files around.
This only adds the include path to r600/radeonsi, because later
we want to avoid having to add it to the generic target paths.
Acked-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
This pulls isl and genxml into a single make file so that they can properly
build in parallel. This isn't terribly important now as genxml just
generates sources which happens serially first anyway but it will be more
important as we add more stuff to src/intel.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Matt Turner <mattst88@gmail.com>
This option makes installed Vulkan ICD files contain only a driver library
name and not a path. This is intended for distros to help them work around
multi-arch issues.
Reviewed-by: Dave Airlie <airlied@redhat.com>
The Aubinator tool is designed to help the driver developers in debugging
the driver functionality by decoding the data in the .aub files.
Primary Authors of this tool are Damien Lespiau <damien.lespiau at intel.com>
and Kristian Høgsberg Kristensen <krh at bitplanet.net>.
v2: Review comments are incorporated by Sirisha Gandikota as below:
1) Make Makefile.am more crisp, reuse intel_aub.h from libdrm (per Emil)
2) Aubinator will use platform name instead of GEN number (per Matt)
3) Disassmebler gets created based on pciid rather then GEN number (per Matt)
4) Other formatting comments (per Ken, Matt and Emil)
Signed-off-by: Sirisha Gandikota <Sirisha.Gandikota@intel.com>
Acked-by: Kenneth Graunke <kenneth@whitecape.org>
Acked-by: Ben Widawsky <ben@bwidawsk.net>
Improves performance of OglBatch7 by 4.06851% +/- 1.17925% (n=169) on
Haswell, and cuts ~18k of .text:
text data bss dec hex filename
5824627 287816 29384 6141827 5db783 before/i965_dri.so
5806354 287816 29384 6123554 5d7022 after/i965_dri.so
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Jan Ziak (http://atom-symbol.net) <0xe2.0x9a.0x9b@gmail.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-and-Tested-by: Michel Dänzer <michel.daenzer@amd.com>
Not sure why I forgot to add them to CXXFLAGS in commit f55c408067 or
commit 875458b778. Cuts about 1k of .text.
text data bss dec hex filename
5806354 287816 29384 6123554 5d7022 i965_dri.so before
5805497 287744 29384 6122625 5d6c81 i965_dri.so after
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
According to the referenced bug report, gcc-4.5 and newer do not inline
memcmp(). I see no difference in performance of ipers with llvmpipe on a
Sandybridge (which does not have "Enhanced REP MOVSB/STOSB") by removing
this flag.
I attempted to confirm the problem with gcc-4.4, but it fails to compile
for quite a few different reasons.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
The help string wasn't updated in cbc37f7.
Fixes: cbc37f7 ("anv: install the intel_icd.json to ${datarootdir} by
default")
Signed-off-by: Andreas Boll <andreas.boll.dev@gmail.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Cc: mesa-stable@lists.freedesktop.org
Commit 1f4869a2 unconditionally requires pthread-stubs. Unfortunately, the
cleverness that pthread-stubs is doesn't work with PE/COFF, and historically
Cygwin doesn't have a pthread-stubs.pc.
Don't require pthread-stubs on Cygwin.
Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
Cygwin headers are now a bit more correct in handling feature test macros,
so use _GNU_SOURCE when building for Cygwin, as well.
(Notwithstanding f381c27c, we should probably have always been using
_GNU_SOURCE, since asprintf() is used by mesa in places)
Signed-off-by: Yaakov Selkowitz <yselkowi@redhat.com>
Reviewed-by: Jon Turney <jon.turney@dronecode.org.uk>
As mentioned by the spec (and used by Archlinux and Debian) default to
${datarootdir} as opposed to ${sysconfdir} for the default location.
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Do not rely on the git sha1:
- its current truncated form makes it less unique
- it does not attribute for local (Vulkand or otherwise) changes
Use a timestamp produced at the time of build. It's perfectly unique,
unless someone explicitly thinkers with their system clock. Even then
chances of producing the exact same one are very small, if not zero.
v2: Remove .tmp rule. Its not needed since we want for the header to be
regenerated on each time we call make (Eric).
v3:
- Honour SOURCE_DATE_EPOCH, to make the build reproducible (Michel)
- Replace the generated header with a define, to prevent needless
builds on consecutive `make' and/or `make install' calls. (Dave)
v4:
- Keep the timestamp generation at make time. (Jason)
v5:
- Ensure that file is regenerated on incremental builds.
Cc: Michel Dänzer <michel@daenzer.net>
Cc: Dave Airlie <airlied@gmail.com>
Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Encapsulate the test for which flags are needed to get a compiler to
support certain features. Along with this, give various options to try
for AVX and AVX2 support. Ideally we want to use specific instruction
set feature flags, like -mavx2 for instance instead of -march=haswell,
but the flags required for certain compilers are different. This
allows, for AVX2 for instance, GCC to use -mavx2 -mfma -mbmi2 -mf16c
while the Intel compiler which doesn't support those flags can fall
back to using -march=core-avx2.
This addresses a bug where the Intel compiler will silently ignore the
AVX2 instruction feature flags and then potentially fail to build.
v2: Pass preprocessor-check argument as true-state instead of
false-state for clarity.
v3: Reduce AVX2 define test to just __AVX2__. Additional defines suchas
__FMA__, __BMI2__, and __F16C__ appear to be inconsistently defined
w.r.t thier availability.
v4: Fix C++11 flags being added globally and add more logic to
swr_require_cxx_feature_flags
Cc: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Tim Rowley <timothy.o.rowley@intel.com>
Tested-by: Tim Rowley <timothy.o.rowley@Intel.com>
Signed-off-by: Chuck Atkins <chuck.atkins@kitware.com>
Otherwise drivers such as SWR that depend on providing their own values
will fail to build.
v2: Add -mcpu for good measure (Chuck)
Cc: "11.2 12.0" <mesa-stable@lists.freedesktop.org>
Cc: Tim Rowley <timothy.o.rowley@intel.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Chuck Atkins <chuck.atkins@kitware.com>
Tested-by: Chuck Atkins <chuck.atkins@kitware.com>
Now there are not files that require python 3, so for now just remove
the python 3 dependency and use python 2. I think the right plan is to
just get all of the python ready for python 3, and then use whatever
python is available.
Signed-off-by: Dylan Baker <dylanx.c.baker@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
cc: 12.0 <mesa-stable@lists.freedesktop.org>
Things have changed since commit a92910a ("glx: Refactor the configure
options for glx implementation choice (v3)") where only a single
configure option is used to control the GLX provider.
[Emil Velikov: Ensure that the check is moved after the detection code.]
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
With reference to the libglvnd branch:
https://cgit.freedesktop.org/mesa/mesa/log/?h=libglvnd
This is a squashed commit containing all of Kyle's commits, all but two
of Emil's commits (to follow), and a small fixup from myself to mark the
rest of the glX* functions as _GLX_PUBLIC so they are not exported when
building for libglvnd. I (ajax) squashed them together both for ease of
review, and because most of the changes are un-useful intermediate
states representing the evolution of glvnd's internal API.
Co-author: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Add weak symbol notation for the pthread_mutexattr* symbols, thus making
the linker happy. When building with -O1 or greater the optimiser will
kick in and remove the said functions as they are dead/unreachable code.
Ideally we'll enable the optimisations locally, yet that does not seem
to work atm.
v2: Add the AX_GCC_FUNC_ATTRIBUTE([weak]) hunk in configure.
Cc: Alejandro Piñeiro <apinheiro@igalia.com>
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: Rob Herring <robh@kernel.org>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Tested-by: Rob Clark <robdclark@gmail.com>
Tested-by: Mark Janes <mark.a.janes@intel.com>
Add support for EGL android platform.
Also, detect when --host finishes with -android. In that case, we
do not set _GNU_SOURCE, and define autoconf symbol HAVE_ANDROID, so
that Android-specific workarounds can be applied.
Signed-off-by: Nicolas Boichat <drinkcat@google.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
[Emil Velikov: Rebase on top of HAVE_EGL_PLATFORM_NULL removal]
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Add pthreadstubs to avoid pulling in full pthreads library. GBM will be the
first user.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
This fixes a recent linking error in libvulkan_common
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Andres Gomez <agomez@igalia.com>
Required functions into place for implementation, create screen
with device fd returned from X server, also bail out to DRI2
with certain conditions.
v2: -organize the error out path (Axel)
-squash previous patch 1 and 2 into one (Emil)
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Recent commit removed the winsys defines from anv_private.h thus
breaking the tests. To fix that and avoid it in the future, merge the
tests makefile in the libvulkan one.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
Instead of cascading support for various different implementations of
GLX, all three options are now specified through the --enable-glx
option:
--enable-glx=dri : Enable the DRI-based GLX
--enable-glx=xlib : Enable the classic Xlib-based GLX
--enable-glx=gallium-xlib : Enable the gallium Xlib-based GLX
--enable-glx[=yes] : Defaults to dri if DRI is enabled, else
gallium-xlib if gallium is enabled, else
xlib
This removes the --enable-xlib-glx option and fixes a bug in which both
the classic xlib-glx and gallium xlib-glx implementations were getting
built causing different versioned and conflicting libGL libraries to be
installed.
v2: Changes from various review feedback from Emil:
a) Fixed typos
b) Corrected help docs for new option
c) Added appropriate a-b and r-b tags in commit msg
d) Fixed various GLX related dependency checks.
v3: Rebased to current master and added changelog in commit msg
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94086
Acked-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
src/intel/genxml/gen_pack_header.py requires python3.
v2: check for python3.5 as well
Signed-off-by: Jonathan Gray <jsg@jsg.id.au>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
To avoid build issues, ensure that you're running `make' at the top level
and/or you've executed `make clean' beforehand.
Reviewed-by: Chad Versace <chad.versace@intel.com>
This adds a --with-vulkan-drivers option with one driver, "intel". In the
future, we may add more drivers to this list.
v2: Don't enable any drivers by default. This should prevent this patch
from breaking anyone's build.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
On the philosophy that a driver shouldn't change the compile flags
for the entire tree, take the clove approach of moving the c++11 flag
to the swr driver directory.
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
We have several places where the Vulkan driver explicitly hooks into
valgrind when it's available. We need to be able to detect it.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Rather than having two almost identical Makefiles, with various VPATH
hacks just fold them, using COMMON_* variables and actually getting
things buildable/shipable.
v2: whitespace fixes, remove Makefile.sources-arch
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Tim Rowley <timothy.o.rowley@intel.com>
... in order to determine if we need bison/flex. Failing to locate the
files will lead to mandating bison/flex even when building from a
release tarball.
CC: "11.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Matt Turner <mattst88@gmail.com>
It was useful for testing and as a prototype for radeonsi bringup,
but it's not used anymore and doesn't support OpenGL 3.3 even.
v2: try to fix OpenCL build
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Tested-by: Jan Vesely <jan.vesely@rutgers.edu>
Currently, configure script is forcing 'enable_asm' to be 'no'
whenever cross-compilation is performed on X86 host. This is
based on an assumption that target architecture is different
from host's (i.e. ARM). But there's always a case that we do
cross-compilation for target that is also X86 based just like
host in which same ASM codes will be supported. 'enable_asm'
should not be forced to be "no" anymore in this case.
v2: corrected commit message
Reviewed-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Dongwon Kim <dongwon.kim@intel.com>
Only enable it when we compile the state tracker as well.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Tested on Linux (centos, ubuntu, and suse variants)
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Acked-by: Jose Fonseca <jfonseca@vmware.com>
This will be needed to support converting from cycle counts to time for
performance related queries (initially time-elapsed, but there are some
additional performance counters that could be wired up).
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Change the name of the .so to libvulkan_intel.so and add an installable
icd with the installed paths. Keep the icd file with build-tree paths,
but rename to dev_icd.json to make it clear that it's for development
purposes.
We no longer need to build any part of Mesa with Windows SDK 7.0.7600 or
MSVC 2008. MSVC 2013 will be the oldest we support.
In practice this means people are now free to declare variables in the
middle of blocks, on the whole Mesa tree.
Care should still be taken with variable length arrays and void pointer
arithmetic.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Hella-acked-by: Ian Romanick <ian.d.romanick@intel.com>
Currently it's an empty library, although it'll be used to store common
code between GLSL and NIR that is compiler specific (rather than generic
as the one in src/util).
XXX: strictly speaking we could add a python/mako parser to generate the
relevant files instead including builtin_type_macros.h in such a manner.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Acked-by: Matt Turner <mattst88@gmail.com>
Acked-by: Jose Fonseca <jfonseca@vmware.com>
The ISO C99 standard (7.18.4) specifies that C++
implementations should define UINT64_C only when
__STDC_CONSTANT_MACROS is defined.
Because we now use UINT64_C in our cpp files (since commit
208bfc493d), we need to add this define.
This also solves compilation errors with GCC 4.8.x on ppc64le machines.
v2: add this define to SCons build system
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
For profiling mesa's code, especially llvmpipe, PROFILE should be
defined. Currently, this define can only be generated if mesa is
built using scons.
This patch makes it possible to generate this define also when building
mesa through automake tools.
v2:
- Change --enable-llvmpipe-profile to --enable-profile
- Add -fno-omit-frame-pointer to CFLAGS and CXXFLAGS when enabling profile
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
To determine if we could use special POWER8 assembly directives, we first
need to detect whether we are running on POWER8 architecture. This patch
adds this detection to configure.ac and adds the necessary compilation
flags accordingly.
v2:
- Add option to disable POWER8 instructions generation
- Detect whether building on BE or LE machine and build with
-mpower8-vector only on LE machine
- Make the printed messages more standard
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
v2. forgot bump for non-gallium driver
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Tested-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
This patch modifies the SSE4.1 test in configure.ac to use a global
variable to initialize vector variables. In addition, we now return the
value of the computation instead of 0.
This is done so gcc 4.9 (and lower) won't optimize the SSE4.1 assembly
instructions (when using -O1 and higher), because then the configure test
might incorrectly pass even though the assembler doesn't support the
SSE4.1 instructions (the test will pass because the compiler does support the intrinsics).
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91806
Cc: "11.0 11.1" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Check for a 'python2.7' binary, 'python' and 'python2' are not
provided by the OpenBSD python 2.7.x packages.
Signed-off-by: Jonathan Gray <jsg@jsg.id.au>
Cc: "11.0 11.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Use PKG_CHECK_MODULES to get the flags to link libelf
v2: keep AC_CHECK_LIB as a fallback for elfutils provided
libelf that doesn't install a pkg-config file.
Signed-off-by: Jonathan Gray <jsg@jsg.id.au>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Tested-by: Michel Dänzer <michel.daenzer@amd.com>
Cc: "11.0 11.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
The plan all along was to eventualyl move isl out of the Vulkan
directory, because I intended i965 and anvil to share it.
A small problem I encountered when attempting to write unit tests for
isl precipitated the move. I discovered that it's easier to get isl
unit tests to build if I remove the extra, unneeded dependencies
injected by src/vulkan/Makefile.am. And the easiest way to remove those
unneeded dependencies is to move isl out of src/vulkan. (Unit tests come
in subsequent commits).
Not too long ago, the dri3 code was living in src/glx, which in itself
was guarded by HAVE_DRI_GLX. As the name suggests we didn't dive into
the folder when dri was disabled, thus we missed that dri3 does not
consider/honour --enable-dri.
Cc: mesa-stable@lists.freedesktop.org
Fixes: 6bd9ba7d07 "loader: Add dri3 helper"
Cc: Pali Rohár <pali.rohar@gmail.com>
Reported-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
In the pipe-loader reworks, it was missed in one of the new directories it
was used.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
As of last few commits we have a static and dynamic pipe-loader. Either
of which will be used with (almost) all targets..
We can look into allowing the user to select which way the targets are
built, be that 'static for all' or 'per target' in follow up commits.
After which we can look into building only the static or dynamic
version, although building both shouldn't cause any issues.
Hack/workaround alert:
Control the standalone pipe-drivers via HAVE_CLOVER. Will need to be
fixed as the targets are converted/configure knobs are in.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Acked-by: Rob Clark <robclark@freedesktop.org>
... in favour of HAVE_LIBDRM. After all we solely want to build the code
when the latter is available.
In the not too distant future we will remove the libudev/sysfs
dependency and simplify configure.ac even further.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Acked-by: Rob Clark <robclark@freedesktop.org>
Will be used as a counterpart for target-helpers'
kms_swrast_create_screen().
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Acked-by: Rob Clark <robclark@freedesktop.org>
Using HAVE_DRI2 to manage it seems counter-intuitive.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Acked-by: Rob Clark <robclark@freedesktop.org>
The referenced variable(s) have been removed with commit abc20120e4
(automake: pipe-loader: remove the 'client' pipe-loader)
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Acked-by: Rob Clark <robclark@freedesktop.org>
v2: From Martin Peres
- Tell we are compiling the dri3 backend in configure.ac
- Update the Makefile.am
- get rid of the LIBDRM_HAS_RENDERNODE_SUPPORT macro
- fix some warnings related to EGLuint64KHR to int64_t conversions
- use dri2_get_dri_config to get the __DRIconfig instead of open-coding it
- replace the occasional tabs with spaces
v3: From Martin Peres
- fix and indent problem (Matt Turner)
- drop the authenticate function, use NULL in the vtable instead (Emil)
- drop some useless includes (Emil Velikov)
- mandate libdrm (Emil Velikov)
- link to xcb-dri3 (Kristian Høgsberg)
- convert to the new loader interface for drwable (Kristian)
- remove some dead code after the dropping of some vfuncs (Kristian)
- add a comment on the topic of rendering to the frontbuffer
v4: From Martin Peres
- do not expose the preserved swap behavior (Acked by Eric Anholt)
Signed-off-by: Boyan Ding <boyan.j.ding@gmail.com>
Signed-off-by: Martin Peres <martin.peres@linux.intel.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Emil Velikov <emil.velikov@collabora.co.uk>
v2: From Martin Peres
- Try to fit in the 80-col limit as much as possible
v3: From Martin Peres
- introduce loader_dri3_helper.la to avoid dragging the xcb dep everywhere (Kristian & Emil)
- get rid of the width, height, dri_screen and is_different_gpu vfuncs (Kristian)
- replace the create/destroy functions with init/fini for dri3 drawables
- prefix static functions with dri3_ and exported ones with loader_dri3 (Emil)
- keep the function definition consistent (Emil)
Signed-off-by: Boyan Ding <boyan.j.ding@gmail.com>
Signed-off-by: Martin Peres <martin.peres@linux.intel.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Emil Velikov <emil.velikov@collabora.co.uk>
Emil Velikov
Tobias Droste
Ilia Mirkin
Boyan Ding
Edward O'Callaghan
Dave Airlie
Vinson Lee
Chad Versace
Andreas Boll
Jose Fonseca
Tomasz Figa
Nayan Deshmukh
Jonas Ådahl
Chuck Atkins
Christian Gmeiner
The etnaviv authors
Eric Anholt
Rob Clark
Mauro Rossi
Marek Olšák
Gurchetan Singh
Emil Velikov
Jason Ekstrand
Lionel Landwerlin
Nicolai Hähnle
Steven Toth
Timothy Arceri
Tim Rowley
Jon Turney
Brendan King
Matt Turner
Eric Engestrom
Jason Ekstrand
Kristian Høgsberg Kristensen
Jan Ziak
Rob Clark
Yaakov Selkowitz
Serge Martin
Akihiko Odaki
Dylan Baker
Kyle Brenneman
Nicolas Boichat
Rob Herring
Andres Gomez
Leo Liu
Jonathan Gray
Dongwon Kim
Christian König
Kristian Høgsberg Kristensen
Jan Vesely
Oded Gabbay
Ben Skeggs
Chad Versace
Boyuan Zhang